AR600 & AR6210 What is the difference
#1
Member
Thread Starter
My Feedback: (16)
Join Date: Sep 2003
Location: Edmonton,
AB, CANADA
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
AR600 & AR6210 What is the difference
I am putting a receiver into an electric 50" Edge 540.
I have a DX8 transmitter.
I need a 6 channel receiver.
Which receiver should I buy? And what is the difference between the two?
I have a DX8 transmitter.
I need a 6 channel receiver.
Which receiver should I buy? And what is the difference between the two?
#2
My Feedback: (11)
RE: AR600 & AR6210 What is the difference
ORIGINAL: ADANAC18
I am putting a receiver into an electric 50'' Edge 540.
I have a DX8 transmitter.
I need a 6 channel receiver.
Which receiver should I buy? And what is the difference between the two?
I am putting a receiver into an electric 50'' Edge 540.
I have a DX8 transmitter.
I need a 6 channel receiver.
Which receiver should I buy? And what is the difference between the two?
Edit: Note that Horizon markets the 600 as a full range reciever, and I use it in a Radian Pro so it does have excellent range, but in your application I'd still prefer the dual reciever installation of the 6210
#4
Senior Member
Join Date: Jun 2010
Location: Sydney, AUSTRALIA
Posts: 4,786
Likes: 0
Received 0 Likes
on
0 Posts
RE: AR600 & AR6210 What is the difference
ORIGINAL: ADANAC18
Thank you for the info.
I will go with the AR6210.
I like the idea of the satalite receiver.
Thank you for the info.
I will go with the AR6210.
I like the idea of the satalite receiver.
the satellite receivers really work.. any one of the 4 antenna on the combined main / satellite rx will provide enough reception to operate the system in line of sight..
having 4 gives you great redundancy..
#5
My Feedback: (110)
Join Date: Apr 2005
Location: newtowne sq.,
PA
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
RE: AR600 & AR6210 What is the difference
go to horizon hobby and look at the ar600,rx there reviews on it..some not good. some however are ok so i guess it's a toss up.i would go with the 6210 for sure......RON ...........there is a 20.00 price difference.......but..........
#6
Junior Member
Join Date: Jan 2011
Location: Orlando, FL
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: AR600 & AR6210 What is the difference
I was flying with an AR500 back in January. I had a confirmed brown-out failure which caused a crash. Range was not an issue. I was just decending from >1,000 ft in a dynaflight butterfly. On final approach, lost control and sprialed down OOC.
Sent the Tx/Rx back to HH. They would not admit fault, but sent me out a new Dx5e (DSMX)with an AR600. I now have about 7 flights on the AR600 without any issues. This in in smaller electric glider (FWIW).
I upgraded to the AR6210 for the butterfly. That plane can fly so high, that I really wanted the extra safety of a sat Rx. I feel much better know.
Everyone I have talked to says the AR600 is reliable. It just looks TOO much like the AR500 for me to feel great about it for now.
There is a reason why HH has put great big orange stickers that says "Now included AR600 with DSMX". Even if they wont admit it, they lost a lot of credibility with the high failure rates on the AR500 units.
I was amazed that the problems with the AR500 was all over the internet when I searched (post crash). Their support staff seemed to have NO idea that there was an issue. Really? !!
My company would have issued a full scale recall rather that allow the reputaion to be damaged. ......Whatever.
mark
Sent the Tx/Rx back to HH. They would not admit fault, but sent me out a new Dx5e (DSMX)with an AR600. I now have about 7 flights on the AR600 without any issues. This in in smaller electric glider (FWIW).
I upgraded to the AR6210 for the butterfly. That plane can fly so high, that I really wanted the extra safety of a sat Rx. I feel much better know.
Everyone I have talked to says the AR600 is reliable. It just looks TOO much like the AR500 for me to feel great about it for now.
There is a reason why HH has put great big orange stickers that says "Now included AR600 with DSMX". Even if they wont admit it, they lost a lot of credibility with the high failure rates on the AR500 units.
I was amazed that the problems with the AR500 was all over the internet when I searched (post crash). Their support staff seemed to have NO idea that there was an issue. Really? !!
My company would have issued a full scale recall rather that allow the reputaion to be damaged. ......Whatever.
mark
#7
RE: AR600 & AR6210 What is the difference
I have both RX. The AR600 in my Apprentice, and the 6210 in the T-34 Mentor. One is foam, the other plywood. They both work equally well, good range, no faults, have over a dozen flights on the the Apprentice.
Would I put the AR600 in a wood plane? Nope, but I wouldn't have to put a 6210 in a foam plane either. Each one has it's own purpose.
Would I put the AR600 in a wood plane? Nope, but I wouldn't have to put a 6210 in a foam plane either. Each one has it's own purpose.