Help!!! with brakes on XXL MT LOSI
#26
Senior Member
Join Date: Aug 2010
Location: Lowell,
MA
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
ORIGINAL: Mclovin350z
I'm not spending 80 bucks a piece on freakin servos.
I'm not spending 80 bucks a piece on freakin servos.
#27
Member
Thread Starter
Join Date: Nov 2010
Location: Mechanicsville,
MD
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
405 oz of torque sounds awsome to me. If you have time shoot me the link to those Ntrain so I can look into them more. Are those servos a easy swapout or will I have to make mods to the chassis? Thanks bro..
#28
Member
Thread Starter
Join Date: Nov 2010
Location: Mechanicsville,
MD
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
Forgot to ask If i remember right the Battery in the Losi XXL is only 6 v am I correct? In order to have the power to run the stronger servos do you also need a bigger/stronger Voltage Battery pack for inside the Model Body to push them beast?
#29
Member
Thread Starter
Join Date: Nov 2010
Location: Mechanicsville,
MD
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
Lmao at Mclovin... I agree 80 a pop is pretty damn expensive... Hell all nitro stuff gets costly if you set it all up right it seems.
#30
Member
Thread Starter
Join Date: Nov 2010
Location: Mechanicsville,
MD
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
Just looking for the most reliable servos with enough torque to give me a quicker turn radius and better overall response in the steering. Thanks Ntrain...
P.S More then likely will only get 2 new steering servos and then move one of the stock steering servos over to the brake/throttle. That should give me plenty of torque for what I need it for.
P.S More then likely will only get 2 new steering servos and then move one of the stock steering servos over to the brake/throttle. That should give me plenty of torque for what I need it for.
#31
Senior Member
Join Date: Aug 2010
Location: Lowell,
MA
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
ORIGINAL: rcguy1979
405 oz of torque sounds awsome to me. If you have time shoot me the link to those Ntrain so I can look into them more. Are those servos a easy swapout or will I have to make mods to the chassis? Thanks bro..
405 oz of torque sounds awsome to me. If you have time shoot me the link to those Ntrain so I can look into them more. Are those servos a easy swapout or will I have to make mods to the chassis? Thanks bro..
#32
Senior Member
Join Date: Aug 2010
Location: Lowell,
MA
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
ORIGINAL: rcguy1979
Forgot to ask If i remember right the Battery in the Losi XXL is only 6 v am I correct? In order to have the power to run the stronger servos do you also need a bigger/stronger Voltage Battery pack for inside the Model Body to push them beast?
Forgot to ask If i remember right the Battery in the Losi XXL is only 6 v am I correct? In order to have the power to run the stronger servos do you also need a bigger/stronger Voltage Battery pack for inside the Model Body to push them beast?
#33
Senior Member
Join Date: Aug 2010
Location: Lowell,
MA
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
ORIGINAL: rcguy1979
Just looking for the most reliable servos with enough torque to give me a quicker turn radius and better overall response in the steering. Thanks Ntrain...
P.S More then likely will only get 2 new steering servos and then move one of the stock steering servos over to the brake/throttle. That should give me plenty of torque for what I need it for.
Just looking for the most reliable servos with enough torque to give me a quicker turn radius and better overall response in the steering. Thanks Ntrain...
P.S More then likely will only get 2 new steering servos and then move one of the stock steering servos over to the brake/throttle. That should give me plenty of torque for what I need it for.
If you do go with the TS-170's at 6volts you will have basically 666oz of torque at 6volts. That equates to about 60-70 foot pounds of torque. The steering upgrade is SERIOUS using those.
#34
Member
Thread Starter
Join Date: Nov 2010
Location: Mechanicsville,
MD
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
Ntrain do you have to buy any special topper pieces for upgraded servos of can you just reuse the ones that come stock on the Losi XXL Steering servos? Im thinking I might order 2 of the ppp since they seem to have a good amount of torque and build quality for the money. Have the PPP servos worked well for you and helped with sharper turning?
#35
Senior Member
Join Date: Aug 2010
Location: Lowell,
MA
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
ORIGINAL: rcguy1979
Ntrain do you have to buy any special topper pieces for upgraded servos of can you just reuse the ones that come stock on the Losi XXL Steering servos? Im thinking I might order 2 of the ppp since they seem to have a good amount of torque and build quality for the money. Have the PPP servos worked well for you and helped with sharper turning?
Ntrain do you have to buy any special topper pieces for upgraded servos of can you just reuse the ones that come stock on the Losi XXL Steering servos? Im thinking I might order 2 of the ppp since they seem to have a good amount of torque and build quality for the money. Have the PPP servos worked well for you and helped with sharper turning?
#36
Member
Thread Starter
Join Date: Nov 2010
Location: Mechanicsville,
MD
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help!!! with brakes on XXL MT LOSI
Yeah I emailed the seller yesterday about the servo savers and still no response back.. Wait and see what the seller says I guess.