LiPo power for JR 10X
#1
Thread Starter
My Feedback: (5)
Join Date: Apr 2003
Location: Northport, AL,
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
LiPo power for JR 10X
Is anyone using LiPo (11.1 volts) batteries in the JR 10X and what are the results? Any problems with the higher than normal NiCad (11.2 +/- @ full charge) volts? Have the LiPo batteries installed but have reservations about the excess voltage from the pack damaging the transmitter. Thanks!!! Fastasp
#3
Member
Join Date: Oct 2004
Location: HKG, HONG KONG
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
RE: LiPo power for JR 10X
It may not be recommended, but here's my results on a 9XII (9303). Used to use Sanyo 2100mah (self drained like hell), get 2 days of flying.....now I have 1900mah Lipos...No voltage drop after storing for a week.......the transmitter is noticeably lighter....I get 6 days flying no problems....get bored when I read 11.4-11.2v on the TX so I recharge. Ever seen your TX with 12.6v using those AA cells? Having been running for over 6 months and I'm happy!