TF Giant P 47 Flaps
#1
Thread Starter
My Feedback: (40)
Join Date: Mar 2002
Location: Palm Coast,
FL
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
TF Giant P 47 Flaps
The Flap horn extends into the wing itself. The servo attaches to to horn via a rod that hooks up to the horn. It seems to me that with both sides of the wing sheeted, it will be impossible to get the servo hooked up to the rod going to the flap horn. Am I missing something or is there a trick I'm missing out on?
Dennis
Dennis
#3
Thread Starter
My Feedback: (40)
Join Date: Mar 2002
Location: Palm Coast,
FL
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
RE: TF Giant P 47 Flaps
Thanks for the reply. I fully understand the "clevis" program. My issue is getting the clevis hooked to the servo after the right length is determined. The servo is attached to the hatch cover. Seems to me that you cannot hook it up while the servo is atached to the hatch cover.
Just have to see when I get to that point.
Thanks.
Just have to see when I get to that point.
Thanks.