Slipper Clutch Pads?
01-18-2014, 05:41 PM
#1
Member
Thread Starter
Join Date: Nov 2005
Location: Chico ,
CA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Slipper Clutch Pads?
I just got a used LST2 and I love it, it just has one small problem. Sometimes the tranny engages and sometimes it doesn't (it's getting worst now). I'm thinking it's the slipper pads. I can turn the spur gear by hand and the tranny doesn't engage. I have also tighten the nut at the end and doesn't make a difference. I'm not familiar with this truck and any help would be great.
01-19-2014, 09:34 PM
#2
Senior Member
Join Date: Aug 2004
Location: richmond, CA
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
maybe some few things need to adjust.
1st. it need to speed up a little bit, turn your high end 1/16 turn, check your engine temp if less than 260 F first. Or
2nd . you may adjust (loosen 1/8 turn) the 2 cam adjusting screw of your second gear clutch so it will change gear early.
1st. it need to speed up a little bit, turn your high end 1/16 turn, check your engine temp if less than 260 F first. Or
2nd . you may adjust (loosen 1/8 turn) the 2 cam adjusting screw of your second gear clutch so it will change gear early.
