Running your Norvel
04-27-2011, 02:14 AM
#1
Junior Member
Thread Starter
Join Date: Jun 2009
Location: NSW, AUSTRALIA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Running your Norvel
Norvel in the 110 heli is the best choice motor,,most people have start and running problems.
The answer is simply the starter cone is alloy and too lite ..Making a new starter cone out of brass about the samesize but heavier will make it easy to start and run great..
I always started mine with a flick between my fingers.....
The answer is simply the starter cone is alloy and too lite ..Making a new starter cone out of brass about the samesize but heavier will make it easy to start and run great..
I always started mine with a flick between my fingers.....
05-17-2011, 04:10 PM
#3
Junior Member
My Feedback: (12)
Join Date: Sep 2003
Location: OGDEN,
UT
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Running your Norvel
hum, being the pround owner of a smity mill/lathe and an owner of a old 110
and haveing a chunk of bar brass i see an interesting prodjecr forming.
thanks for the info.
and haveing a chunk of bar brass i see an interesting prodjecr forming.
thanks for the info.
