Caliber30 upgrade with Raptor parts
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Tlaxcala, MEXICO
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Caliber30 upgrade with Raptor parts
hi everyone
I have a inquietud about if is posible make upgrade to caliber30 with the metal parts of raptors.
Are not know but, are there parts of raptors that to be similar on dimensional with the caliber30.
are there experience with this subject
Thanks you
Rafael
Mexico[8D]
I have a inquietud about if is posible make upgrade to caliber30 with the metal parts of raptors.
Are not know but, are there parts of raptors that to be similar on dimensional with the caliber30.
are there experience with this subject
Thanks you
Rafael
Mexico[8D]
#2
Senior Member
Join Date: Apr 2006
Location: Johannesburg, SOUTH AFRICA
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
RE: Caliber30 upgrade with Raptor parts
Rafael,
I don't think the metal head will work, but I'm not entirely sure.
The upgrades I did to my cali were the skids and canopy. All raptor mechanics are different and I think you can use the rappy boom.
Rgds,
Ross
I don't think the metal head will work, but I'm not entirely sure.
The upgrades I did to my cali were the skids and canopy. All raptor mechanics are different and I think you can use the rappy boom.
Rgds,
Ross
#3
Junior Member
My Feedback: (1)
Join Date: Aug 2004
Location: Winnsboro,
TX
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: Caliber30 upgrade with Raptor parts
The vertical stabilizer will work with modification. Its a bit longer than the Caliber's.
The canopy will fit with some slight mods, too.
The TT 550 CF Blades are a great upgrade from the stock Caliber's woodies, and at a reasonable cost.
Bob
The canopy will fit with some slight mods, too.
The TT 550 CF Blades are a great upgrade from the stock Caliber's woodies, and at a reasonable cost.
Bob