Royal Products P-38 building instructions
#1
Thread Starter
Join Date: Jan 2005
Location: riverside, CA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Royal Products P-38 building instructions
anyone! Just was given the kit, but no building instructions. The plans are toast too, but I have them on the way from a friend in Escondido. Would any of you builders of this kit be willing to make me a copy of the building instruction packet? I will pay for the copy, mail and maybe enough extra for a gallon of fuel, etc. I do scratch build, but would like to have some sense of where things go in this kit. It is about half built, but things don't quite look right, and I sure want to make things straight at this point. Any help out there? Thanks
#2
Join Date: Jun 2002
Location: Jacksonville, FL
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
RE: Royal Products P-38 building instructions
I scanned the instructions to my Marutaka P-38 (same as the Royal) to someone about a month ago. I'll see if I can find them tonight and PM you. I started this thread on mine which may help out.
http://www.rcuniverse.com/forum/m_22..._1/key_/tm.htm
http://www.rcuniverse.com/forum/m_22..._1/key_/tm.htm
#3
RE: Royal Products P-38 building instructions
Royal P-38 Building instructions:
Glue block A to block B. Glue block C to block D. ... Glue block QZ24 to block QZ25. Glue all sub block assemblies together, sand to shape. Add engines and hardware and the plane is now complete.
If DamonTX cannot locate his instructions, I can scan and post them tonight.
Scott
Glue block A to block B. Glue block C to block D. ... Glue block QZ24 to block QZ25. Glue all sub block assemblies together, sand to shape. Add engines and hardware and the plane is now complete.
If DamonTX cannot locate his instructions, I can scan and post them tonight.
Scott
#4
My Feedback: (1)
RE: Royal Products P-38 building instructions
ORIGINAL: saramos
Royal P-38 Building instructions:
Glue block A to block B. Glue block C to block D. ... Glue block QZ24 to block QZ25. Glue all sub block assemblies together, sand to shape. Add engines and hardware and the plane is now complete.
If DamonTX cannot locate his instructions, I can scan and post them tonight.
Scott
Royal P-38 Building instructions:
Glue block A to block B. Glue block C to block D. ... Glue block QZ24 to block QZ25. Glue all sub block assemblies together, sand to shape. Add engines and hardware and the plane is now complete.
If DamonTX cannot locate his instructions, I can scan and post them tonight.
Scott
#5
Thread Starter
Join Date: Jan 2005
Location: riverside, CA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
RE: Royal Products P-38 building instructions
That would be great! There looks like a few of you brave souls who have taken on this project. I had originally wanted to scratchbuild this model, but a fellow I build for locally had an old kit he lost interest in, so his loss my gain(I think). I have built the Royal Spit and as said in another post glue A to B C to D and carve, sand, sand, carve and it will eventually become an airplane. We always wondered why they did'nt include a knife in the kit either to help you build or comit herri-kerri. Thanks for all the help. I will look forward to the directions from one of you fine folks.