Bridi Corben Baby Ace
#1
Thread Starter
My Feedback: (51)
Bridi Corben Baby Ace
I was thinking of building the Bridi Corben Baby Ace this winter, but after doing a search here on RCU I have found that there is very little information regarding this Plane. Also I am curious about the Bluejay kits in general, and what kind of quality to expect. So any information regarding the Bridi Corben Baby Ace or Bluejay kits in general would be appreciated.
#5
Senior Member
My Feedback: (2)
Join Date: Sep 2003
Location: Whiteville NC
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
RE: Bridi Corben Baby Ace
Ray, I have the BJ/ Bridi Corben baby ace still in the box. I plan on building sometime soon. This is an excellent looking kit. The wood is very good and the plans are sharp to. Bill, any chance you could tell me what kit or plans you used for the Super Ace. Thanks, Ben
#6
RE: Bridi Corben Baby Ace
It's an old (really old) Ikon N'West kit and plan (joke of the millenium) The wood that Emil shipped was 2X2 (too hard and too heavy). It is typical of the old Ikon kits. You got some good templates, and a rough idea of where to start. The Corben builds light with the appropriate wood replaced, and flies well. This one is powered by a Saito 80, and is borderline overpowered. The flying characteristics are very Cub like, with the exception of a pronounced, "Dutch roll", when under power. This is caused by the small vertical stab being blanked out by the unusual fuselage shape in the wing saddle area. Once you get the idea that the model is going to do this, then there is no problem. Landings are slow, and the model wants to remain in flight until the last second. Stalls are simple, the model drops the nose and resumes flight with application of very little power. The model flies best with lots of differential on the ailerons (lots of up, not much down), and medium throws on the elevator. You need all the rudder (repeat ALL the rudder) that you can get. I built a tailwheel drive system using 1/2 bellcranks and pushrods (way too much throw) but is very effective. The tail surfaces are pull-pull on both rudder and elevator. I'll shut up now, and if you want more info, just ask.
Bill, AMA 4720
WACO Brotherhood #1
Bill, AMA 4720
WACO Brotherhood #1
#7
Senior Member
My Feedback: (2)
Join Date: Sep 2003
Location: Whiteville NC
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
RE: Bridi Corben Baby Ace
Thanks Bill for the info. I have plans for a small parkflyer I plan to scratch sometime. That is a great looking Super Ace you have there. Is she still flying? I think it's also the only one I have ever seen modeled that size also. I'll have to check their site again to see if it's still available. Thanks again! Ben
#8
RE: Bridi Corben Baby Ace
It is still flying and in great condition after all these years. It's about 15 or so years old now, and has tons of air time on her. She still annual's well, and still has that prizefighter look. It's a fun plane, and not one that I would reccomend for just anyone to attempt (as with all Ikon kits).
Bill, AMA 4720
WACO Brotherhood #1
Bill, AMA 4720
WACO Brotherhood #1