***CUB BROTHERHOOD***
#3927
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
I can't believe you sold that Ace... that is probably one of the best looking clipped wing cubs I have seen apart from the traditional blue white (Hazel Sig) cub... you have to build another one Ace without a doubt, order the kit man! .
I have a spare J3 cub kit, just in case Sig gets stupid and stops producing them, lol
John M,
I have a spare J3 cub kit, just in case Sig gets stupid and stops producing them, lol
John M,
#3928
An L4 would be nice... but you should replace that clipped wing cub, those colors you choose really pop on that model
If I did another cub, it would definitely be 1/3 scale, and I would take it to full scale detail, tubed frame and all.
John M,
If I did another cub, it would definitely be 1/3 scale, and I would take it to full scale detail, tubed frame and all.
John M,
#3929
Stop it, you made me want to do a 1/3rd now. I have no more room! Besides, with a 114" P-61, 101" B-25 and a 168" Rascal sitting in boxes, I have more than enough wood to put together, just no time to do it. Getting close to completing my Biper though! Left wing is being setup, the bottom wing I fixed the aileron, and putting the final color coats on it, mount the servo in the upper wing and move on to the right wing. Then have to figure out its CG. From the looks of it, thinking the leading edge of the upper wing should be a good starting point. Pics as soon as I finish the left wing and mount it.
#3930
lol, well I have been temped on several occasions to get that Paolo Severin L4 kit, but since OS stopped producing the FT-300 Super Gemini, I don't know what 4 stroke I would put in it... none the less, I'm just going to hang on for a while and see where the financial situation goes over then next couple years; with all this political BS going on, who knows whats going to happen.
John M,
John M,
#3931
Saito FG 57. Its about a 300 size gas 4 stroke. It would be awesome in a Cub. I was going to fly my Cub today, got to the field and realized I left the small field box at home that has the bolts for the wings. DOH! I was forced to fly my LT-40, P-51 and Something extra instead. No biggy, it was the first time I got to fly the P-51 since I looped it into the ground 2 years ago. Solved the cause of what looped it, too much elevator. I worked on that at the field, had all the rest of my stuff and was able to swap out a servo in the wing that a mouse chewed on. I think there may still be some dog food flopping around in the wing too. Now that I have that one flying again, I am going to focus on getting my monster Extra 330 L in the air, need to redo the fuel lines, and check the balance, and a friend who flies these will help buddy box me on it until I get the feel for it. I am confident I can fly it fine, but its $5000! yeah my other planes have buck in them, but $5000!!!! Its also a composite so not very easy to repair.
Two more weeks and I think my Biper will be ready for its maiden flight. Almost done with one wing, the other will go quicker since I already have the servo tray done.
Two more weeks and I think my Biper will be ready for its maiden flight. Almost done with one wing, the other will go quicker since I already have the servo tray done.
#3932
Junior Member
My Feedback: (3)
Join Date: Dec 2007
Location: Sutter Creek,
CA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
OMG!! There is a place for us Cub guys! I have several Sig 1/4 scale Cubs. One is in my shop being repaired. One needs me to build a new Cowling. One needs to be final sanded before covering & Finishing.... Most have the OS 160 twin 4 strokes on them. Love that engine.... Good sound and good power, not to mention very easy to start and operate. How do I become a member of the Cub Brotherhood?? I definitely Qualify!
Thanks to all,
Weav
Fred Weaver
Sutter Creek, CA
Thanks to all,
Weav
Fred Weaver
Sutter Creek, CA
#3933
How do you have them setup? Onboard glow, or just tie the two plugs together to a remote jack? I have a Gemini 120ii that I just got, still attached to a plane, but not a Cub. Ultimate Bipe. Need a little work to be flyable, but the engine appears to be in great shape.
#3934
Junior Member
My Feedback: (3)
Join Date: Dec 2007
Location: Sutter Creek,
CA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Thanks,
Weav
#3936
Thread Starter
My Feedback: (50)
#1 Cub Man - Charles Brooks
#2 Minn Flyer - Mike B.
#3 acerc - Robert R
#4 Arup -
#5 Frequent Flyer -
#6 bikerbc -
#7 GAP RCU -
#8 rafeeki -
#9 Scirocco 14 - Mark
#10 Lins - Lindsey G
#11 CK1 – Chris
#12 Jaybird –
#13 heritageman -
#14 Live Wire - Larry K
#15 Saito18 –
#16 davidgeorge212 –
#17 WacoNut –Anthony
#18 raydar –
#19 no1isnormal –
#20 JH313 –
#21 JNorton – John
#22 FJRrider –
#23 lovetoflyguy – PJ
#24 Edwin – Edwin
#25 Lavell – Lavell
#26 crash bandicoute
#27 do335a –
#28 fred985
#29 Pa-18cub150 –
#30 cessna579 –
#31 cubcrasher –
#32 mac1va –
#33 morganflyboy –
#34 Steve Landron –
#35 mintie –
#36 Gordie M –
#37 extra-nut –
#38 snowball –
#39 eastkurt - Kurt
#40 JerryM –
#41 rcavi8or –
#42 meanrc –
#43 Rc Overkill –
#44 oldiron410 –
#45 Hill202 –
#46 weathervane – Andrew
#47 SunDevilPilot –
#48 iflyj3 – Dan
#49 gluemaster –
#50 EddieC –
#51 CanDo – Les
#52 dabigboy – Matt
#53 [email protected] –
#54 woodworm –
#55 skipb
#56 mrdhub – Dan
#57 Homer712
#58 scaleman57 –
#60 psheffield
#61 quiltsfly
#62 G.Barber
#63 bobbailey
#64 scflyboy
#65 Cub Flyer Fresno
#66 FILE IFR - Mike T
#67 talob – Mike
#68 Lowvoltage – Joe
#70 Glyder – Chuck
#71 smkrclfyer –
#72 jeffEE
#73 GW –
#74 lever02
#75 AB Bob – Bob
#76 rede2fly –
#77 Barn-E-Stormer
#78 Ray S. –Ray
#79 Daniel-EL
#80 ExcaliburIII – Richard Longfellow
#81 jrb1 -
#82 on_your_six –
#83 BGCombs
#84 RevGQ
#85 jkr_1100
#86 Dope Fiend
#87 paero-RCU
#88 .50cal
#89 mrshea - Phil
#90 Cougar-RCU
#91 glenladen
#92 cublover
#93 lowbubba
#94 steve
#95 Gray Beard
#96 roaddog2
#97 biam
#98 rcpilotaviator
#99 funtana1
#100 rcavi8or
#101 GPutt33
#102 actionjackson
#103 sj3cub
#104 dreamwever
#105 phatbob02
#106 igoren
#107 N1EDM
#108 mrwad – Don
#109 dirtrod – Ty
#110 HawkI
#111 redkav
#112 GerKonig _Gerry
#113 SCOTT42
#114 5blue
#115 crazystick
#116 3[SUP]rd [/SUP]time Richard
#117 chevyman962000
#118 Mrj3cub
#119 Oldflyer2
#120 rogergh
#121 TEAMERICA
#122 cannonball200
#123 TripleDeucer
#124 tenspeed59 – Mark
#125 rcjunky67 – Robert
#126 VincentJ
#127 nalby
#128 fcf
#129 malitape
#130 sirzepp
#131 rmpRmP
#132 Rv7garage
#133 pt19 flyer
#134 JohnFH
#135 ahgoodman
#136 skyraider71
#137 Planejaw
#138 rc airplane nut
#139 Stan7476
#140 RDJeff
#141 rmpRmP
#142 oldfartpilot
#143 Big Lacy
#144 mnemennth
#145 Unclebuck21228
#146 WacoOne
#147 AV8RJIM
#148 retcaptafd
#149 dadragon
#150 boss_rc
#151 [email protected]
#152 msu68stang
#153 cowboy1969
#154 cubflyman
#155 akcub
#156 oldfartpilot
#157 jwrich
#158 rmyret
#159 tom_sandiego
#160 5skyhawk172
#161 archie05
#162 JerryM
#163 elaguilacalva
#164 arfwrecker
#165 I_Fly
#166 althepal88
#167 ROCKY1405
#168 scale buff
#169 Grumpy Monkey
#170 pt19 flyer
#171 Cloud Cruiser
#172 rye
#173 Props4ever
#174 oldfartpilot
#175 rcfighterjock
#176 cubkadet
#177 wildbills21
#178 RCJones
#179 FlyerInOKC
#180 WB6JGD
#181 Joey B
#182 cwhitacre21
#183 Yank II
#184 RCJones
#185 facia
#186 Aiden88
#187 spaceworm
#188 Sgt. Meyer
#189 LarsL
#190 jmcowart
#191 308jockey
#192 yak86
#193 p510851
#194 Bauer66
#195 baldguy
#196 acdii
#197 Mr-Punk
#198 skylark-flier
#199 braddock VC
#200 ThunderBoat42
#201 Ultimateflying
#202 FlyerInOKC
#203 John_M_
#204 Mako17
#205 bpoates25
#206 3136
#207 Loopdeeloop
#208 Jim Hargett
#209 deanz406
#210 darren4
#211 Murphey
#212 Horsepoweraviation
#213 Chucks
#214 Bob Howard
#215 Firewalkerd1
#216 Antares100
#217 motor12
#218 hogflyer
#219 bigbird3
#220 PeterC
#221 bwoofter
#222 Bush Flyer
#223 kevinf2501
#224 Jim Hargett
#225 shiprex
#226 Super08
#227 randomvector
#228 jvance
#229 Fly North
#230 Corsair2013
#231 SrTelemaster150
#232 larscato
#233 TheComputerGeek
#234 iflyfloats
#235 cubcrafter60
#236 Leroy Gardner
#237 d boothe
#238 TonyBuilder
#239 ALLSCALE1
#240 stankinator
#241 thebighawg
#242 rickj
#243 Clavin01
#244 Eddym
#245 Quigleywins
#246 newbiedc
#247 Skinny Bob
#248 bobbailey
#249 newbiedc
#250 acdii
#251 mustangherb
#252 52larry52
#253 FlyWheel
#254 ArcadeAir
#255 pilotbum
#256 jimbrock2
#257 sckevan
#258 wistillwill
#259 panhandler
#260 BUDMAN27
#261 Billy J
#262 dj9124
#263 RagwingFan
#264 BrightGarden
#265 p3arljam
#266 MFIGHT43
#267 Weav
#2 Minn Flyer - Mike B.
#3 acerc - Robert R
#4 Arup -
#5 Frequent Flyer -
#6 bikerbc -
#7 GAP RCU -
#8 rafeeki -
#9 Scirocco 14 - Mark
#10 Lins - Lindsey G
#11 CK1 – Chris
#12 Jaybird –
#13 heritageman -
#14 Live Wire - Larry K
#15 Saito18 –
#16 davidgeorge212 –
#17 WacoNut –Anthony
#18 raydar –
#19 no1isnormal –
#20 JH313 –
#21 JNorton – John
#22 FJRrider –
#23 lovetoflyguy – PJ
#24 Edwin – Edwin
#25 Lavell – Lavell
#26 crash bandicoute
#27 do335a –
#28 fred985
#29 Pa-18cub150 –
#30 cessna579 –
#31 cubcrasher –
#32 mac1va –
#33 morganflyboy –
#34 Steve Landron –
#35 mintie –
#36 Gordie M –
#37 extra-nut –
#38 snowball –
#39 eastkurt - Kurt
#40 JerryM –
#41 rcavi8or –
#42 meanrc –
#43 Rc Overkill –
#44 oldiron410 –
#45 Hill202 –
#46 weathervane – Andrew
#47 SunDevilPilot –
#48 iflyj3 – Dan
#49 gluemaster –
#50 EddieC –
#51 CanDo – Les
#52 dabigboy – Matt
#53 [email protected] –
#54 woodworm –
#55 skipb
#56 mrdhub – Dan
#57 Homer712
#58 scaleman57 –
#60 psheffield
#61 quiltsfly
#62 G.Barber
#63 bobbailey
#64 scflyboy
#65 Cub Flyer Fresno
#66 FILE IFR - Mike T
#67 talob – Mike
#68 Lowvoltage – Joe
#70 Glyder – Chuck
#71 smkrclfyer –
#72 jeffEE
#73 GW –
#74 lever02
#75 AB Bob – Bob
#76 rede2fly –
#77 Barn-E-Stormer
#78 Ray S. –Ray
#79 Daniel-EL
#80 ExcaliburIII – Richard Longfellow
#81 jrb1 -
#82 on_your_six –
#83 BGCombs
#84 RevGQ
#85 jkr_1100
#86 Dope Fiend
#87 paero-RCU
#88 .50cal
#89 mrshea - Phil
#90 Cougar-RCU
#91 glenladen
#92 cublover
#93 lowbubba
#94 steve
#95 Gray Beard
#96 roaddog2
#97 biam
#98 rcpilotaviator
#99 funtana1
#100 rcavi8or
#101 GPutt33
#102 actionjackson
#103 sj3cub
#104 dreamwever
#105 phatbob02
#106 igoren
#107 N1EDM
#108 mrwad – Don
#109 dirtrod – Ty
#110 HawkI
#111 redkav
#112 GerKonig _Gerry
#113 SCOTT42
#114 5blue
#115 crazystick
#116 3[SUP]rd [/SUP]time Richard
#117 chevyman962000
#118 Mrj3cub
#119 Oldflyer2
#120 rogergh
#121 TEAMERICA
#122 cannonball200
#123 TripleDeucer
#124 tenspeed59 – Mark
#125 rcjunky67 – Robert
#126 VincentJ
#127 nalby
#128 fcf
#129 malitape
#130 sirzepp
#131 rmpRmP
#132 Rv7garage
#133 pt19 flyer
#134 JohnFH
#135 ahgoodman
#136 skyraider71
#137 Planejaw
#138 rc airplane nut
#139 Stan7476
#140 RDJeff
#141 rmpRmP
#142 oldfartpilot
#143 Big Lacy
#144 mnemennth
#145 Unclebuck21228
#146 WacoOne
#147 AV8RJIM
#148 retcaptafd
#149 dadragon
#150 boss_rc
#151 [email protected]
#152 msu68stang
#153 cowboy1969
#154 cubflyman
#155 akcub
#156 oldfartpilot
#157 jwrich
#158 rmyret
#159 tom_sandiego
#160 5skyhawk172
#161 archie05
#162 JerryM
#163 elaguilacalva
#164 arfwrecker
#165 I_Fly
#166 althepal88
#167 ROCKY1405
#168 scale buff
#169 Grumpy Monkey
#170 pt19 flyer
#171 Cloud Cruiser
#172 rye
#173 Props4ever
#174 oldfartpilot
#175 rcfighterjock
#176 cubkadet
#177 wildbills21
#178 RCJones
#179 FlyerInOKC
#180 WB6JGD
#181 Joey B
#182 cwhitacre21
#183 Yank II
#184 RCJones
#185 facia
#186 Aiden88
#187 spaceworm
#188 Sgt. Meyer
#189 LarsL
#190 jmcowart
#191 308jockey
#192 yak86
#193 p510851
#194 Bauer66
#195 baldguy
#196 acdii
#197 Mr-Punk
#198 skylark-flier
#199 braddock VC
#200 ThunderBoat42
#201 Ultimateflying
#202 FlyerInOKC
#203 John_M_
#204 Mako17
#205 bpoates25
#206 3136
#207 Loopdeeloop
#208 Jim Hargett
#209 deanz406
#210 darren4
#211 Murphey
#212 Horsepoweraviation
#213 Chucks
#214 Bob Howard
#215 Firewalkerd1
#216 Antares100
#217 motor12
#218 hogflyer
#219 bigbird3
#220 PeterC
#221 bwoofter
#222 Bush Flyer
#223 kevinf2501
#224 Jim Hargett
#225 shiprex
#226 Super08
#227 randomvector
#228 jvance
#229 Fly North
#230 Corsair2013
#231 SrTelemaster150
#232 larscato
#233 TheComputerGeek
#234 iflyfloats
#235 cubcrafter60
#236 Leroy Gardner
#237 d boothe
#238 TonyBuilder
#239 ALLSCALE1
#240 stankinator
#241 thebighawg
#242 rickj
#243 Clavin01
#244 Eddym
#245 Quigleywins
#246 newbiedc
#247 Skinny Bob
#248 bobbailey
#249 newbiedc
#250 acdii
#251 mustangherb
#252 52larry52
#253 FlyWheel
#254 ArcadeAir
#255 pilotbum
#256 jimbrock2
#257 sckevan
#258 wistillwill
#259 panhandler
#260 BUDMAN27
#261 Billy J
#262 dj9124
#263 RagwingFan
#264 BrightGarden
#265 p3arljam
#266 MFIGHT43
#267 Weav
#3938
Junior Member
My Feedback: (3)
Join Date: Dec 2007
Location: Sutter Creek,
CA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Yahoooooo! I made it!
Will also begin asking about the best floats to build for the Sig 1/4 Scale Cub. Both Clipped Wing and Standard Wing......
We're having fun now!
Weav
#3939
Junior Member
Join Date: May 2016
Location: Nottingham, England
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Hi everyone, just found the Brotherhood - Really neat idea.
Please count me in.
I have a set of the full sized L4 Cub pilot's handbooks (including how to fly a piper cub - LoL!), flight, operational and maintenance (servicing for us Brits) manuals. There are a total of 6 pdf documents covering all the variants. They were first printed between 1945 to 1948.They contain loads of accurate information, hard to get details, colour schemes, black/white pictures and scale drawings. A must for a scale fans.
I'll upload them if some of the 'Brotherhood' would like a copy or would just like to view them for the sake of interest.
Regards to all.
Hangar 9 1/4 Scale J3
Balsa USA 1/4 Scale, Converting to L4, Spektrum Radio, OS 160 Gemini, FEMA On-Board Start.
Please count me in.
I have a set of the full sized L4 Cub pilot's handbooks (including how to fly a piper cub - LoL!), flight, operational and maintenance (servicing for us Brits) manuals. There are a total of 6 pdf documents covering all the variants. They were first printed between 1945 to 1948.They contain loads of accurate information, hard to get details, colour schemes, black/white pictures and scale drawings. A must for a scale fans.
I'll upload them if some of the 'Brotherhood' would like a copy or would just like to view them for the sake of interest.
Regards to all.
Hangar 9 1/4 Scale J3
Balsa USA 1/4 Scale, Converting to L4, Spektrum Radio, OS 160 Gemini, FEMA On-Board Start.
#3942
Junior Member
Join Date: May 2016
Location: Nottingham, England
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Do I need to ask the moderator or anything before uploading?
Document sizes=
8,174kb
11,549kb
54,225kb
17,324kb
45,549kb
7,316kb
I need to check up on the rules for uploading files first.
Regards
Document sizes=
8,174kb
11,549kb
54,225kb
17,324kb
45,549kb
7,316kb
I need to check up on the rules for uploading files first.
Regards
#3943
If you cannot post them here, you can put them in a Google Drive folder, Dropbox or similar online file sharing and post the link here for people to access it. If you're unsure how to do this I can help.
#3945
Junior Member
Join Date: May 2016
Location: Nottingham, England
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info, I'm just checking out a few of the online storage sights to upload them. I also have an A3 copy of what, (IMO), is the best set of J3/L4 Scale 3 view drawings (rarer than hens teeth). They were originally published in the English Plans Handbook Scale 3 view drawings catalogue.
Not having used on line storage before, if I upload the documents, can the forum members either print or download the docs for themselves? which is what I would like them to be able to do.
RCM
#3946
My Feedback: (6)
Thanks for the info, I'm just checking out a few of the online storage sights to upload them. I also have an A3 copy of what, (IMO), is the best set of J3/L4 Scale 3 view drawings (rarer than hens teeth). They were originally published in the English Plans Handbook Scale 3 view drawings catalogue.
Not having used on line storage before, if I upload the documents, can the forum members either print or download the docs for themselves? which is what I would like them to be able to do.
RCM
Not having used on line storage before, if I upload the documents, can the forum members either print or download the docs for themselves? which is what I would like them to be able to do.
RCM
#3948
Thanks for the info, I'm just checking out a few of the online storage sights to upload them. I also have an A3 copy of what, (IMO), is the best set of J3/L4 Scale 3 view drawings (rarer than hens teeth). They were originally published in the English Plans Handbook Scale 3 view drawings catalogue.
Not having used on line storage before, if I upload the documents, can the forum members either print or download the docs for themselves? which is what I would like them to be able to do.
RCM
Not having used on line storage before, if I upload the documents, can the forum members either print or download the docs for themselves? which is what I would like them to be able to do.
RCM