Losi LST/ Traxxas Summit Build
04-18-2015, 10:08 AM
#1
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Losi LST/ Traxxas Summit Build
Parts to finish have been ordered and on the way!
https://www.youtube.com/watch?v=6BTO12tp1Sw&ab_channel=twissted
https://www.youtube.com/watch?v=6BTO12tp1Sw&ab_channel=twissted
04-21-2015, 02:10 PM
#2
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
I'm changing to a single lipo mount and adding rock sliders to get a more scale and better look.
I used the rear bumper to a Traxxas Slayer Pro.
I used the rear bumper to a Traxxas Slayer Pro.
04-22-2015, 09:43 PM
#3
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Because this is a rock buggy I wanted everything to be plastic so that it doesn't get hung up in the rocks I also am going with only 1 lipo to run this buggy to keep the weight down and also to get the bottom a lot cleaner so that it doesn't hang up also.
04-25-2015, 09:25 PM
#5
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
After I got home from running my 1/5 Summit build I checked the mail box and found the Teckno V3 lipo tray!
So it took a hole 5 min. to install.
The lipo is a old 4s 4000 mah.
So it took a hole 5 min. to install.
The lipo is a old 4s 4000 mah.
05-08-2015, 06:29 AM
#8
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
05-10-2015, 07:22 PM
#9
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by twissted; 05-13-2015 at 09:21 PM.
05-27-2015, 10:55 PM
#12
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Here is a peak at the wheel base. It ended up being 17.5'' and that is ok by me!
I found a bent shock shaft, so I installed some Titanium shafts to all four shocks.
I found a bent shock shaft, so I installed some Titanium shafts to all four shocks.
06-12-2015, 04:44 PM
#16
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
When was the last time you seen a Build this clean? I'm waiting on the pair of SMC 2s 9000mah 60c lipos to install. The wheels are getting RC4WD 8.58" Roclox tires mounted to the steel Beadlock rims.
I have some new lights on the way and the painting of a few cage parts are also in the works. I will cut some lenses for the rear lights just as I have done in the past.
It's getting close folks!
The owner wants it done before The 4th of July. I will be done next week.
Last edited by twissted; 06-12-2015 at 04:51 PM.
06-15-2015, 09:53 PM
#17
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
8.5/8'' tires look great on this build. The beadlock rims are sweet as well!
THEY MAKE MY 1/5 SCALE TIRES LOOK SMALL!!!!!!!!!!!!!!!!!!!!!!!!!!
THEY MAKE MY 1/5 SCALE TIRES LOOK SMALL!!!!!!!!!!!!!!!!!!!!!!!!!!
06-18-2015, 11:12 AM
#18
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by twissted; 06-19-2015 at 08:43 AM.
06-23-2015, 04:27 PM
#19
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
07-14-2015, 02:18 PM
#22
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
07-21-2015, 03:50 PM
#23
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
07-21-2015, 03:51 PM
#24
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
