Sales Man Needed!!!!!!!!!!!!!!!!!!!!! (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> Employment, Jobs, Help Wanted in Radio Control Industry



Message

Falcons Cuz -> Sales Man Needed!!!!!!!!!!!!!!!!!!!!! (11/3/2010 11:11 PM)

Hello Guys
I am having a lot of Honda 26cc converted gas engines for sale about 60 engines .These are brand new four stroke engines from a Honda power tool and these engines are pending for patient so i got all these engines from a dealer of power tool engines i have sold a few of them but i do not have time to sell all of them so i want a sales man who will sell these engines for me and i will give $15 USD on the sale of each engine so if any one of you are interested to work for me then contact me at my email address.These are the discriptions of the engines

RPM 5,000
Made Japan
Propeller 17*8/18*6
Weight 2.5 kg
Displacement 26 cc
Horsepower 1.2
Cost $120 USD
Ignition Transistorized magneto
Type Four stroke
Carburetor Walbro type
Net torque 1.1 N.M at 5,000 RPMs

If you guys want any other information about the engine then feel free to contact me at my email address or call me the following are a few pics of the converted motor
falconsamad@gmail.com



tschuy -> RE: Sales Man Needed!!!!!!!!!!!!!!!!!!!!! (11/4/2010 12:42 AM)

Not much of a hub to support the prop.  Seems it would be better to have more surface area to bite and hold the prop. 

Have you thought about putting these up on Ebay? 

My two cents....



jester_s1 -> RE: Sales Man Needed!!!!!!!!!!!!!!!!!!!!! (11/5/2010 4:23 AM)

Second that. The prop isn't going to stay on for long with that setup. Looks dangerous to me. No way I'd sell them and expose myself to a lawsuit. And I'm also not too thrilled with a heavy 26cc that only does 5k rpms.



jester_s1 -> RE: Sales Man Needed!!!!!!!!!!!!!!!!!!!!! (11/5/2010 4:52 AM)

Second that. The prop isn't going to stay on for long with that setup. Looks dangerous to me. No way I'd sell them and expose myself to a lawsuit. And I'm also not too thrilled with a heavy 26cc that only does 5k rpms.



raptureboy -> RE: Sales Man Needed!!!!!!!!!!!!!!!!!!!!! (6/29/2011 8:21 PM)

Your kidding, right? 2.5 kilo's at 1.4 hp, thats almost 5lbs for an engine! I don't see much of a conversion there. Good luck with it. My DLE 20 puts out 2.5 hp at 29oz weight.



USMCrawler -> RE: Sales Man Needed!!!!!!!!!!!!!!!!!!!!! (9/7/2011 11:24 PM)

How is it possible to patent something that is built by another company , you got on sale , and attached a prop to ? Seems strange..........



expresscraft -> RE: Sales Man Needed!!!!!!!!!!!!!!!!!!!!! (11/2/2011 4:05 PM)

change that prop adapter to a 1/4 collet and make it water cooled, put the pullstart back on and i would give it a go in a boat, you cant beat a honda motor, if there is a clutch option that would be even better.



Kostas1 -> RE: Sales Man Needed!!!!!!!!!!!!!!!!!!!!! (5/15/2012 3:12 PM)

I'll give you 50$+shipping for one!



fgdsfg -> RE: Sales Man Needed!!!!!!!!!!!!!!!!!!!!! (1/21/2013 8:59 AM)

put these up on Ebay will help you to sold it soon, good luck.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.
0.140625