Scoubidou

My Feedback: (17)

Hi Danny
I would like to programm my TX XF631 to get the flaperons going ''up'' instead of going down when i use the channel 6 switch with my Extra300L.
I have tried the reverse flap option but i did not work because the ailerons go in full deflection (left goes up and right aileron goes down).

Is it possible to programm that radio to have spoilers?
Daniel

dsnyder

Go to the travel adjust function, flip the switch to the position where you want the ailerons to go up as spoilers, and zero the flap channel travel. Then make sure there is a percentage in the other switch position, which likely would be around 100%. Now if the ailerons are moving as flaps, swap the channels at the receiver that the servos are plugged into. It won't affect your aileron direction, but will reverse the flaps. It will however also reverse the differential function as well, if you are using differential, and the differential is working backwards, you will need to reverse switch positions, and reset as stated above.

Scoubidou

My Feedback: (17)

Thanks for tip Danny, it works now!

In the meantime, i ordered a new TX 8103T. I will keep the XF631 as a back up

dsnyder

Good to hear in both cases! Let us know if you have any further questions.