Top Flite Giant P-47 Build
#351
Thread Starter
My Feedback: (6)
RE: Top Flite Giant P-47 Build
No inner doors. I would have to buy a sequencer and cylinders to operate them and this project just isn't worth the added expense. I am going to put the fill valve, pressure gauge, and switches in the compartment that I made. I did epoxy the tank in the fuse where indicated on the plans.
#352
Thread Starter
My Feedback: (6)
RE: Top Flite Giant P-47 Build
I thought I would point out that I will probably mount the ignition switch somewhere other than the compartment that I made. As Fabio pointed out, practicality sometimes wins over scale. I have the Spektrum 12ch. Power Safe receiver, and I will be running dual ED Nano 2300mah A123's.
#353
Member
Join Date: Apr 2012
Location: MASHPEE, MA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Giant P-47 Build
You aren't worried about having to replace the tank at any point? If it's epoxy'd then there really is no way to get it out... That was only my main concern.
I do actually remember the hatch for the fill valve etc now. I might do that as well.
Love what you did with the retract doors that is a really clever idea and it does give it a really nice scale look.
#361
Thread Starter
My Feedback: (6)
RE: Top Flite Giant P-47 Build
The compressor I was using didn't have enough CFM to keep up with the HVLP guns I have, so I bought me one that would. I also decided to use Klass Kote epoxy paint on this and I didn't want to have pressure problems when spaying it.
I'm also going to place an order with Mirce for his finish set in 1/6 scale. Some of you might be following his Meister Scale build over in Warbirds. Although P-47's have flush rivets, I think I can get pretty close to scale with his finish set and not spend weeks burning rivets.
Here are a few photos of how Mirce's bird is coming along, Amazing!
I'm also going to place an order with Mirce for his finish set in 1/6 scale. Some of you might be following his Meister Scale build over in Warbirds. Although P-47's have flush rivets, I think I can get pretty close to scale with his finish set and not spend weeks burning rivets.
Here are a few photos of how Mirce's bird is coming along, Amazing!
#362
Member
My Feedback: (3)
Join Date: Jul 2011
Location: Cameron,
WI
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Giant P-47 Build
ORIGINAL: redbiscuits
The compressor I was using didn't have enough CFM to keep up with the HVLP guns I have, so I bought me one that would. I also decided to use Klass Kote epoxy paint on this and I didn't want to have pressure problems when spaying it.
I'm also going to place an order with Mirce for his finish set in 1/6 scale. Some of you might be following his Meister Scale build over in Warbirds. Although P-47's have flush rivets, I think I can get pretty close to scale with his finish set and not spend weeks burning rivets.
Here are a few photos of how Mirce's bird is coming along, Amazing!
The compressor I was using didn't have enough CFM to keep up with the HVLP guns I have, so I bought me one that would. I also decided to use Klass Kote epoxy paint on this and I didn't want to have pressure problems when spaying it.
I'm also going to place an order with Mirce for his finish set in 1/6 scale. Some of you might be following his Meister Scale build over in Warbirds. Although P-47's have flush rivets, I think I can get pretty close to scale with his finish set and not spend weeks burning rivets.
Here are a few photos of how Mirce's bird is coming along, Amazing!
HOLYCRAP!
Yeah, I'm just a little in awe.
#365
Thread Starter
My Feedback: (6)
RE: Top Flite Giant P-47 Build
That's kind of a hard question Fabio. I new that I was going to use a paint that was not available in spray cans going into this. So I thought that this would be a good way to learn how to use a gun. Also I wanted a good bond between the paint and the primer, I don't want any of the paint pulling up when I do the invasion stripes. I have heard of guys having problems when using can primer when they get to that stage. Also, I thought it would be a little cheaper compared to buying a single can of primer for around $6.00
#367
Thread Starter
My Feedback: (6)
RE: Top Flite Giant P-47 Build
As much as I hate it, I picked them up at HobbyKing when I bought my muffler. 10 of them come in a pack for $1.49. Pretty good compared to Dreamworks or BVM. I don't like getting things from China, but sometimes a man has to do what a man has to do.
http://www.hobbyking.com/hobbyking/s...idProduct=8230
http://www.hobbyking.com/hobbyking/s...idProduct=8230
#369
Senior Member
Join Date: Sep 2003
Location: Bend,
OR
Posts: 1,052
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Giant P-47 Build
ORIGINAL: redbiscuits
As much as I hate it, I picked them up at HobbyKing when I bought my muffler. 10 of them come in a pack for $1.49. Pretty good compared to Dreamworks or BVM. I don't like getting things from China, but sometimes a man has to do what a man has to do.
http://www.hobbyking.com/hobbyking/s...idProduct=8230
As much as I hate it, I picked them up at HobbyKing when I bought my muffler. 10 of them come in a pack for $1.49. Pretty good compared to Dreamworks or BVM. I don't like getting things from China, but sometimes a man has to do what a man has to do.
http://www.hobbyking.com/hobbyking/s...idProduct=8230
Andy
#370
Thread Starter
My Feedback: (6)
RE: Top Flite Giant P-47 Build
No problem Andy.
I did order Mirce's Warbird Finish Set from Mirce. I'm looking forward to getting that in the next week or so, and I will make a video when it arrives. The set comes with panel line tape and over 15,000 rivets and screws.
A bargain at $69.00+$10 shipping from Yugoslavia.
I did order Mirce's Warbird Finish Set from Mirce. I'm looking forward to getting that in the next week or so, and I will make a video when it arrives. The set comes with panel line tape and over 15,000 rivets and screws.
A bargain at $69.00+$10 shipping from Yugoslavia.
#374
Senior Member
Join Date: Sep 2003
Location: Bend,
OR
Posts: 1,052
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Giant P-47 Build
ORIGINAL: redbiscuits
No problem Andy.
I did order Mirce's Warbird Finish Set from Mirce. I'm looking forward to getting that in the next week or so, and I will make a video when it arrives. The set comes with panel line tape and over 15,000 rivets and screws.
A bargain at $69.00+$10 shipping from Yugoslavia.
No problem Andy.
I did order Mirce's Warbird Finish Set from Mirce. I'm looking forward to getting that in the next week or so, and I will make a video when it arrives. The set comes with panel line tape and over 15,000 rivets and screws.
A bargain at $69.00+$10 shipping from Yugoslavia.
#375
Member
My Feedback: (3)
Join Date: Jul 2011
Location: Cameron,
WI
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Giant P-47 Build
ORIGINAL: oldtyme
Whoa........hey Gary.........let me know what that package looks like and how I get one. I was not going to do panel lines and rivets but that sounds like I might be tempted. More info please...................
ORIGINAL: redbiscuits
No problem Andy.
I did order Mirce's Warbird Finish Set from Mirce. I'm looking forward to getting that in the next week or so, and I will make a video when it arrives. The set comes with panel line tape and over 15,000 rivets and screws.
A bargain at $69.00+$10 shipping from Yugoslavia.
No problem Andy.
I did order Mirce's Warbird Finish Set from Mirce. I'm looking forward to getting that in the next week or so, and I will make a video when it arrives. The set comes with panel line tape and over 15,000 rivets and screws.
A bargain at $69.00+$10 shipping from Yugoslavia.
www.nsmodelers.rs/home/mirce-finish-set
Neil