just got my tracker II  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       


Futaba 6EX w/2.4GHz FASST System - ARF
Seller:  pickelboy
Details:   $350.00   |  11/18/2008   |  Classified Ad
We will rotate YOUR AD in this spot if you select "Forum Featured" when placing or editing your ad!

All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Polks Hobby >> just got my tracker II
Page: [1]

Login
Message << Older Topic   Newer Topic >>
just got my tracker II - 8/19/2003 9:53:42 PM   
jcole43


 

Posts: 51
Joined: 7/23/2003
From: Barnhart, MO, USA
Status: offline 		i just received my tracker II the software version is 1.30 should there be an update that i should get? also i had the battery cover open looking at the battery,it is quite hard to get the battery plugged back in when you have fatfingers but anyway as i turned the transmitter over to access the battery hatch i heard a faint rattle when i un plgged the battery and turned it up a small metal pin approximately 1/16 in diameter and 3/8 inch long fell out thought the holes in the case in the battery compartment . the system seems to be functioning properly and range checks fine should i send it in for a checkup?

_____________________________

he who dies with the most toys wins!
       Post #: 1

Broken Pin - 8/19/2003 10:08:51 PM   
lewispolk


 

Posts: 85
Joined: 3/8/2003
From: Irvington, NJ,
Status: offline 		I don't think you should fly it without having us check it out. It's probably OK, but it's worth a look see. Did you buy it from us directly?

Either way send us an e-mail with your address and we will pick it up to be looked at.

Yours truly,
Lewis Polk

(in reply to jcole43)
       Post #: 2

RE: Broken Pin - 1/10/2004 10:01:37 PM   
Eindecker_pilot



Posts: 251
Joined: 2/8/2003
From: Columbus, IN, USA
Status: offline 		What did the loose pin turn out to be? How's your Tracker II system working now?

_____________________________

http://www.bealmear.com/dawn_patrol/

(in reply to lewispolk)
       Post #: 3

RE: Broken Pin - 1/11/2004 3:46:58 AM   
lewispolk


 

Posts: 85
Joined: 3/8/2003
From: Irvington, NJ,
Status: offline 		Dear All,

The latest version of the software is 1.32 and this is a good point to upgrade. We have no reported complaints with this version and will freeze this other than future added features.

Yours truly,
Lewis Polk

(in reply to Eindecker_pilot)
       Post #: 4

RE: Broken Pin - 1/15/2004 10:42:46 PM   
Warjet


 

Posts: 209
Joined: 1/5/2002
From: El Cajon, CA, USA
Status: offline 		I sent you an email this morning, thought I would try to close the loop here also. Got the Tracker II system in a trade, claims never used by the previous owner. The software version comes up 1.29. What is the procedure for updating? If I have to send it in to you, what is the charge for upgrade and is there any charge for checking the system out while you have it? The manual has a 5/01/03 date on the cover. Thanks! Tim Spence

(in reply to lewispolk)
       Post #: 5

RE: Broken Pin - 1/16/2004 12:52:03 PM   
lewispolk


 

Posts: 85
Joined: 3/8/2003
From: Irvington, NJ,
Status: offline 		There is no charge for the upgrade to 1.32. Just get it to us and we will return it promptly. Just put a letter in to explain that you want version 1.32installed.

All the best,
Lewis Polk

(in reply to Warjet)
       Post #: 6

software version - 3/23/2004 6:15:51 PM   
imajeff


 

Posts: 2
Joined: 3/16/2004
From: Springville, UT, USA
Status: offline 		Is there a description somewhere to see how I would benefit from upgrading software from V 1.31 to 1.32 ?

(in reply to lewispolk)
       Post #: 7

RE: just got my tracker II - 3/23/2004 6:19:39 PM   
imajeff


 

Posts: 2
Joined: 3/16/2004
From: Springville, UT, USA
Status: offline 		I wonder if there is an easy fix for this...
I just got my order. I find that the Horz trim on the right stick is physically off center. That is indicated because the "beep" to show when the trim is centered, does not happen at the center (where the mechanical notch is). I have to push the trim slightly left to hear the centered "beep".

(in reply to imajeff)
       Post #: 8

RE: just got my tracker II - 3/23/2004 7:32:57 PM   
lewispolk


 

Posts: 85
Joined: 3/8/2003
From: Irvington, NJ,
Status: offline 		If the trim is mechanically off then send it to us to correct. It's impossible to determine a cause and fix without us working with it. If it's brand new then e-mail us at johng@polkshobby for a pickup by UPS.

Yours truly,
Lewis Polk

(in reply to imajeff)
       Post #: 9

Page:   [1]
All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Polks Hobby >> just got my tracker II
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.625RCU5