~~Sig Kadet Brotherhood~~.
#3551
LOL Thats why my tablesaw is still in the garage, I know I can get it down there, but getting it back out? Cast iron goes down a lot easier than it does coming back up!
#3554
Thanks, I have been building and flying rc planes for some 40 years and always wanted to build this one... and I finally did!
I was very happy to discover that I can still enjoy building and flying such a basic 3 channel model so much
Built it for fun and for running in engines in flight (has a universal engine mount for that purpose).
#3556
Thanks, I have been building and flying rc planes for some 40 years and always wanted to build this one... and I finally did!
I was very happy to discover that I can still enjoy building and flying such a basic 3 channel model so much
Built it for fun and for running in engines in flight (has a universal engine mount for that purpose).
a basic 3 channel plane is just what the doctor ordered.
Besides it’s fun to show off for the kids errr..fellow new flyers you don’t need all those extra switch’s and channels
#3559
How are the kids errr.. fellow new flyers going to see that nice plane when they can't look past their smart phones to see what's going on around them? It will probably take a twin turbine flying by at full throttle and at less than 4 feet(roughly just over a meter) just to get their attention now days, at least here in the US
#3561
Beautiful Kadet Sr!!!! GREAT color combination!!
#3562
My Feedback: (6)
I'm finishing up my Senior and an LT-40(my third) for floats. The Senior is a tail drager, bolt on wing, with LG and cowl from the ARF version with mods to cowl for turbo prop appearance. It also has ailerons. Powered by a Cobra 4120 series on 5S pack. I also bought a set of 1/4 scale Cub tires(Dubro) for an additional bush plane appearance.
The LT -40 is also tail dragger, bolt on wing and set up for floats. Bought the cowl for the ARF version, lengthened the rudder, split the elevator to allow for the rudder and tail wheel. Using dual servos for the ailerons. Floats are from Sea Plane supply. Powered by a Hyperion 3025 outrunner.
The floats are in progress as I need to glass them. Will be mounting a servo in the left float for the rudder.
Sorry no pics as my old digital camera went south on me and I haven't bought a new one....been looking at the Nikon B 500 Cool Pic.
Maybe I can get my brother to take a few snaps with his cell phone.
I don't own a cell phone.
The LT -40 is also tail dragger, bolt on wing and set up for floats. Bought the cowl for the ARF version, lengthened the rudder, split the elevator to allow for the rudder and tail wheel. Using dual servos for the ailerons. Floats are from Sea Plane supply. Powered by a Hyperion 3025 outrunner.
The floats are in progress as I need to glass them. Will be mounting a servo in the left float for the rudder.
Sorry no pics as my old digital camera went south on me and I haven't bought a new one....been looking at the Nikon B 500 Cool Pic.
Maybe I can get my brother to take a few snaps with his cell phone.
I don't own a cell phone.
#3563
I have found the rudder on the LT-40 to be big enough, I can barrel roll mine with just the rudder. Making it larger may help with hammer heads though if I were to get some nose weight off. Mine is also a tail dragger. I may put wider ailerons on mine though, the skinny stock ones aren't as effective at low speeds as I would like.
#3564
SIG Kadet LT-40 on 6" Rubbers
Greetings! Looks like this thread needs some fresh content! Can the maintainer of this thread please add me to the brotherhood?
Since the weather was absolutely beautiful yesterday here in Central Iowa, I was able to get out for the first flight of 2020! I have had my Kadet since the early 2000s, and just am getting back into the hobby now that I'm "grown up" and have access to my own personal flying field at home. Until this year it had not been flown since ~2004! Still running 72mhz and original batteries
I love my Kadet, and this past fall I converted it to a taildragger and added 6" DuBro pneumatic tires to handle the relatively rough ground. It makes taxiing, takeoff, and landing so easy! Looking forward to a great flying season with this bird.
Since the weather was absolutely beautiful yesterday here in Central Iowa, I was able to get out for the first flight of 2020! I have had my Kadet since the early 2000s, and just am getting back into the hobby now that I'm "grown up" and have access to my own personal flying field at home. Until this year it had not been flown since ~2004! Still running 72mhz and original batteries
I love my Kadet, and this past fall I converted it to a taildragger and added 6" DuBro pneumatic tires to handle the relatively rough ground. It makes taxiing, takeoff, and landing so easy! Looking forward to a great flying season with this bird.
#3566
Now go build another wing with 1" Dihedral! Mine is a blast to fly, built as a tail dragger, 1" dihedral, bolt on wing, does ribbon loops, flies inverted, knife edge, you know, things a trainer normally can't do.
The following users liked this post:
rcFLYBOY14 (02-24-2020)
#3567
They're right - those 6" tires are GREAT and you need to build another wing - much flatter. 1" sounds about right. Sure worked well on my Mk-II.
Gotcha logged - #220. WELCOME to the B'hood!!!!!!!!!!!!!!
Been awhile - here's (hoping) the brotherhood, as I've got it today.
Gotcha logged - #220. WELCOME to the B'hood!!!!!!!!!!!!!!
Been awhile - here's (hoping) the brotherhood, as I've got it today.
1 - GaryHarris
2 - soarrich
3 - N1EDM
4 - Live Wire
5 - 5skyhawk172
6 - zippome
7 - shepard62
8 - DeferredDefect
9 - archie05
10 - tomgreen
11 - n2ryd
12 - race61
13 - Slavko
14 - lkruse
15 - flyingagin
16 - JPNYGAARD
17 - foodstick
18 - ovationdave
19 - joebahl
20 - WI53072
21 - huck1199
22 - Top_Gunn
23 - Nergall
24 - acdii
25 - hutchis
26 - ddewey
27 - dhal22
28 - Thomas Pham
29 - cubkadet
30 - Greg Davis
31 - CanDo
32 - gva1956
33 - metaldriver
34 - Bladejunkie
35 - New222
36 - cubflyman
37 - dasquirrelisme
38 - Planejaw
39 - usc1990
40 - cjet
41 - Murphey
42 - Sandyt
43 - planedriver_2
44 - PT19
45 - TimHendrix
46 - jessiej
47 - Mr-Punk
48 - rccrasher65
49 - FMAY
50 - Hrannar
51 - Razor44
52 - Ken Kehlet
53 - oldfartpilot
54 - Soaring Steve
55 - freefall2907
56 - fix-n-fly
57 - SigMan
58 - eroc144
59 - nextofkin
60 - ALT
61 - jstyle13
62 - WYDAH
63 - stupidscreenname
64 - coxco
65 - TunnelBill
66 - mike109
67 - beevo
68 - Lowvoltage
69 - skylark-flier
70 - hugh durden
71 - Cloud Cruiser
72 - SIGPlanes
- 73 - rexperk
74 - M. Boesen
75 - whatwheel
76 - Wagon1
77 - paulhold
78 - groundstrike
79 - adreliable661
80 - earlwb
81 - Unclebuck21228
82 - malitape
83 - Dave Holmes
84 - Carlos G
85 - kingranch
86 - Red Kadet
87 - dirtrod
88 - t4
89 - FlyerInOKC
90 - DELTAFLY
91 - sharpe917
92 - jollyroger
93 - Cliffc
94 - 1320fastback
95 - captinjohn
96 - spaceworm
97 - EvanB
98 - Major Tomski
99 - Jim Branaum
100 - WLM189
101 - skyraider71
102 - rc lifer
103 - NM2K
104 - terrysigcolt
105 - plane-o-joe
106 - BobFE
107 - FLAPSDOWN
108 - scttsprg
109 - sbrillha
110 - Mike Gretz
111 - skyrat71
112 - lumppi
113 - bchapman
114 - scoooper
115 - JollyPopper
116 - CNY_Dave
117 - rtn9105
118 - mbnt
119 - crawler tech
120 - 308jockey
121 - bparker3
122 - DBD1
123 - Chappy110
124 - ercobud
125 - rickpell
126 - ThunderBoat42
127 - tazzzz
128 - ThunderChicken72
129 - deanz406
130 - biam
131 - UPF-7
132 - neons
133 - Flyboy14901
134 - proszak59
135 - wildbills21
136 - hairy46
137 - p-Yock
138 - rrengineer
139 - hogflyer
140 - Firewalkerd1
141 - Flight Risk
142 - ratshooter
143 - Steve Westphal
144 - cforcht
- 145 - kb8ife
146 - rburke39
147 - rc56
148 - redjack
149 - rdgettler
150 - daddyvinny
151 - MartyPetriSr
152 - tomclark
153 - c-crunch
154 - BigTeeEldorado
155 - TomCrump
156 - hiflyer15
157 - Fly North
158 - dwaynenancy
159 - oinoyou
160 - Jersy Hank
161 - flashpilot
162 - Old_RC_Guy
163 - TheComputerGeek
164 - FloridaBeachFlyr
165 - aggieman
166 - Renegade
167 - T-47
168 - SigSenior
170 - WMB
171 - ckimmey
172 - paul7194
173 - bebopgolf
174 - Big Stikflyer
175 - nealmontgomery
176 - Battle Short
177 - canadian8apilot
178 - Mud Duck
179 - EDDIEMAC
180 - merto31
181 - bisszerk
182 - Pork Chop
183 - bushman8377
184 - cmy6
185 - ETpilot
186 - michaelnel
187 - mortyspals
188 - PiperRon
189 - BrightGarden
190 - schwalbe
191 - Brayden
191 - GIVdriver
192 - wood489
193 - KenChoo
194 - aliraminghe
195 - shadowridertcw
196 - Hydro Junkie
197 - SPACE COWBOY
198 - Bumpie
199 - jsparky
200 - br549-2
201 - PatrickCurry
202 - Dwayne
203 - Leroy Gardner
204 - FazFly
205 - Shere-Khan
206 - Jeff Spicoli
207 - bodybuildr
208 - Sport_Pilot
209 - arnieby
210 - richard dee
211 - pens100
212 - Dave Swanson
213 - robflyer82
214 - leitefrog
215 - fennel
216 - eeyess
217 - jayyak
218 - Mwt5086
219 - funfly8
220 - rcFLYBOY14
#3568
(OMG, I did it right)
((yeaaaaaaaaaa!!!!!))
((yeaaaaaaaaaa!!!!!))
The following users liked this post:
skylark-flier (02-25-2020)
#3570
New brother!
Boy, now you guys have got me thinking, maybe I do need to build another wing. Can I buy just a wing kit from SIG??
The idea is more and more attractive to me. Here's what I would do in the process:
- reduce dihedral down to 1"
- Incorporate split barn door flaps and ailerons
- Wing tip NAV lights
- L.E. landing lights
- Others??
#3572
Number 220!! I love it! Thanks so much for the add and good work on the update.
Boy, now you guys have got me thinking, maybe I do need to build another wing. Can I buy just a wing kit from SIG??
The idea is more and more attractive to me. Here's what I would do in the process:
Boy, now you guys have got me thinking, maybe I do need to build another wing. Can I buy just a wing kit from SIG??
The idea is more and more attractive to me. Here's what I would do in the process:
- reduce dihedral down to 1"
- Incorporate split barn door flaps and ailerons
- Wing tip NAV lights
- L.E. landing lights
- Others??
It's on https://sigmfg.com/collections/sig-r...nt=45835297673
Part # SIGRPBK267 Kadet LT40 wing-kit (includes torque rod). $59.99
One note though - I'd be VERY likely to build it with servos on each wing. MUCH more "commanding" that way.
There are sooooooo many possibilities with the LT40. Adding flaps to the inner third and just using the outer third for ailerons ... flaperons ... the possibilities are endless.
The following users liked this post:
rcFLYBOY14 (02-25-2020)
#3573
If you were REALLY going wild, flaps & slats.
((oh boy, don't get me started - I'll cost you a fortune))
((oh boy, don't get me started - I'll cost you a fortune))
The following users liked this post:
rcFLYBOY14 (02-25-2020)
#3574
Since I have a laser, I can make my own parts for a second wing. May reduce it to a 1/2" dihedral and put some curve to the bottom of the airfoil starting 1 rib out from the root. Imagine the lift it would have! Could fly it backwards with a 5 MPH breeze. Would need flaps for sure in order to land.
#3575
Since you have the plans, why not make your own wing kit? It doesn't take a lot of work, just a band/scroll saw and a sander.
I'm doing that on a pair of Kadet Jrs that I'm building and adding ailerons that are 25% of the wing chord and three bays wide with servos in the center bay. I figure I will have a plane that is VERY RESPONSIVE that way
I'm doing that on a pair of Kadet Jrs that I'm building and adding ailerons that are 25% of the wing chord and three bays wide with servos in the center bay. I figure I will have a plane that is VERY RESPONSIVE that way
Last edited by Hydro Junkie; 02-25-2020 at 07:57 AM.
The following users liked this post:
skylark-flier (02-25-2020)