Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
#1
Thread Starter
Join Date: Dec 2005
Location: Feldkirch, AUSTRIA
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
Working with our projects, we really felt, that something does not suffice in our nomenclature of developed models. Something simple, big, beautiful and accessible practically to everyone. And here during any moment we have recollected two models very popular in due time. He/she is fan-flaj NEW BEE and SLOW POKE. Both models were, that is called hands. Both облётаны for years, yes, yes for years! We on the basis of all also have decided to create the best from these models the, unique plane. Have analysed their merits and demerits, were defined with the sizes... And work has begun! Tens variants of configuration have been seen, each knot and each step on assemblage is thought over, variants of motorisation and even installation of floats are considered.
So, here that has turned out as a result of this work. Very compact среднеплан in a big way wings 1800мм, the planned weight 4800 5000 гр. And the motor 20см3. We do not declare it as model of a category the Fan-flaj, we and did not aspire to it. It is the plane approaches to a category of the first petrol trainer with very big inclinations of flight possibilities more likely. The big area covered, concerning small weight, small loading on area unit - that else is necessary for quiet and stable flight?
As motor installation there is a choice between an internal combustion engine and the electromotor. Variants of fastening of both types of engines are provided.
The new whale will be already accessible to sale in the end of this year.
Model assemblage will be in this theme in the near future...
So, here that has turned out as a result of this work. Very compact среднеплан in a big way wings 1800мм, the planned weight 4800 5000 гр. And the motor 20см3. We do not declare it as model of a category the Fan-flaj, we and did not aspire to it. It is the plane approaches to a category of the first petrol trainer with very big inclinations of flight possibilities more likely. The big area covered, concerning small weight, small loading on area unit - that else is necessary for quiet and stable flight?
As motor installation there is a choice between an internal combustion engine and the electromotor. Variants of fastening of both types of engines are provided.
The new whale will be already accessible to sale in the end of this year.
Model assemblage will be in this theme in the near future...
#2
RE: Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
ORIGINAL: VOX
The new whale will be already accessible to sale in the end of this year.
The new whale will be already accessible to sale in the end of this year.
#7
Thread Starter
Join Date: Dec 2005
Location: Feldkirch, AUSTRIA
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
RE: Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
Thanks for your interest to this project.
The model has wingspan of 1800 mm, motor ZG 20 or similar to it, there is an updating for the electromotor. Also we offer the version for launch from water and snow.
The model has wingspan of 1800 mm, motor ZG 20 or similar to it, there is an updating for the electromotor. Also we offer the version for launch from water and snow.
#9
Join Date: Jan 2003
Location: Sarnia, ON, CANADA
Posts: 966
Likes: 0
Received 0 Likes
on
0 Posts
RE: Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
WOW!!
ALL of the frame is laser cut! I have built both the NEWBEE and the Speedy Bee - they were stick designs, I had to piece together rudders, ailerons, elevator and such... from what I can see - you have done ALL of that for us!
This is going to be an interesting thread to follow and I look forward to finding out where I can buy one (or two) of these kits! [sm=thumbs_up.gif]
For all of you fellows out there that do not speak Metric. Allow me to do the conversion for you;
From the web sites;
http://www.sciencemadesimple.com/length_conversion.php
1800 mm = 70.87 inches
http://www.onlineconversion.com/weight_common.htm
4800- 5000 grams = 10.6 – 11 pounds
20cc engine = 1.20 two stroke
This is going to be a BIG BEE!
ALL of the frame is laser cut! I have built both the NEWBEE and the Speedy Bee - they were stick designs, I had to piece together rudders, ailerons, elevator and such... from what I can see - you have done ALL of that for us!
This is going to be an interesting thread to follow and I look forward to finding out where I can buy one (or two) of these kits! [sm=thumbs_up.gif]
For all of you fellows out there that do not speak Metric. Allow me to do the conversion for you;
From the web sites;
http://www.sciencemadesimple.com/length_conversion.php
1800 mm = 70.87 inches
http://www.onlineconversion.com/weight_common.htm
4800- 5000 grams = 10.6 – 11 pounds
20cc engine = 1.20 two stroke
This is going to be a BIG BEE!
#10
My Feedback: (20)
RE: Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
It looks much better than the original Big Bee. http://www.bridiairplanes.com/hangar/bigbee.html
Very Light weight structure.
Very Light weight structure.
#12
Thread Starter
Join Date: Dec 2005
Location: Feldkirch, AUSTRIA
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
RE: Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
Yesterday I smoothed out all details about have checked all connections before the assemblage beginning. Everything, that now on my table - is collected without glue...
#13
Senior Member
My Feedback: (14)
RE: Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
ORIGINAL: Kmot
I like this new design a lot! It's very cute. Looks like it would be a nice lazy slow flying plane.
I like this new design a lot! It's very cute. Looks like it would be a nice lazy slow flying plane.
-
I'm with you, Kmot. The very slight sweep in the wing's leading edge gives it a terrific look, reminiscent of the Shoestring pylon racer.
Ed Cregger
#16
Join Date: Jan 2003
Location: Sarnia, ON, CANADA
Posts: 966
Likes: 0
Received 0 Likes
on
0 Posts
RE: Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
From what I could see the fellow is from Russa - they have been building great planes for years.
Here's hoping that this one is just as good!
#23
Thread Starter
Join Date: Dec 2005
Location: Feldkirch, AUSTRIA
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
RE: Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
Thanks for your interest to ours to the project!
I wish to write, that I am engaged in designing and manufacturing of our building sets of planes together with my friend and the partner. We together develop the concept of our models. Together them we do. Therefore about model, its design and manufacturing I wish to divide all your pleasant responses half-and-half. We equal participants of this project!
You can always contact us. Our contact data on our site:
http://big-scale-fly.com/
This model will be produced and in the reduced version. In general in our plans to let out in the near future the version for the motor 50см3 (2200мм) and biplane for the motor 100см3 (2300мм
I wish to write, that I am engaged in designing and manufacturing of our building sets of planes together with my friend and the partner. We together develop the concept of our models. Together them we do. Therefore about model, its design and manufacturing I wish to divide all your pleasant responses half-and-half. We equal participants of this project!
You can always contact us. Our contact data on our site:
http://big-scale-fly.com/
This model will be produced and in the reduced version. In general in our plans to let out in the near future the version for the motor 50см3 (2200мм) and biplane for the motor 100см3 (2300мм
#24
Senior Member
My Feedback: (3)
Join Date: Feb 2002
Location: WinnipegManitoba, CANADA
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
RE: Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
Neat looking design - sort of a blend between a GP Slow Poke & Clancy Speedy Bee. I like that the wing isn't flat bottomed. The generous wing area should make this well suited to gas - imagine the Saito 36cc 4 stroke gasser in that. Classic! Availability - cost?
#25
Thread Starter
Join Date: Dec 2005
Location: Feldkirch, AUSTRIA
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
RE: Allow to be presented – the Big Bee...(Kit Big-Scale-Fly)
Today work with a fuselage has proceeded. All has joined and has converged. Glue PVA has allowed to collect in a current of pair hours that in photos. Now work proceeds and already tomorrow as I plan a fuselage will be practically collected...