pilot43

My Feedback: (3)

-insert bind plug In receiver.
-Connect feeding a receiver, indicators twinkle -press bind on transmitter and include the transmitter.
The Indicators on receiver anymore glow.
The Receiver does not work.
That I do wrong?
Help please, who can!

BuschBarber

My Feedback: (2)

Insert the Bind Plug in the Bind Port on the receiver
Plug a battery into the receiver either Directly, or through a switch harness
When receiver is powered up, the lights will Blink
Press and Hold the Bind Button on the transmitter and turn on the transmitter
The lights on the receiver should go Out and then come back on, Solid

Be sure you have the Satellite (Remote) receivers plugged in to the Main Receiver before you Bind
Be sure you are not near any large metal buildings as that will keep the receiver from binding

Try just plugging in one servo, one battery, without the switch harness, and all the Satellite receivers
Now Bind and see if that works

Be sure your receiver battery and transmitter battery are well charged