RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Kit Building (https://www.rcuniverse.com/forum/kit-building-121/)
-   -   ~~Sig Kadet Brotherhood~~. (https://www.rcuniverse.com/forum/kit-building-121/11394455-%7E%7Esig-kadet-brotherhood%7E%7E.html)

GaryHarris 02-03-2013 04:54 AM

RE: ~~Sig Kadet Brotherhood~~.
 
I started a LT40 build thread here if anyone is interested. The kit should show up on Wednesday. It ll be my fourth LT40.

http://www.rcuniverse.com/forum/m_11392202/tm.htm

I haven't done any of the other Kadets yet, but it looks like now Ill have to start a collection. :)

hutchis 02-03-2013 04:55 AM

RE: ~~Sig Kadet Brotherhood~~.
 
1 Attachment(s)
Here's my LT40 float plane built from a kit with some modifications (dual aileron servos, bolt on wing, tail dragger set up). It is covered with ultra cote and has an 0s 55 AX. Below is a link to some action on the River last Memorial Day. Can't wait to take it out of winter hibernation and get going again this spring.

Cheers..Hutch

http://www.youtube.com/watch?v=i0NLLCO7LiE

TimHendrix 02-03-2013 05:00 AM

RE: ~~Sig Kadet Brotherhood~~.
 
Kadet MKII in 1983 when I was 13 years old. OS .35 for power. Couple of Seniors since then and an LT 40 my daughter assembled when she was about 12. Still using it as a club trainer. I'd like to build another MKII for old times sake.

GaryHarris 02-03-2013 05:06 AM

RE: ~~Sig Kadet Brotherhood~~.
 


ORIGINAL: hutchis

Here's my LT40 float plane built from a kit with some modifications (dual aileron servos, bolt on wing, tail dragger set up). It is covered with ultra cote and has an 0s 55 AX. Below is a link to some action on the River last Memorial Day. Can't wait to take it out of winter hibernation and get going again this spring.

Cheers..Hutch

http://www.youtube.com/watch?v=i0NLLCO7LiE
Absolutely gorgeous LT40 Hutch. I'm wondering, how did you cover the fuse? Did you do the trans red in the cut outs first? And how did you do the white? Did you pre-cut the knock out areas before ironing down?

Slavko 02-03-2013 05:57 AM

RE: ~~Sig Kadet Brotherhood~~.
 
Count me in also.  Built my first MK II back in about 1980.  Sold it when I got out of the hobby and got it back from the same fellow 25 years later.  Still have it and have built 4 more since then.  Great plane.
Joel

hutchis 02-03-2013 06:02 AM

RE: ~~Sig Kadet Brotherhood~~.
 
Thank you.. For the Fuse Pattern I traced the pre cut knock out areas on each fuse side (and top) onto a paper pattern. Next I applied the red transperent covering just on the areas of the fuse with the knock outs. Then I took the paper patterns that were traced laid them over a section of white covering, cut out the knock outs, then laid them on accordingly. It took some time but it kept me busy last winter.....

lkruse 02-03-2013 06:15 AM

RE: ~~Sig Kadet Brotherhood~~.
 
1 Attachment(s)
Throw me into the mix. Attached is a shot of my Kadet Senior ARF.

Larry Kruse

flyingagin 02-03-2013 06:16 AM

RE: ~~Sig Kadet Brotherhood~~.
 
1 Attachment(s)
Hey the water looks fine. I think I will also jump in. Splashhttp://www.rcuniverse.com/forum/js/f...eeth_smile.gif

I presently have 2 Kadets.
A Kadet SR and a Jr. My third junior I think.

The SR was a kit build when I got back from Desert Storm. The Jr is a scratch build and then rebuild from a set of original plan from the first 2 Jrs. The rebuild came about after trying to force it off of grass resulting in a tip stall that left me with a completely trashes fuse. OS .25 powered.

The SR uses a rather worn out Saito .65.

Dihedral on both was reduce by 1/2.


Ken

<br type="_moz" />

GaryHarris 02-03-2013 06:29 AM

RE: ~~Sig Kadet Brotherhood~~.
 
Thanks Hutch. I might do the same thing with mine except in green. I have been on sort of a green kick lately. Not many folks use green and I thinks it's a little different.

Got some new members yall... Welcome to the Kadet brotherhood. [8D]



GaryHarris. Number 1.
soarrich. Number 2.
N1EDM. Number 3.
Live Wire. Number 4.
5skyhawk172. Number 5.
zippome. Number 6.
shepard62 . Number 7.
GraemeEllis . Number 8.
archie05 . Number 9.
tomgreen. Number 10.
n2ryd. Number 11.
race61. Number 12.
Slavko. Number 13.
lkruse. Number 14.
flyingagin. Number 15.

Welcome guys.

cordell staker 02-03-2013 07:07 AM

RE: ~~Sig Kadet Brotherhood~~.
 
1 Attachment(s)
My kadet senior with the twins hank and jude, the thrust line and control surface angles are not modified. I think I added 18 lbs. of weight. I flew it before with an O.S. 60...I have set this up for a 90 just to make sure it gets off the ground. Gonna train my grand kids on Mad Max:D

GaryHarris 02-03-2013 07:36 AM

RE: ~~Sig Kadet Brotherhood~~.
 
Another Texan! :D

Looks awesome brother! The Senior with ailerons is on my bucket list.

JPNYGAARD 02-03-2013 08:10 AM

RE: ~~Sig Kadet Brotherhood~~.
 
1 Attachment(s)


ADD ME TO THE LIST!! I HAVE A KADET SR. ARF AND A SR. KIT ( MY FIRST KIT IN 50+ YEARS ) ON THE DINING ROOM TABLE.</p>

foodstick 02-03-2013 08:33 AM

RE: ~~Sig Kadet Brotherhood~~.
 
I realized I never posted a finished picture of my Senior with a sort of twisted history,
I do have a fuse shot from the build once covered ...
http://images.rcuniverse.com/forum/u...81/Db86043.jpg

Here is the story on my Senior, the wing is from an airplane built by a father and son 20 years ago, it was silkspan and dope.. The plane was flown until it needed lots of work, then donated to the club. it flew as a trainer until the wing fell off in flight ! I ended up with the wing after the crash.. it survived mostly but had broken wing tips.

A different friend had given me 2 broken senior arf wings, one had good wing tips only... So I put them on the kit built wing !

Someone else gave me a fuse kit a couple years later, so I used that and a bit of 1/8th birch ply i had laying around to build a big bomb bay in the airplane.

Another friend had a yak 54 that he crashed, and the tail was on the wall in his basement, I said wow that would look good if I cut it down..on my senior.. He said take it, I did ;)

I bent my own landing gear wire to resemble an old timer, and made the plane a tail dragger.

Another friend quit the hobby and gave me a bunch of fabric covering, so thats where the skin came from.

The wheels I believe were discards from an arf kit.

Custom bilt the cowl for an electric motor, that swings a 16-8 prop.

Taught myself to fly on a Seniorita so you had better sign me up ;)

Live Wire 02-03-2013 09:01 AM

RE: ~~Sig Kadet Brotherhood~~.
 
1 Attachment(s)
Man this is getting interesting:eek: What a great line of planes and what can and has been done to them. Now I am going to have to get another just to be able to build with the brotherhood:D
Larry K

ovationdave 02-03-2013 10:45 AM

RE: ~~Sig Kadet Brotherhood~~.
 
1 Attachment(s)
Ok, mine is still in the box, its a 1976 kit, just picked it up at a resale shop about a month ago, its destined for floats when it gets to my board. Probably over the summer......should be a quick build.

I will take a number......Thanks!

Dave

ovationdave 02-03-2013 12:11 PM

RE: ~~Sig Kadet Brotherhood~~.
 
BTW......there is Kadet Jr. for sale on RCU for $60.........

~Dave

Nergall 02-03-2013 12:17 PM

RE: ~~Sig Kadet Brotherhood~~.
 
1 Attachment(s)
Count me in!

Senior with an OS .46LA: Been flying it for years. Plan to try FHSS with it shortly, if Tower ever ships those 14sg radios out.

GaryHarris 02-03-2013 12:23 PM

RE: ~~Sig Kadet Brotherhood~~.
 
Wow! I had no idea this would grow so quickly. Welcome to the Kadet Brotherhood guys! I have a feeling Sig's kit sales will be on the rise soon. Just from me! :)

GaryHarris. Number 1.
soarrich. Number 2.
N1EDM. Number 3.
Live Wire. Number 4.
5skyhawk172. Number 5.
zippome. Number 6.
shepard62 . Number 7.
GraemeEllis . Number 8.
archie05 . Number 9.
tomgreen. Number 10.
n2ryd. Number 11.
race61. Number 12.
Slavko. Number 13.
lkruse. Number 14.
flyingagin. Number 15.
JPNYGAARD. Number 16.
foodstick. Number 17.
ovationdave. Number 18.

joebahl 02-03-2013 12:29 PM

RE: ~~Sig Kadet Brotherhood~~.
 
I sold my kit built topfight AT-6 and he through in a ARF Kadet SR if i took 30 bucks off my bird so my son wanted to learn and i made the deal.A couple weeks later i found my son a electrict e-flight apprentice in another swap so i want to add flaps and barn door ail plus a bomb drop to the SR plus some floats for water fun. Count me in and i will post picture's of the operation later.:D lol joe

WI53072 02-03-2013 12:31 PM

RE: ~~Sig Kadet Brotherhood~~.
 
I would like to be added to the Kadet brotherhood please!! I love my Kadet Senior. I converted it to a taildragger and powered it with a Saito .72. Nice flying plane like all Kadets!!!


Paul

huck1199 02-03-2013 12:35 PM

RE: ~~Sig Kadet Brotherhood~~.
 
1 Attachment(s)
You missed adding me. Thanks Huck

Built in 1986 with an Irvine .40. Still flying now - great plane.<br type="_moz" />

Top_Gunn 02-03-2013 12:52 PM

RE: ~~Sig Kadet Brotherhood~~.
 
Please add me. I have an LT-40, a Kadet Sr (with ailerons added) and a highly modified Kadet Seniorita. In a year or so I hope to build a Kadet Sr. with the wing on the bottom.

rhamil 02-03-2013 12:53 PM

RE: ~~Sig Kadet Brotherhood~~.
 
Built my first senior from plans in 1976

GaryHarris 02-03-2013 01:02 PM

RE: ~~Sig Kadet Brotherhood~~.
 
If I miss anyone, I apologize. If you want to be added to the Brotherhood, please note so.

Welcome to our newest brothers of the Kadet Clan. :)

GaryHarris. Number 1.
soarrich. Number 2.
N1EDM. Number 3.
Live Wire. Number 4.
5skyhawk172. Number 5.
zippome. Number 6.
shepard62 . Number 7.
GraemeEllis . Number 8.
archie05 . Number 9.
tomgreen. Number 10.
n2ryd. Number 11.
race61. Number 12.
Slavko. Number 13.
lkruse. Number 14.
flyingagin. Number 15.
JPNYGAARD. Number 16.
foodstick. Number 17.
ovationdave. Number 18.
joebahl. Number 19.
WI53072. Number 20.
huck1199. Number 21.
Top_Gunn. Number 22.

GaryHarris 02-03-2013 01:08 PM

RE: ~~Sig Kadet Brotherhood~~.
 
Some pics of my last LT40 that I unfortunately never finished. I was moving and had to thin the heard, so I gave it to a friend. I took out most of the dihedral, converted it to a bolt down wing and a taildragger. I got some of the covering done. Solartex antique.

http://i261.photobucket.com/albums/i...ps18ed3ff0.jpg

http://i261.photobucket.com/albums/i...pseb767103.jpg

http://i261.photobucket.com/albums/i...ps96194dca.jpg

http://i261.photobucket.com/albums/i...ps9d87603a.jpg


All times are GMT -8. The time now is 09:05 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.