~~Sig Kadet Brotherhood~~.
#2726
Michael good show on the flying. It is a good feeling when you get to do it on your own. Building also has its rewards. Your build and the covering looks very good. There is a learning curve to using Koverall. My LT-40 is the second time using it. I started covering the fuselage and found I was short on Koverall. I had to be a bit judicious applying what I had. I used dress liner on the bottom but the dress liner-Koverall seam looks terrible. But it's on the bottom so it will not be easily seen.
I'm going with latex so it will be interesting to see how it turns out. I'll be spraying too.
I'm going with latex so it will be interesting to see how it turns out. I'll be spraying too.
#2727
Your covering on the fuse looks great to me!
I just finished covering the vertical stabilizer. Each one comes out better than the last. Next is all the control surfaces... do you guys use one piece and wrap it around, or cover each side of the rudder, elevator, and ailerons seperately?
I think the fuselage will be the easiest for me. Pretty much all flat sides, and mine is a current SIG kit so the fuselage is mostly light ply, not sticks.
I just finished covering the vertical stabilizer. Each one comes out better than the last. Next is all the control surfaces... do you guys use one piece and wrap it around, or cover each side of the rudder, elevator, and ailerons seperately?
I think the fuselage will be the easiest for me. Pretty much all flat sides, and mine is a current SIG kit so the fuselage is mostly light ply, not sticks.
Last edited by michaelnel; 06-27-2015 at 03:37 PM.
#2728
My Feedback: (98)
Join Date: Feb 2002
Location: The Villages, Florida NJ
Posts: 4,677
Likes: 0
Received 0 Likes
on
0 Posts
=michaelnel;12062104 I think the finished product will be nice, but man, what a labor-intensive and expensive process to use this stuff.
#2729
There are much less expensive alternatives to Polycrylic for finishing Koveral or dress liner or Solartex or non spec glider polyester. Search for covering with fabric here on RCU for many threads (polyester threads heh-heh) I have finished polyester dress lining with hardware store water base acrylic to good effect.
Sincerely, Richard
Sincerely, Richard
Ken
#2730
I sure know what you mean about covering being expensive today. I enjoyed every minute of covering my latest with koverall but the cost - not so much. Covering actually cost me more than building it. HOWEVER, once done it looks like a million dollars - and you gotta know that it'll be unique.
I gotta tell you, that wing and stab looks great too.
Press on my friend, press on.
I gotta tell you, that wing and stab looks great too.
Press on my friend, press on.
#2731
Thank you.
Today I will get the rest of the covering done. Control surfaces and fuselage, then I will start the PolyCrylic coats, 3 total. This thing will fly someday. Sure glad I bought the ARF so I am able to fly that while this slow process goes on.
re: The ARF. The covering on that thing won't stay tight. I have tightened it three times now using an iron and following the method in the manual. When I finish, it's tight as a drum.
I take it out to the flying field and after it sits in the sun in the pits for a while, all the black stuff loosens back up and looks like hell. Wrinkles all over. We live in an area where the humidity is super low, but the temperature is often over 100 degrees in the shade. The SIG Oracover or whatever they call it does not do well in the heat.
Today I will get the rest of the covering done. Control surfaces and fuselage, then I will start the PolyCrylic coats, 3 total. This thing will fly someday. Sure glad I bought the ARF so I am able to fly that while this slow process goes on.
re: The ARF. The covering on that thing won't stay tight. I have tightened it three times now using an iron and following the method in the manual. When I finish, it's tight as a drum.
I take it out to the flying field and after it sits in the sun in the pits for a while, all the black stuff loosens back up and looks like hell. Wrinkles all over. We live in an area where the humidity is super low, but the temperature is often over 100 degrees in the shade. The SIG Oracover or whatever they call it does not do well in the heat.
#2732
I hate plastic covering. It goes on easy, can look OK, but does not hold up to hanger rash well, where the Koverall and Dope can take a beating. Any spot that got rubbed wrong are easily touched up with dope. My Cub looks great, and my Biper is coming out very nice. Only thing I found is the red tends to come off on the towel when cleaning up. It also came out really light compared to the Chipmunk I covered in dress liner and rustoleum. I think that one, since I have to do some covering repairs, I may strip it and ultracote it.
#2733
Maybe the problem with the ARF's covering is that the wood is still full of moisture from Vietnam. It is super low humidity here (like 15%) and the black covering absorbs more heat than the white. The moisture gets baked out of the wood in the hot dry air, the black sags and loosens up (the white stays tight). Maybe eventually the thing will acclimate itself to this dry climate and stop shrinking.
#2734
I hate plastic covering. It goes on easy, can look OK, but does not hold up to hanger rash well, where the Koverall and Dope can take a beating. Any spot that got rubbed wrong are easily touched up with dope. My Cub looks great, and my Biper is coming out very nice. Only thing I found is the red tends to come off on the towel when cleaning up. It also came out really light compared to the Chipmunk I covered in dress liner and rustoleum. I think that one, since I have to do some covering repairs, I may strip it and ultracote it.
Sincerely, Richard
#2735
Which type of final coat of red is coming off on the towel with cleaning up? Are you using something like Windex to clean up with? Glow fuel or gasoline or a mix? Does "light compared to the Chipmunk" refer to color or weight? If you hate plastic, why are you going to use ultracote? These are genuine questions I am curious about, not flippant remarks. Thanks for your comments.
Sincerely, Richard
Sincerely, Richard
#2737
Rustoleum does not produce a heavy finish. If it did, few of my models would fly.
Rustoleum's high hiding properties allow lighter coats to be applied, and still maintain good coverage. I've painted several airframes with it, and I'm completely satisfied.
Rustoleum's high hiding properties allow lighter coats to be applied, and still maintain good coverage. I've painted several airframes with it, and I'm completely satisfied.
#2738
My Feedback: (2)
I'm just joining this discussion... How does Rustoleum stand up to 15% Nitro??? I have to paint some fiberglass pieces with it. How about primer for use over fiberglass???
Are there different formulations of Rustoleum that I should use, or is it just plain old Rustoleum from the Home Center?
Thanks,
Bob
Are there different formulations of Rustoleum that I should use, or is it just plain old Rustoleum from the Home Center?
Thanks,
Bob
#2739
I use the Home Center variety of Rustoleum, purchased in quart cans.
Will it hold up to 15% fuel ? Probably, if you wipe it down, immediately after contact.
I use automotive primers, over fiberglass. If an aerosol is desired, Duplicolor high build is my choice.
Will it hold up to 15% fuel ? Probably, if you wipe it down, immediately after contact.
I use automotive primers, over fiberglass. If an aerosol is desired, Duplicolor high build is my choice.
#2742
The spray cans of rustoleum do not hold up to any nitro, but the can stuff does. The thinners used in the spray must change the properties a bit as nitro will wrinkle it up. I think mine came out too heavy since I used white and it took a couple coats to come out even, where the colors only needed one. I may not have thinned it enough either, all I know is my chippy came out a pound heavier than it should have and that was after covering it. My SIG Cub with Koverall and dope is very light. In fact I hovered it briefly the other day, and with some practice and maintain a hover.
#2743
#2744
I got around to making my tail wheel assembly. A couple of bad practice turns in the 3/32" music wire. Figured out what it needed. Then I made the tail wheel assembly. Second picture is rough install. Last picture, picture not too good, is final install with pivot tube CA'ed in place. I will add epoxy later. Wheel is under pivot tube and turns super easy. It should work good. I will cut wire stock when vertical fin is in place and I can check it against rudder.
Next week I will do the final painting. Nothing fancy. Just good colors for weak eyes.
Next week I will do the final painting. Nothing fancy. Just good colors for weak eyes.
#2745
Well, looking at the picture it dawned on me that I did not allow for the horizontal stabilizer. Now I remember why I cut the pivot tube a bit longer. Easy fix. Cut a longer tube and replace. Good that I caught the error now.
#2748
And here's the SIG Kadet Brotherhood, as I've got it today:
[TABLE="width: 507"]
[TR]
[TD]1[/TD]
[TD]-[/TD]
[TD]Gary Harris[/TD]
[TD]66[/TD]
[TD]-[/TD]
[TD]mike109[/TD]
[TD]131[/TD]
[TD]-[/TD]
[TD]UPF-7[/TD]
[/TR]
[TR]
[TD]2[/TD]
[TD]-[/TD]
[TD]soarrich[/TD]
[TD]67[/TD]
[TD]-[/TD]
[TD]beevo[/TD]
[TD]132[/TD]
[TD]-[/TD]
[TD]neons[/TD]
[/TR]
[TR]
[TD]3[/TD]
[TD]-[/TD]
[TD]N1EDM[/TD]
[TD]68[/TD]
[TD]-[/TD]
[TD]Lowvoltage[/TD]
[TD]133[/TD]
[TD]-[/TD]
[TD]Flyboy14901[/TD]
[/TR]
[TR]
[TD]4[/TD]
[TD]-[/TD]
[TD]Live Wire[/TD]
[TD]69[/TD]
[TD]-[/TD]
[TD]skylark-flier[/TD]
[TD]134[/TD]
[TD]-[/TD]
[TD]proszak59[/TD]
[/TR]
[TR]
[TD]5[/TD]
[TD]-[/TD]
[TD]5skyhawk172[/TD]
[TD]70[/TD]
[TD]-[/TD]
[TD]hugh durden[/TD]
[TD]135[/TD]
[TD]-[/TD]
[TD]wildbills21[/TD]
[/TR]
[TR]
[TD]6[/TD]
[TD]-[/TD]
[TD]zippome[/TD]
[TD]71[/TD]
[TD]-[/TD]
[TD]Cloud Cruiser[/TD]
[TD]136[/TD]
[TD]-[/TD]
[TD]hairy46[/TD]
[/TR]
[TR]
[TD]7[/TD]
[TD]-[/TD]
[TD]shepard62[/TD]
[TD]72[/TD]
[TD]-[/TD]
[TD]SIGPlanes[/TD]
[TD]137[/TD]
[TD]-[/TD]
[TD]p-Yock[/TD]
[/TR]
[TR]
[TD]8[/TD]
[TD]-[/TD]
[TD]DeferredDefect[/TD]
[TD]73[/TD]
[TD]-[/TD]
[TD]rexperk[/TD]
[TD]138[/TD]
[TD]-[/TD]
[TD]rrengineer[/TD]
[/TR]
[TR]
[TD]9[/TD]
[TD]-[/TD]
[TD]archie05[/TD]
[TD]74[/TD]
[TD]-[/TD]
[TD]M. Boesen[/TD]
[TD]139[/TD]
[TD]-[/TD]
[TD]hogflyer[/TD]
[/TR]
[TR]
[TD]10[/TD]
[TD]-[/TD]
[TD]tomgreen[/TD]
[TD]75[/TD]
[TD]-[/TD]
[TD]whatwheel[/TD]
[TD]140[/TD]
[TD]-[/TD]
[TD]Firewalkerd1[/TD]
[/TR]
[TR]
[TD]11[/TD]
[TD]-[/TD]
[TD]n2ryd[/TD]
[TD]76[/TD]
[TD]-[/TD]
[TD]Wagon1[/TD]
[TD]141[/TD]
[TD]-[/TD]
[TD]Flight Risk[/TD]
[/TR]
[TR]
[TD]12[/TD]
[TD]-[/TD]
[TD]race61[/TD]
[TD]77[/TD]
[TD]-[/TD]
[TD]paulhold[/TD]
[TD]142[/TD]
[TD]-[/TD]
[TD]ratshooter[/TD]
[/TR]
[TR]
[TD]13[/TD]
[TD]-[/TD]
[TD]Slavko[/TD]
[TD]78[/TD]
[TD]-[/TD]
[TD]groundstrike[/TD]
[TD]143[/TD]
[TD]-[/TD]
[TD]Steve Westphal[/TD]
[/TR]
[TR]
[TD]14[/TD]
[TD]-[/TD]
[TD]lkruse[/TD]
[TD]79[/TD]
[TD]-[/TD]
[TD]adreliable661[/TD]
[TD]144[/TD]
[TD]-[/TD]
[TD]cforcht[/TD]
[/TR]
[TR]
[TD]15[/TD]
[TD]-[/TD]
[TD]flyingagin[/TD]
[TD]80[/TD]
[TD]-[/TD]
[TD]earlwb[/TD]
[TD]145[/TD]
[TD]-[/TD]
[TD]kb8ife[/TD]
[/TR]
[TR]
[TD]16[/TD]
[TD]-[/TD]
[TD]JPNYGAARD[/TD]
[TD]81[/TD]
[TD]-[/TD]
[TD]Unclebuck21228[/TD]
[TD]146[/TD]
[TD]-[/TD]
[TD]rburke39[/TD]
[/TR]
[TR]
[TD]17[/TD]
[TD]-[/TD]
[TD]foodstick[/TD]
[TD]82[/TD]
[TD]-[/TD]
[TD]malitape[/TD]
[TD]147[/TD]
[TD]-[/TD]
[TD]rc56[/TD]
[/TR]
[TR]
[TD]18[/TD]
[TD]-[/TD]
[TD]ovationdave[/TD]
[TD]83[/TD]
[TD]-[/TD]
[TD]Dave Holmes[/TD]
[TD]148[/TD]
[TD]-[/TD]
[TD]redjack[/TD]
[/TR]
[TR]
[TD]19[/TD]
[TD]-[/TD]
[TD]joebahl[/TD]
[TD]84[/TD]
[TD]-[/TD]
[TD]Carlos G[/TD]
[TD]149[/TD]
[TD]-[/TD]
[TD]rdgettler[/TD]
[/TR]
[TR]
[TD]20[/TD]
[TD]-[/TD]
[TD]WI53072[/TD]
[TD]85[/TD]
[TD]-[/TD]
[TD]kingranch[/TD]
[TD]150[/TD]
[TD]-[/TD]
[TD]daddyvinny[/TD]
[/TR]
[TR]
[TD]21[/TD]
[TD]-[/TD]
[TD]huck1199[/TD]
[TD]86[/TD]
[TD]-[/TD]
[TD]Red Kadet[/TD]
[TD]151[/TD]
[TD]-[/TD]
[TD]MartyPetriSr[/TD]
[/TR]
[TR]
[TD]22[/TD]
[TD]-[/TD]
[TD]Top_Gunn[/TD]
[TD]87[/TD]
[TD]-[/TD]
[TD]dirtrod[/TD]
[TD]152[/TD]
[TD]-[/TD]
[TD]tomclark[/TD]
[/TR]
[TR]
[TD]23[/TD]
[TD]-[/TD]
[TD]Nergall[/TD]
[TD]88[/TD]
[TD]-[/TD]
[TD]t4[/TD]
[TD]153[/TD]
[TD]-[/TD]
[TD]c-crunch[/TD]
[/TR]
[TR]
[TD]24[/TD]
[TD]-[/TD]
[TD]acdii[/TD]
[TD]89[/TD]
[TD]-[/TD]
[TD]FlyerInOKC[/TD]
[TD]154[/TD]
[TD]-[/TD]
[TD]BigTeeEldorado[/TD]
[/TR]
[TR]
[TD]25[/TD]
[TD]-[/TD]
[TD]hutchis[/TD]
[TD]90[/TD]
[TD]-[/TD]
[TD]DELTAFLY[/TD]
[TD]155[/TD]
[TD]-[/TD]
[TD]TomCrump[/TD]
[/TR]
[TR]
[TD]26[/TD]
[TD]-[/TD]
[TD]ddewey[/TD]
[TD]91[/TD]
[TD]-[/TD]
[TD]sharpe917[/TD]
[TD]156[/TD]
[TD]-[/TD]
[TD]hiflyer15[/TD]
[/TR]
[TR]
[TD]27[/TD]
[TD]-[/TD]
[TD]dhal22[/TD]
[TD]92[/TD]
[TD]-[/TD]
[TD]jollyroger[/TD]
[TD]157[/TD]
[TD]-[/TD]
[TD]Fly North[/TD]
[/TR]
[TR]
[TD]28[/TD]
[TD]-[/TD]
[TD]Thomas Pham[/TD]
[TD]93[/TD]
[TD]-[/TD]
[TD]Cliffc[/TD]
[TD]158[/TD]
[TD]-[/TD]
[TD]dwaynenancy[/TD]
[/TR]
[TR]
[TD]29[/TD]
[TD]-[/TD]
[TD]cubkadet[/TD]
[TD]94[/TD]
[TD]-[/TD]
[TD]1320fastback[/TD]
[TD]159[/TD]
[TD]-[/TD]
[TD]oinoyou[/TD]
[/TR]
[TR]
[TD]30[/TD]
[TD]-[/TD]
[TD]Greg Davis[/TD]
[TD]95[/TD]
[TD]-[/TD]
[TD]Captinjohn[/TD]
[TD]160[/TD]
[TD]-[/TD]
[TD]Jersy Hank[/TD]
[/TR]
[TR]
[TD]31[/TD]
[TD]-[/TD]
[TD]CanDo[/TD]
[TD]96[/TD]
[TD]-[/TD]
[TD]spaceworm[/TD]
[TD]161[/TD]
[TD]-[/TD]
[TD]flashpilot[/TD]
[/TR]
[TR]
[TD]32[/TD]
[TD]-[/TD]
[TD]gva1956[/TD]
[TD]97[/TD]
[TD]-[/TD]
[TD]EvanB[/TD]
[TD]162[/TD]
[TD]-[/TD]
[TD]Old_RC_Guy[/TD]
[/TR]
[TR]
[TD]33[/TD]
[TD]-[/TD]
[TD]metaldriver_2[/TD]
[TD]98[/TD]
[TD]-[/TD]
[TD]Major Tomski[/TD]
[TD]163[/TD]
[TD]-[/TD]
[TD]TheComputerGeek[/TD]
[/TR]
[TR]
[TD]34[/TD]
[TD]-[/TD]
[TD]Bladejunkie[/TD]
[TD]99[/TD]
[TD]-[/TD]
[TD]Jim Branaum[/TD]
[TD]164[/TD]
[TD]-[/TD]
[TD]FloridaBeachFlyr[/TD]
[/TR]
[TR]
[TD]35[/TD]
[TD]-[/TD]
[TD]New222[/TD]
[TD]100[/TD]
[TD]-[/TD]
[TD]WLM189[/TD]
[TD]165[/TD]
[TD]-[/TD]
[TD]aggieman[/TD]
[/TR]
[TR]
[TD]36[/TD]
[TD]-[/TD]
[TD]cubflyman[/TD]
[TD]101[/TD]
[TD]-[/TD]
[TD]skyraider71[/TD]
[TD]166[/TD]
[TD]-[/TD]
[TD]Renegade[/TD]
[/TR]
[TR]
[TD]37[/TD]
[TD]-[/TD]
[TD]dasquirrelisme[/TD]
[TD]102[/TD]
[TD]-[/TD]
[TD]rc lifer[/TD]
[TD]167[/TD]
[TD]-[/TD]
[TD]T-47[/TD]
[/TR]
[TR]
[TD]38[/TD]
[TD]-[/TD]
[TD]Planejaw[/TD]
[TD]103[/TD]
[TD]-[/TD]
[TD]NM2K[/TD]
[TD]168[/TD]
[TD]-[/TD]
[TD]SigSenior[/TD]
[/TR]
[TR]
[TD]39[/TD]
[TD]-[/TD]
[TD]usc1990[/TD]
[TD]104[/TD]
[TD]-[/TD]
[TD]terrysigcolt[/TD]
[TD]169[/TD]
[TD]-[/TD]
[TD]-[/TD]
[/TR]
[TR]
[TD]40[/TD]
[TD]-[/TD]
[TD]cjet[/TD]
[TD]105[/TD]
[TD]-[/TD]
[TD]plane-o-joe[/TD]
[TD]170[/TD]
[TD]-[/TD]
[TD]WMB[/TD]
[/TR]
[TR]
[TD]41[/TD]
[TD]-[/TD]
[TD]Murphey[/TD]
[TD]106[/TD]
[TD]-[/TD]
[TD]BobFE[/TD]
[TD]171[/TD]
[TD]-[/TD]
[TD]ckimmey[/TD]
[/TR]
[TR]
[TD]42[/TD]
[TD]-[/TD]
[TD]Sandyt[/TD]
[TD]107[/TD]
[TD]-[/TD]
[TD]FLAPSDOWN[/TD]
[TD]172[/TD]
[TD]-[/TD]
[TD]paul7194[/TD]
[/TR]
[TR]
[TD]43[/TD]
[TD]-[/TD]
[TD]planedriver_2[/TD]
[TD]108[/TD]
[TD]-[/TD]
[TD]scttsprg[/TD]
[TD]173[/TD]
[TD]-[/TD]
[TD]bebopgolf[/TD]
[/TR]
[TR]
[TD]44[/TD]
[TD]-[/TD]
[TD]PT19[/TD]
[TD]109[/TD]
[TD]-[/TD]
[TD]sbrillha[/TD]
[TD]174[/TD]
[TD]-[/TD]
[TD]Big Stikflyer[/TD]
[/TR]
[TR]
[TD]45[/TD]
[TD]-[/TD]
[TD]TimHendrix[/TD]
[TD]110[/TD]
[TD]-[/TD]
[TD]Mike Gretz[/TD]
[TD]175[/TD]
[TD]-[/TD]
[TD]nealmontgomery[/TD]
[/TR]
[TR]
[TD]46[/TD]
[TD]-[/TD]
[TD]jessiej[/TD]
[TD]111[/TD]
[TD]-[/TD]
[TD]skyrat71[/TD]
[TD]176[/TD]
[TD]-[/TD]
[TD]Battle Short[/TD]
[/TR]
[TR]
[TD]47[/TD]
[TD]-[/TD]
[TD]Mr-Punk[/TD]
[TD]112[/TD]
[TD]-[/TD]
[TD]lumppi[/TD]
[TD]177[/TD]
[TD]-[/TD]
[TD]canadian8apilot[/TD]
[/TR]
[TR]
[TD]48[/TD]
[TD]-[/TD]
[TD]rccrasher65[/TD]
[TD]113[/TD]
[TD]-[/TD]
[TD]bchapman[/TD]
[TD]178[/TD]
[TD]-[/TD]
[TD]Mud Duck[/TD]
[/TR]
[TR]
[TD]49[/TD]
[TD]-[/TD]
[TD]FMAY[/TD]
[TD]114[/TD]
[TD]-[/TD]
[TD]scoooper[/TD]
[TD]179[/TD]
[TD]-[/TD]
[TD]EDDIEMAC[/TD]
[/TR]
[TR]
[TD]50[/TD]
[TD]-[/TD]
[TD]Hrannar[/TD]
[TD]115[/TD]
[TD]-[/TD]
[TD]Jolly Popper[/TD]
[TD]180[/TD]
[TD]-[/TD]
[TD]merto31[/TD]
[/TR]
[TR]
[TD]51[/TD]
[TD]-[/TD]
[TD]Razor44[/TD]
[TD]116[/TD]
[TD]-[/TD]
[TD]CNY_Dave[/TD]
[TD]181[/TD]
[TD]-[/TD]
[TD]bisszerk[/TD]
[/TR]
[TR]
[TD]52[/TD]
[TD]-[/TD]
[TD]Ken Kehlet[/TD]
[TD]117[/TD]
[TD]-[/TD]
[TD]rtn9105[/TD]
[TD]182[/TD]
[TD]-[/TD]
[TD]Pork Chop[/TD]
[/TR]
[TR]
[TD]53[/TD]
[TD]-[/TD]
[TD]oldfartpilot[/TD]
[TD]118[/TD]
[TD]-[/TD]
[TD]mbnt
[/TD]
[TD]183[/TD]
[TD]-[/TD]
[TD]bushman8377[/TD]
[/TR]
[TR]
[TD]54[/TD]
[TD]-[/TD]
[TD]Soaring Steve[/TD]
[TD]119[/TD]
[TD]-[/TD]
[TD]crawler tech[/TD]
[TD]184[/TD]
[TD]-[/TD]
[TD]cmy6[/TD]
[/TR]
[TR]
[TD]55[/TD]
[TD]-[/TD]
[TD]freefall2907[/TD]
[TD]120[/TD]
[TD]-[/TD]
[TD]308jockey[/TD]
[TD]185[/TD]
[TD]-[/TD]
[TD]ETpilot
[/TD]
[/TR]
[TR]
[TD]56[/TD]
[TD]-[/TD]
[TD]fix-n-fly[/TD]
[TD]121[/TD]
[TD]-[/TD]
[TD]bparker3[/TD]
[TD]186[/TD]
[TD]-[/TD]
[TD]michaelnel[/TD]
[/TR]
[TR]
[TD]57[/TD]
[TD]-[/TD]
[TD]SigMan[/TD]
[TD]122[/TD]
[TD]-[/TD]
[TD]DBD1[/TD]
[TD]187[/TD]
[TD]-[/TD]
[TD]mortyspals[/TD]
[/TR]
[TR]
[TD]58[/TD]
[TD]-[/TD]
[TD]eroc144[/TD]
[TD]123[/TD]
[TD]-[/TD]
[TD]Chappy110[/TD]
[TD]
[/TD]
[TD]
[/TD]
[TD]
[/TD]
[/TR]
[TR]
[TD]59[/TD]
[TD]-[/TD]
[TD]nextofkin[/TD]
[TD]124[/TD]
[TD]-[/TD]
[TD]ercobud[/TD]
[TD]
[/TD]
[TD]
[/TD]
[TD]
[/TD]
[/TR]
[TR]
[TD]60[/TD]
[TD]-[/TD]
[TD]ALT[/TD]
[TD]125[/TD]
[TD]-[/TD]
[TD]rickpell[/TD]
[TD]
[/TD]
[TD]
[/TD]
[TD]
[/TD]
[/TR]
[TR]
[TD]61[/TD]
[TD]-[/TD]
[TD]jstyle13[/TD]
[TD]126[/TD]
[TD]-[/TD]
[TD]ThunderBoat[/TD]
[TD]
[/TD]
[TD]
[/TD]
[TD]
[/TD]
[/TR]
[TR]
[TD]62[/TD]
[TD]-[/TD]
[TD]WYDAH[/TD]
[TD]127[/TD]
[TD]-[/TD]
[TD]tazzzz[/TD]
[TD]
[/TD]
[TD]
[/TD]
[TD]
[/TD]
[/TR]
[TR]
[TD]63[/TD]
[TD]-[/TD]
[TD]stupidscreenname[/TD]
[TD]128[/TD]
[TD]-[/TD]
[TD]ThunderChicken[/TD]
[TD]
[/TD]
[TD]
[/TD]
[TD]
[/TD]
[/TR]
[TR]
[TD]64[/TD]
[TD]-[/TD]
[TD]coxco[/TD]
[TD]129[/TD]
[TD]-[/TD]
[TD]deanz406[/TD]
[TD]
[/TD]
[TD]
[/TD]
[TD]
[/TD]
[/TR]
[TR]
[TD]65[/TD]
[TD]-[/TD]
[TD]TunnelBill[/TD]
[TD]130[/TD]
[TD]-[/TD]
[TD]biam[/TD]
[TD]
[/TD]
[TD]
[/TD]
[TD]
[/TD]
[/TR]
[/TABLE]
#2749
My Feedback: (3)
Join Date: Feb 2013
Location: goodland, KS
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Hey I built a senior scaled up to 12 feet wing .Flown with ryobi 31 now going to an old byron engine from their Mustang .The huge one ,this engine is a gasser 70 75 should be able to pull it around great. I also built a prop cutter so I can build large props cutting my cost
I am the skater of many cheaps.Also make my own fuel ,More cheaps.I wish I could build batteries.LOL LOL
I am the skater of many cheaps.Also make my own fuel ,More cheaps.I wish I could build batteries.LOL LOL