vt-flier

Hey guys need a little assistance...
A couple weeks ago I took out the manual in preperation for the winter build but when I went looking for it this weekend it has disappeared[X(] Not sure if my lovely wife "misplaced it" during one of her cleaning frenzies or if I put it someplace for safe keeping but I spent the entire weekend searching and I can't find it[:@] The CG website has just about every manual available online except the Staudacher (of course... )
So.... if you have the manual and could scan and send it to me I'd greatly appreciate it. [8D] Thanks
Mike

jcubby

My Feedback: (2)

In the Technical support page at the Carl Goldberg site they have an e-mail address for replacement manuals. Might be worth a try.

Site: http://www.carlgoldbergproducts.com/...ort/index.html

Good Luck

PS: I have a friend with one of these, and it flies great! He is the 3rd owner of this plane no Manual.

vt-flier

jcubby thanks for the link, i didn't see that page.
mike

chapell123

VT flier,

I have the same problem, Trying to find other kit by Carl to see if I can work through it. I think my inst. manual got tossed with the paper.
Let me know on email if you have any luck please. I will get to you as well if I find anything.
Paul

[email protected]

vt-flier

chapell123,
I sent you a pdf copy of the manual i received from Mary Ann at Hobby Services Parts Support ([email protected]). Now i just need to find the time to get down to the basemennt and create some balsa dust
Good Luck with your build.
Mike

chapell123

Mike,

I would really appreciate that. I checked email and still haven't received.
Waiting with CA in hand.

Thanks again.

Paul
[email protected]

vt-flier

Strange... Email client shows it was sent Wednesday. I'll try again with a different account.
Mike

chapell123

Mike,

I got them. Thanks a bunch.
I'm in Oshawa, Ontario, Canada.
If you ever need anything give me a shout.

Thanks again.
Paul

vt-flier

Great! Now start that build.
Started on mine a couple days ago. Finished the tail feathers and working on the wing now. A couple ribs had to be resized but other than that everything's gone together great. It's been a couple years since I've built a kit and now I'm wondering why I've waited so long.
If you need anything else just let me know.
mike

chapell123

Right on,

Have an eye the rib doubler at 6 shows on the plan to go on the inside book says outside. I think outside.

Paul

vt-flier

I followed the book and put it on the outside too.

Did you have a problem with ribs 1 and 2? Rib 1 was too long and rib #2 was too short. Easy fix with a little sandpaper and some scrap balsa.

Mike

chapell123

Mike,

Yeah same problem. One was too short . Doubler for 6 marked 2. #2 rib marked A. #1 Rib blank and too long and a couple others too short.
Anyways plowing through it. On right wing now tail feahers done and left side bottom of wing done.
Will post some picks soon.

Paul