boss351

My Feedback: (6)

Does anyone have any tips on building this plane? I am just starting.
One thing that I would like to do is mount individual aileron servos, any advice on this?
Any build pictures?

Thanks,

Adam

GeraldO

My Feedback: (2)

Have you tried Ron's web-site? http://www.rwdrc.com/

SU31

Hi Adam,

I´ve set up my Mk V with individual Aileron servos
Although it is not really necessary you can programm some differential an
some up deflection for landings. I use hitec 81s since I had tjem in spare
smaller ones will do the job too. Very stable and nice plane!!

SU31

Hi Adam,
two more of the covered wing

regards
Josef

boss351

My Feedback: (6)

Hi Josef,

thanks for the reply! I installed the aileron servos as you did but with a hatch. I am now having difficulty getting my glow motor mounted far enough back against the firewall to not have to extend the cowling too much to get up behind the spinner baseplate. Looks like you went electric so probably less of an issue.

I am contemplating moving the firewall backwards a little but have to figure out the change in angle needed for the offset if I do that, not too keen on that. Today I am going to look for an alternative engine mount and hopefully will have some success.

Adam

PS Did you use a hidden internal antenna or a trailing wire? Any more photos would be really appreciated. Thanks. The last two didn't make it!

SU31

Hi Adam,

2nd attempt
antenna installation as on pics
I routed it out behind the wing saddle so it doesn`t disturb the overall appearance too much

happy landings

ChristerL

Hi Adam,

I used a SLEC engine mount on my Tempest. Needed a little "modification" to get the engine (OS25 FX) all the way back.



To hide the antenna I used some left-over of a yellow Sullivan inner push-rod. It exits at the "tail-wheel" position.



/Christer