Morris Knife Plans needed / Build advice
#1
Junior Member
Thread Starter
Join Date: May 2006
Location: palm beach, FL
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Morris Knife Plans needed / Build advice
Hey Guys, Just trying to get a feel for how this build is going to be, from what I've been reading it seems the pull/pull setups are difficult.. , I have a Morris Knife Kit I've been looking to build for a while, I finally decided to give it a go, and never realized the plans weren't in it. So now Im kicking myself for assuming they were on the "Bottom". If anyone out there has a set of plans, digital or print, It would definitely be appreciated! This is more of a sentimental build as I flew one as a kid and wrecked it after 200+ hours with a saito FA-50. Now 15 years later, I want to revisit my childhood. Good Times!!
Any help would be appreciated! Thanks guys!!
Mike
Any help would be appreciated! Thanks guys!!
Mike
Last edited by airforced; 05-01-2017 at 09:12 AM.
#3
Junior Member
Thread Starter
Join Date: May 2006
Location: palm beach, FL
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Hey thanks for the response, the original one i had used the pull pull, but thanks for the tip. Anyone know where or who may have some plans for this kit?