Flaperon with 622
11-03-2004, 02:43 PM
#1
Thread Starter
My Feedback: (197)
Join Date: Aug 2004
Location: Castalia,
OH
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Flaperon with 622
I have a wild hare 540 with the 622 and slimline 700 trying to use the flaperon setting and I'm getting more travel on the right servo than on the left???? New to computer radios....
11-03-2004, 03:02 PM
#2
RE: Flaperon with 622
Go to the travel adjust function, and zero the flap channel travel in one flap switch position at least, if you want no flap function from the switch, zero the travel of the flap channel in both positions. Set the servo plugged in to channel 6 up mechanically to get the throw desired, then set up the servo plugged into channel 2 mechanically the same, and then use travel adjust of the aileron channel to make the throws match as necessary. If you want to increase or decrease the throw on both channels, use the dual rate function.
