Pavel Bosak Jet Trainer Build Thread RCM 972
#26
Thread Starter
Join Date: Jan 2007
Location: Box Elder, SD FL
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pavel Bosak Jet Trainer Build Thread RCM 972
The nose black was pepet for sanding. F-3a were added. A 3/16 sheet was whetted and installed then cut and sanded
#27
Thread Starter
Join Date: Jan 2007
Location: Box Elder, SD FL
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pavel Bosak Jet Trainer Build Thread RCM 972
Nose was sanded to shape. (what a job that was) 3/16 top deck was sanded to shape. I then add the nose to the fuselage and clapped it. And know on to the hatch 1/64 pay was used add f-1a and f-2a. 3/16 was add to the sides and top thin sanded. I well use the belt sander to get the shape I need when I get up.
#28
Thread Starter
Join Date: Jan 2007
Location: Box Elder, SD FL
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pavel Bosak Jet Trainer Build Thread RCM 972
O.K I got the hitch sanded whith the belt sander I then test fet it on the fuselage jest a bet more sanding to do but that well be for later. Fetted the V. fin and mad a inline cut to help with lining up the v. fin later on. And the ruder rod caseing as been added[8D]
#29
Thread Starter
Join Date: Jan 2007
Location: Box Elder, SD FL
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pavel Bosak Jet Trainer Build Thread RCM 972
Nose gare block CAed and braced in to place. F-2 was cut to let the gare up into the fuselage. The fiul thank has been put together