Professional builder?
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Jun 2002
Location: TN
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Professional builder?
I just bought a Carden 35% edge. I am looking into getting it professionally built, seeing that I don't have very much experience in building. I am 15 in high school, so my money is limited because my parents make my pay for ALL my rc stuff. I need a good builder that doesn't charge an arm and a leg, and does a good job. Any Suggestions?
Thanks
Thanks
#2
Senior Member
My Feedback: (4)
Join Date: Aug 2002
Location: Evans,
CO
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
builders
RCFlyer86 My suggestion would be to find someone at the club where you fly that would be willing to guide you through he building process. There are several people where I fly that would jump at the chance to help a young person with such a project!
Good luck
Mark
Good luck
Mark
#4
Senior Member
My Feedback: (2)
Join Date: Jan 2002
Location: Cordova, TN,
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
Help
Eric, I will offer any help I can. I am about halfway through my Carden Cap and there is nothing cosmic about it. Dennis is only a phone call away, and he is always happy to help. Just start building, getting your hand dirty and do a little research on the side. Ask questions, make a few mistakes, and learn.
Build yourself, you will learn alot, and it will give you much pride. The 35% Edge is my next project.
Jess
Build yourself, you will learn alot, and it will give you much pride. The 35% Edge is my next project.
Jess
#5
Senior Member
My Feedback: (16)
Join Date: Feb 2002
Location: Houston,
TX
Posts: 2,666
Likes: 0
Received 0 Likes
on
0 Posts
Professional builder?
Eric, have you found a builder yet ? Here is a builder I found on RCU while browsing that sounds reasonable and has Carden 35% building experience :
http://www.rcuniverse.com/showthread...hlight=builder
Just an idea !!
http://www.rcuniverse.com/showthread...hlight=builder
Just an idea !!