where to getwhat you want (Full Version)

All Forums >> [RC Airplanes] >> Twin & Multi Engine RC Aircraft



Message

William Robison -> where to getwhat you want (8/18/2003 9:03 AM)

There is a new thread listing obscure and hard to find model making sources. See it here:

http://www.rcuniverse.com/forum/tm.asp?m=1063414

Please check it, and give us any of your favorites we can include. Help us make it useful.

Thanks.

Bill..



skypupmut -> RE: where to getwhat you want (3/21/2004 12:12 PM)

Great
thanks Bill



PILOT RD -> RE: where to getwhat you want (12/26/2005 1:19 AM)

William do you know where i can find clear windscreen mat'l that is in larger sheets like 24"x24"? Thanks.



William Robison -> RE: where to getwhat you want (12/26/2005 1:38 AM)

RD:

Not immediately, but I'd try my local sign shops. Many larger signs use thin plastic overlay covering. Also a picture frame shop. Again, many "Matt" prints are done with a protective cover layer.

After that check with Eastman Kodak's products people. Probably wont sell direct, but they could give you some outlets. Also check BASF and their Ansco division. All three of these companies make large format photographic film, at worst they might refer you to another supplier.

Bill.



PILOT RD -> RE: where to getwhat you want (12/26/2005 1:56 AM)

Bill thank you so much. RD



yl5295 -> RE: where to getwhat you want (7/11/2006 6:43 AM)

Since you guys are talking about plastic sheeting and laminates, I thought about a conversation I had recently with a 3M sales rep. 3M currently makes a plastic film for hurricane protection that you put on top of glass windows that makes them shatter proof. They have a sales video that shows a 2"x4" being shot out of an air cannon that bounces off of a window. The window cracks but stays in place and the wood bounces off of it. This is a much cheaper alternative to expensive, think hurricane proof windows.

Anyway I ran into a 3M sales rep in an airport and he told me they were coming out with a bullet proof version of a similar laminate.

We could cover airplanes with this stuff and in the event of a crash no pieces to pick up! Airplane still intact just a little limp. He told me how to find it on the 3M web site but I forgot now and have never looked. It would probably be a lot stronger that the films we use today. This stuff would probably make a very tough airplane though.



schwatd -> RE: where to getwhat you want (12/20/2006 12:53 AM)

Interesting, when I click on the link I get an access denied. Hummmmm



Temple -> RE: where to getwhat you want (1/8/2007 4:05 AM)

same here with the access denied thing
?



heli_Rod -> RE: where to getwhat you want (1/8/2007 4:45 AM)

It didn't work for me last week.[&o]

Rod



aerowoof -> RE: where to getwhat you want (4/24/2007 2:26 AM)

what's up with that,it happened to me too.



p-80 -> RE: where to getwhat you want (6/8/2007 7:17 AM)

me three



Eric Brathwaite -> RE: where to getwhat you want (6/21/2007 7:09 AM)


Hi Bill: I think you've better check that link; I was denied access also
Eric B.



bigchap -> RE: where to getwhat you want (8/12/2007 6:38 PM)

me too[&o]



Ionikios -> RE: where to getwhat you want (9/8/2007 9:11 AM)

I just got a 8UAFS 50mhz tx (haven't been around R/C for quite a few year) and am wondering where
and what is the best way to go for a rx?



69 roadrunner -> RE: where to getwhat you want (10/23/2007 6:28 AM)

looking for twin for a set of 36 nitro motors anyhelp steve



quepasa -> RE: where to getwhat you want (11/27/2007 7:42 PM)

Steve-69Roadrunner,,,I used to live in Mt.Shasta & flew @ the Montegue A/Field. We may be old Pal's! Check yer PM.
I too am looking for a suitable airframe for 2, .10s.
2, .35's oughta work on a CG Falcon with no problem tho it would be fast. A Sr. Falcon would be better as would a Telemaster for those engines from what others have said here. Q.



Eric Brathwaite -> RE: where to getwhat you want (11/27/2007 10:01 PM)

Gentlemen: I'm in search of a copy of the plans to a .60 size PICA T-28 Trojan. Can anyone of you help me? Will gladly apreciate it

Eric B.



EloyM -> RE: where to getwhat you want (3/20/2008 3:00 AM)

A T-28??? Hey Eric, that is a pretty ambitious project for a Chorillero. Eloy
eloym@dslextreme.com



jdhughen -> RE: where to getwhat you want (8/21/2008 4:07 PM)

I can't get this link to work, "access denied" . This seems like a good resource has the link been reposted some place else ?

thanks

Joel



KI8FR -> RE: where to getwhat you want (8/25/2008 7:18 PM)

Same here Does not work

Paul



79Trapper65 -> RE: where to getwhat you want (3/22/2010 11:26 PM)

Im looking for a set of plans and a short kit for a C-119 Box Car. Has anyone seen a source for these? I checked Uncle Willies. No luck.



scale only 4 me -> RE: where to getwhat you want (8/3/2010 2:45 PM)

I have one hanging in my basement,
A 90% built Eureka Models kit I picked up this spring, I don't think I have the plans though

have you seen this?
http://darehobby.com/airplanes/airplane-electric-01.htm#c119flyingboxcar

I tried this guy with no response http://www.rcgroups.com/forums/showthread.php?t=947686

Those are the only 2 kits I've seen
good luck



1/16 Scale Cat -> RE: where to getwhat you want (12/30/2010 1:26 PM)

How to wire 4 motors up to a esc... Im confused on how im gunna wire this. I have no experiance in this and its for a scratch build.

Liam



Avaiojet -> RE: where to getwhat you want (9/19/2011 4:06 PM)

"Access denied" also, but I'm used to that. [:D]



xTheWolfman -> RE: where to getwhat you want (10/3/2011 8:12 PM)


quote:

ORIGINAL: 1/16 Scale Cat

How to wire 4 motors up to a esc... Im confused on how im gunna wire this. I have no experiance in this and its for a scratch build.

Liam



I'm new also but I think you normally use one ESC per engine and they are all wired together to the RX and battery.



Page: [1] 2   next >   >>  

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2012.
0.1396484