AMR 50 Trainer
#351
Senior Member
Join Date: Nov 2008
Location: Longueuil, QC, CANADA
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
RE: AMR 50 Trainer
Hello Ron,
Glad that you finally fly the T50. At least she will take some flying time with the new owner. Maybe he will be interest with the cargo100!
Vincent
Glad that you finally fly the T50. At least she will take some flying time with the new owner. Maybe he will be interest with the cargo100!
Vincent
#352
Senior Member
Thread Starter
RE: AMR 50 Trainer
It is polyester dress linning. It comes in various weights. I can't remember what I used. I bought it at Hancock Fabrics. Very inexpensive. BTW, to stick it to the plane I put a couple of coats of tinted non-taunting dope where I intended to stick it, let the dope dry then cut the poly to approximate size, lay it in position and applied the same dope where I had previously. It melts the previously coats and acts like glue. After that I used a heat gun very carefully to shrink the poly. Be careful because it will melt. Then I started filling the fabric with the polyurathane. Be careful not to put the urathane on too heavy until the fabric is sealed because it will drip through on the inside of the opposite side and it will show up if other than solid colors are used to finish. Good luck.