Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Results 1 to 11 of 11

  1. #1
    Kevin Y's Avatar
    Join Date
    Dec 2004
    Location
    Mooresville, NC
    Posts
    42
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    JTEC CANISTER DEVELOPMENT

    We are in the testing stages of our new canisters designs. So far we have been getting great results but are still testing them on several different engines.

    Currently our first release will be for the 40 to 65cc single cyclinder or up to the 100-120cc twin displacement. Price point will be about $135 each or $270 per set. not including header systems

    We have not done headers yet but will start looking building these once we have released several canister designs.

    As with all our exhaust systems they are proudly made right here in our facility in Mooresville NC, USA!!!!!!!!!!

    Please feel free to contact us if you have any questions. we will be happy to work with you.

    As always we thank you for your support.

    Al Young
    JTEC/RADIOWAVE
    www.jtecrc.com
    www.futaba-rc.com
    www.desertaircraft.com
    www.composite-creations.com

  2. #2

    Join Date
    Mar 2002
    Location
    Kannapolis, NC
    Posts
    7,415
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: JTEC CANISTER DEVELOPMENT

    North Carolina Rules yeah Baby! JTEC
    smooth as silk!

  3. #3
    Jerry_Hailey's Avatar
    Join Date
    Aug 2005
    Location
    lexington, NC
    Posts
    97
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: JTEC CANISTER DEVELOPMENT

    I got to put my eyes on these cans at a swap meet last week. Al - you have done a nice job, I was impressed with how light your cans are, and knowing how well all of your mufflers work, I'm sure these will work great.

    Nice to see a product made in North Carolina priced better than an import.

  4. #4

    Join Date
    Dec 2004
    Location
    Knightdale, NC
    Posts
    75
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: JTEC CANISTER DEVELOPMENT

    What they said !

    Jason

  5. #5

    Join Date
    Oct 2010
    Location
    Dunn, NC
    Posts
    7
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: JTEC CANISTER DEVELOPMENT

    Anyone have experience with these yet?


  6. #6
    Kevin Y's Avatar
    Join Date
    Dec 2004
    Location
    Mooresville, NC
    Posts
    42
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: JTEC CANISTER DEVELOPMENT

    Actually in the North Carolina area we have quite a few guys running the canisters. The majority of our customers seem to be running them on the DA 100, DL 100/111, DA50, DL50/55 with good sucess. We have done a fair amount of testing with those engines have gotten great numbers especially out of the DL's. On the DL, they seemed to get more rpm then a couple of the other brand canisters we tested.
    www.jtecrc.com
    www.futaba-rc.com
    www.desertaircraft.com
    www.composite-creations.com

  7. #7
    bemeson's Avatar
    Join Date
    May 2007
    Location
    PARKER, CO
    Posts
    266
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: JTEC CANISTER DEVELOPMENT

    What king of improved rpms on DLE55. I live in Colorado at 5900 and I need a few more rpms. I was thinking on going with your big canister pitts, but will the cans give superior performance. If so what is the weight difference between the cans and the pitts.

    Thanks
    Brian

  8. #8
    Kevin Y's Avatar
    Join Date
    Dec 2004
    Location
    Mooresville, NC
    Posts
    42
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: JTEC CANISTER DEVELOPMENT

    Brian,

    Canisters are not designed to give you an increase in performance, they are really for sound. On average you will see about a 3-4 db drop in sound over a good wrap around pitts muffler or side mound muffler. The rpm numbers should be the same whether it is a wrap around, side mount or canister. If you are looking for a power increase there are two things you can do. Play with props, at your altitude I would say keep the diameter down to a 22" or 23". The second thing is a tuned pipe like a ks 1060 or mtw re2. Tuned lips are the only type of exhaust in which you will see a power increase. On average you will see about 400 more rpm.

    Kevin Young
    www.jtecrc.com
    www.futaba-rc.com
    www.desertaircraft.com
    www.composite-creations.com

  9. #9
    bemeson's Avatar
    Join Date
    May 2007
    Location
    PARKER, CO
    Posts
    266
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: JTEC CANISTER DEVELOPMENT

    Kevin,
    I appreciate the information....With your cannisters are you saying you will get the same rpm out them as you get in the stock DLE muffler, but it will quiet the motor down. If that is correct, that would be the ticket....I am worried about losing RPM cause I need all I can get. What is the weight of the cannister....how much heavier is the cannister as compared to one of your small pitts muffler for a DLE55. I have flown with a RE2 and the pipes seem to be a bit peaky and they come on at the tail end of the powerband.

    Thanks
    Brian

  10. #10
    Kevin Y's Avatar
    Join Date
    Dec 2004
    Location
    Mooresville, NC
    Posts
    42
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: JTEC CANISTER DEVELOPMENT

    Brian,

    Yeah, as I said on the phone the other day you should see the same rpm numbers with a canister as the stock muffler. For the weight of a canister system you are probably looking at 1lbs. or so, figure the canister will weight approx 10 or 11oz and then the header coupler and clamp weight probably another 5-6 oz. A standard wrap around pitts will weight 9oz and again gets the same rpm numbers as the stock side mount muffler. One thing with a canister is technically you still may see a peakiness in your throttle response just like a tuned pipe, it all depends on header length. If you are looking for the most hastle free setup then I would suggest just a wrap around pitts muffler, it is nice and simple.
    www.jtecrc.com
    www.futaba-rc.com
    www.desertaircraft.com
    www.composite-creations.com

  11. #11

    Join Date
    Mar 2012
    Location
    , NB, CHINA
    Posts
    4
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: JTEC CANISTER DEVELOPMENT

    Fashionable objects are in huge demand nowadays. People are becoming more and more self conscious about their looks and outfits. Eyewear serves to be one such fashionable accessory that not only fulfills the purpose of supporting Ray Ban sunglassesyour vision but also makes a remarkable stylish item. The consumer market is overflowing with numerous brands of eyeglasses which are competing amongst themselves to remain on the top. Ray Ban glasses are one such brand name which doesn't need much of an introduction as its overwhelming quality speaks for itself. They are known to strive hard in order to achieve absolute perfection and excellence.aviator sunglasses
    RayBan glasses have always offered authenticated products for the potential buyers for many years. Since the time of their launch, these eyeglasses have become immensely popular because of their unique classy designs and stylish looks. Primarily, these eyeglasses were invented for the United States Air Force as the pilots required protection for their eyes from the vibrant sunrays. They were specifically made up of lenses that were used to filter out the harmful UV rays. These glasses were so widely accepted by pilots in those days that they became big brand names such as Ray-Ban Aviators and Ray-Ban Wayfarer.
    The popularity of Ray-Ban glasses is also evident in the film industry as numerous high profile celebrities prefer to wear these eyeglasses. They are so intricately designed that each and every piece looks strikingly appealing. It particularly shows the skilled craftsmanship that is gone into creating this designer eyewear that makes it look so different from the other branded products.ray ban wayfarer These glasses can be worn by anyone irrespective of their gender. There are made available in numerous designs that cater to the varied interests of both men and women. One of the most striking features of Ray-Ban glasses iRay Ban s that they are made up of high quality polarized lenses. These lenses are known to adjust themselves as per the lighting conditions. This particularly results into reducing eye fatigue and keeps your eyes well-protected.ray ban glasses
    When it comes to RayBan glasses frames, they are mostly made up of carbon fiber or titanium. Ray Ban Aviator There is a wide collection of such designer frames that is being specifically created in order to match any kind of facial structure. These varied frame designs are further differentiated into rimless and semi-rimless. The temple pieces in Ray-Ban glasses frames are inserted with rubber in order to ensure that the glasses do not slip off. The frames look light weighted but they are extremely sturdy and strong that can withstand any amount of force.
    One of the best places to locate Ray Ban glasses is toray ban sunglasses sale browse through the numerous optical websites. They provide you with an opportunity to access their designs and make a comparison of their prices. In fact, it is being observed that various attractive deals and discounts on such branded eyewear are acquired from reliable online stores. Ray-Ban glasses indeed serves to be the most perfect eyewear that makes you look confident and gives out a sophisticated aura. Opt for them now!cheap baltimore ravens


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -6. The time now is 10:54 AM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.