***CUB BROTHERHOOD***
01-10-2014, 02:15 PM
#1453
I made a quick run out to the airport today and got these shots. Over height of the logo is 8-3/8". I think my hand slipped just a tad when I took the close up pic. Hope this helps.
01-10-2014, 04:51 PM
#1456
Join Date: Nov 2005
Location: Yakima, WA
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
01-12-2014, 09:15 PM
#1458
My Feedback: (2)
Join Date: Sep 2011
Location: Knoxville, TN
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
I would like to be in the club guys. I have a 20 year old Sig 1/6 scale cub. Man was that a kit for a then 15 year old to build. I'm getting ready to start building a Goldberg for the spring. Got a question for you guys. Will the Hangar 9 40 size cub gear fit the Goldberg? I would build in landing gear grooved blocks if it's the same width.
Thanks,
Thanks,
01-14-2014, 07:41 PM
#1463
Mr Punk,
Take a look at post #91 in this link http://www.rcuniverse.com/forum/arf-...er-moth-4.html.
It shows a pic of a custom landing gear I made for my 1/5 Cub. Having the springs working in compression is much better than using bungee or o-rings as it prevents the landing gear from completely pancaking.
rafeek
Take a look at post #91 in this link http://www.rcuniverse.com/forum/arf-...er-moth-4.html.
It shows a pic of a custom landing gear I made for my 1/5 Cub. Having the springs working in compression is much better than using bungee or o-rings as it prevents the landing gear from completely pancaking.
rafeek
01-14-2014, 07:44 PM
#1464
My Feedback: (1)
Join Date: Apr 2002
Location: dequincy ,
LA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Going back to tail wheel assembly, Sig has a very realistic assembly ,a little heavy but at a very good price
http://www.sigmfg.com/cgi-bin/dpsmar...esF.html?E+Sig
Crazystick Cub Brotherhood # 115
http://www.sigmfg.com/cgi-bin/dpsmar...esF.html?E+Sig
Crazystick Cub Brotherhood # 115
01-15-2014, 07:24 AM
#1470
Looks like it has one more leaf than the one in the kit, but very good tail wheel setup. I use it on my 4*120 as well. Has anyone used the Robarts gear for the 1/5th cub?
I did some more work on mine last night, the left wing is mostly assembled, at the step where the wing is removed and the under side built. It came out extremely light, may have to rethink my power plant for this, the OS 70 may be too much power for it now.
I did some more work on mine last night, the left wing is mostly assembled, at the step where the wing is removed and the under side built. It came out extremely light, may have to rethink my power plant for this, the OS 70 may be too much power for it now.
01-15-2014, 12:15 PM
#1471
Hey guys, I'd like to be in on this too - got a GP Cub-40 that's been flying 12 years.
Dave
Dave
01-15-2014, 08:12 PM
#1472
Join Date: Nov 2005
Location: Yakima, WA
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
As I mentioned before here is a picture of my New Cub Logo that I designed for a few Builds. Gary over at Decal- it, did a fantastic job on these. From a concept idea to finished product it only took a few days and most of that was Time in the hands of the post office. Thanks again Gary.
Last edited by Bauer66; 01-15-2014 at 08:16 PM. Reason: error
01-16-2014, 08:34 PM
#1473
As I mentioned before here is a picture of my New Cub Logo that I designed for a few Builds. Gary over at Decal- it, did a fantastic job on these. From a concept idea to finished product it only took a few days and most of that was Time in the hands of the post office. Thanks again Gary.