dx7 help
07-22-2009, 08:29 PM
#1
Junior Member
Thread Starter
My Feedback: (1)
Join Date: Mar 2009
Location: pass christian, MS
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
dx7 help
i have a dx7 and the problem is that i fly with the ailerons and throttle on left and the
elevator and rudder on right!
im not sure if this is considerd mode 1 or not.
so my question is....can the dx7 be switched to mode 1 or can i change the stick
formation in the programming?
thanks
elevator and rudder on right!
im not sure if this is considerd mode 1 or not.
so my question is....can the dx7 be switched to mode 1 or can i change the stick
formation in the programming?
thanks
07-23-2009, 02:08 AM
#4
RE: dx7 help
G'day Mate,
That would be mode 3 or 4, just use a mode 2 TX, & swap the rudder & aileron servos in the RX.
Easy, but remember that they have been swapped, when you make adjustments.
That would be mode 3 or 4, just use a mode 2 TX, & swap the rudder & aileron servos in the RX.
Easy, but remember that they have been swapped, when you make adjustments.
