19x to 9x2 data transfere
#3
Senior Member
Join Date: Jul 2003
Location: Slough, UNITED KINGDOM
Posts: 1,415
Likes: 0
Received 0 Likes
on
0 Posts
RE: 19x to 9x2 data transfere
I believe that Mark is about to release ver 1.9 (downloadable from the web) to take into account the 2 versions of the 10X.
By that I mean the 10X came out in 2 versions with 2 variants, 10X Aero & 10X Heli. BUT the initial release of these 2 variants did not have ZPCM in the firmware. JR Propo then released the next versions with ZPCM.
So, if your 10X has ZPCM, it is covered by the current ver 1.8 of DataXchange, if it doesn't have ZPCM then ver 1.9 will be able to correctly read the 10X data.
Hope that makes sense.
By that I mean the 10X came out in 2 versions with 2 variants, 10X Aero & 10X Heli. BUT the initial release of these 2 variants did not have ZPCM in the firmware. JR Propo then released the next versions with ZPCM.
So, if your 10X has ZPCM, it is covered by the current ver 1.8 of DataXchange, if it doesn't have ZPCM then ver 1.9 will be able to correctly read the 10X data.
Hope that makes sense.