Jr Recievers
#1
Junior Member
Thread Starter
My Feedback: (54)
Join Date: Aug 2004
Location: Buckeye, AZ
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Jr Recievers
I was wondering what your receivers are compatible with I just picked up 2 of JR recievers has part of a trade a R770s and R700 I have futaba and hitec radios
#2
Junior Member
Join Date: Mar 2006
Location: , NS, UNITED KINGDOM
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: Jr Recievers
Hi mate i have used all kinds of recivers and you will be fine as long as they are not duel coversion type but you must use the cystals of the make of transmitter you are using hope this is use to you
jess
jess
#4
Senior Member
Join Date: Apr 2005
Location: BloemfonteinFree State, SOUTH AFRICA
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
RE: Jr Recievers
Jess,
The Futaba, Hitec and Towers are Negative shift (carrier - 5 Khz)= ON. The Airtronics and JR are Positive shift (carrier + 5 kHz)= ON. Carrier only is OFF for both
The Futaba, Hitec and Towers are Negative shift (carrier - 5 Khz)= ON. The Airtronics and JR are Positive shift (carrier + 5 kHz)= ON. Carrier only is OFF for both
#5
Senior Member
My Feedback: (5)
Join Date: Mar 2002
Location: Clarks Summit, PA
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
RE: Jr Recievers
You can use the JR receivers with the HITEC or AIRTRONICS transmitters that let you chose to use negative or positive. This is accomplished by making a choice in the programming.
#7
RE: Jr Recievers
Yes, you can shave the tab off of the Futaba connectors to make them fit JR. To install a speed control, most plug the speed control into the throttle channel.