MC 12
#1
Thread Starter
Join Date: Aug 2005
Location: Zagreb, CROATIA (HRVATSKA)
Posts: 47
Received 0 Likes
on
0 Posts
MC 12
Hi,
i installed switch for flaps with 3 positions.Servo is conected to ch 6 on receiver and switch is conected to socket 6 on transmiter acc.
schematic in manuall.I would like to have movement of flap in increament but it works only in full movement on both side.
How can i solve this problem.
Thanks!
Danijel
i installed switch for flaps with 3 positions.Servo is conected to ch 6 on receiver and switch is conected to socket 6 on transmiter acc.
schematic in manuall.I would like to have movement of flap in increament but it works only in full movement on both side.
How can i solve this problem.
Thanks!
Danijel
#2
RE: MC 12
I'm sorry to say that I don't have any experience or knowledge of that system. You will need to contact Graupner for assistance, the number I have listed for them is 49-7021-722-0.