wruggiero

Hi Folks, I started today June 21th 2020 , a construction of Sweet Stick from Midwest, I bought this kit at e-bay 7 years ago, but the kit was manufacture in 1992, kook at the newspaper inside the kit.
I inted to use the Gas engime Zenoah 38

wruggiero

The Newspaper inside the kit dated February 1992

1992



Newspaper Post-Tribune




Ribs


wing reinforce

Spar

Plans, avalable at https://outerzone.co.uk/

Kit box

Kit Box


Some some painting ideas

some painting ideas

some painting ideas

rgburrill

Was that kit in air conditioned storage? Those ribs don't all look the same size, especially on the trailing edge. Or are there supposed to be two different lengths?

wruggiero

wruggiero

The Sweet Stick from Midwest wings construction, we need take care with the position of the ribs

wruggiero

It was storage in a room a little bit humid. the ribs are the same size.
I post more photos
Thanks for been here!!!

Constrictor

My Feedback: (46)

A piece of history. good stuff,

wruggiero

plywood for reinforce the center of the wing


Glue the Reinforce center

wruggiero

New Photos from the constructuion of Sweet Stick, a kit from Midwest!!!

wruggiero

wood glue

plated


Wing tip detaisl

Wing tip detaisl

Wing tip detaisl





90 degrees


F3 - I need to open the hole

F1, F2 and F3

Adjusting to glue

wruggiero

Check more constructions at
www.aeromuseu.com

wruggiero

Reinforce the base for Landing gear

wruggiero

Check more details at aeromuseu.com
11-12-2020

wruggiero

Photos January 2021
More Photos at aeromuseu.com

wruggiero

Modification for wing Servo

Modification for wing Servo

Modification for wing Servo

wruggiero

Look the Size of wing

Check the alignment



The wing with Ailerons


detail of the wing

reinforce the firewall

table for tank









command for throttle

Wing pin detail

FlyerInOKC

My Feedback: (6)

Nice looking work! I built a Sweet Stik back in 79 and powered it with a first generation OS/Graupner .30 Wankel. It was a great kit to build!