you AT-6 guys will love this!! check it out!!! (Full Version)

All Forums >> [RC Airplanes] >> RC Warbirds and Warplanes



Message

gluefinger -> you AT-6 guys will love this!! check it out!!! (8/2/2003 9:49:33 AM)

I just received my kit from [email]Scaledynamics@yahoo.com[/email] this has got to be the finest glass work around! Everything molded in...panel lines, rivets, doors, raised panels, scoops, and cowl is same way! Foam wings that have precut ails, flaps, servo openings, has optional glass center section with everything..panel lines, rivets, gas cap etc. I have never seen a better glass job. PLUS you wouldn't believe how light this is!! I could go on and on, but check this out foryourself at [email]Scaledynamics@yahoo.com[/email] or ck out the pics at New products and manufactures news site!!!!



FireBee -> bad link (8/2/2003 4:45:27 PM)

Gluefinger, link is an outlook email not a website.

I did google searchs on scale dynamics etc and only found plastic models.

We need the website !!!!!!!!
Whats the size, wingspan of AT-6?



redtail -> RE: bad link (11/19/2003 3:55:20 AM)

[:D] Hey Gluefinger, just rec'd my AT-6 also. You are certainly right with regards to the fine glass work. I could not believe the level of detail myself. Hope the rest of the AT-6 lovers will inquire into this product. Glad I made the choice to purchase one.



vinnie -> RE: bad link (11/19/2003 3:07:37 PM)

www.scaledynamics.com Gets you a phone number. That's all. [:o]



tinman -> RE: bad link (11/20/2003 2:03:26 PM)

can you take and post pics of the kit? or email them to me and i will post/host them for you...[8D]



tinman -> RE: bad link (11/20/2003 10:24:41 PM)

heres some pics that were sent to me...plane looks great...
[image]http://www.columbiaflyers.com/postpics/at6.jpg[/image]
[image]http://www.columbiaflyers.com/postpics/at61.jpg[/image]
[image]http://www.columbiaflyers.com/postpics/at62.jpg[/image]



Warjet -> RE: bad link (11/20/2003 11:26:25 PM)

Any specs like wingspan, engine recommendation, PRICE, would be helpful.



Probuilder -> RE: you AT-6 guys will love this!! check it out!!! (11/21/2003 12:05:37 AM)

Our AT-6 specs are: 83" wingspan, engine .91 to 1.20 size 4-stroke, weight 14 lbs. The kit has a Scale Airfoil and Fully Symmetrical horizontal stabilizer

For pricing you'll need to call the number listed on our website.
-Dave Page



racer-RCU -> RE: you AT-6 guys will love this!! check it out!!! (11/21/2003 2:04:04 AM)

it's just a remake of the midwest kit



BILLYFLYS -> RE: you AT-6 guys will love this!! check it out!!! (11/21/2003 6:30:04 AM)

What a class act!! I just got through driving hours to pick-up a plane that I bought from Dave, and couldn't wait to get home and post my experience.... His shop is full of award winning aircraft (museum quallity), I wanted to buy them all.... He is a very professional builder and so full of information, I couldn't believe it.... He showed me this T-6 kit that he has been designing and developing for years now and has finally completed for his customers.... The fuselage is so detailed with panel lines, rivots and is so feather light in weight, it was hard to believe that such a large plane could be made so light and look so fantastic.... Actually, the quallity of the whole kit is remarkable!! I have been in the hobby for about 30 years now, and was very impressed.... If you are lucky enough to purchase one of these fine kits you won't be disappointed....
Dave...... Thank-You for such a beautiful aircraft that I can be proud of!!
BILLY[:D]



FreddyFlyFast -> RE: you AT-6 guys will love this!! check it out!!! (11/21/2003 9:03:04 AM)

quote:

ORIGINAL: racer-RCU

it's just a remake of the midwest kit



I've built 3 Midwest AT-6 kits. I'm guessing I have about 1500 hrs. in construction on that kit alone. I've experimented with engine size, CG, building materals, finishing techniques, and plan modification. You could say I know my way around the Midwest AT-6.

After all these years I feel like I've been ripped off. Every time I open a new kit box all I get for my $240.00 is a bunch of sticks, some plastic and a set of plans. It doesn't look ANYTHING like THAT.

Besides, it says "Scale Airfoil and Fully Symmetrical Horizontal Stabilizer" Forgive me if I'm wrong, but I don't recall the box of wood having those features.

It's just my opinion, but I have to say, the guy that built the fiberglass/foam kit must have done his homework.

The full scale AT-6 has a wingspan of 42ft.,7in.
The model has a wingspan of 83in. That makes it a true 1/6 scale model.
If someone is making a 1/6 scale model, it HAS to be 83" regardless of the kit manufacturer.

To say it's a "remake" is pure ignorance.

Fast Freddy



FreddyFlyFast -> RE: you AT-6 guys will love this!! check it out!!! (12/12/2003 8:44:19 PM)

Dave,

I'm getting into the building season out here in MI. so I'm looking for another project. I'll be out in LA during the weekend of January 18th. I understand the AMA show is in Ontairo the same weekend. I'll plan to attend. Will you be there? I'd like you to put my name on one of the kits. Please let me know.

Thanks,

Fast Freddy



paperairplanes -> RE: you AT-6 guys will love this!! check it out!!! (12/12/2003 8:51:14 PM)

Sweet lookin!!!!



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.296875