Aerosplat

My Feedback: (12)

Danny,
I have the HELI version of the 9303. As you know, there are differences in the physical layout of the HELI version and the AIR version. The trainer / Snap roll switch on the HELI version is indeed a spring loaded switch on the top left bottom of the case. The 3 position flight mode switch is in a different location (top left top). Switch labels on the case is different.

Problem [], all of your Manuals show only the AIR version of the case, and the switch locations layout refer to the AIR version only. Look at page G9 in any of the manuals. Even in the Heli manual that came with my 9303, the pictures and switch layout are of the AIR version. [&o]

I would VERY MUCH like to see 1.) The actual HELI version picture and switch layout /reference when programming a Heli with the HELI version, and 2.) The actual HELI version picture and switch layout / reference when programming an Airplane on the HELI version.

Can this be provided ?

dsnyder

I'm sorry to say that I don't have that documentation available.

Aerosplat

My Feedback: (12)

Danny,
Thanks for the reply. Is this an issue that Horizon or JR can address in the near future? I really believe customers would like to have documentation that matches their product.

dsnyder

I'll pass it on for consideration. There are only 3 switch differences, so it shouldn't be a large issue.