Servo grommets failing on Dymond D5000 & D7000    Gallery
View related threads: (in this forum | in all forums)

Logged in as Guest



Users viewing this topic: none
    Search This Thread  
 
Printable Version

All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Servo grommets failing on Dymond D5000 & D7000
Page: [1]

Tower Hobbies Get Coupon Codes Brands  
Login
Message << Older Topic   Newer Topic >>
Servo grommets failing on Dymond D5000 & D7000 - 9/4/2011 3:13 AM   
cphdrider


 

Posts: 70
Score: 101
Joined: 5/27/2010
Last Login: 2/15/2013
From: Harrisburg, NC, USA
Status: offline 		Wasn't sure where to post this blog... I have Dymond D5000 and D7000 servos and the servo mounting grommets are disintegrating after 10-20 minutes of flight time . I am using the Dymond servos in planes powered by Dle 20 and Dle 30 engines. Has anyone heard of this problem with the Dymond servos and if so what was the fix? I contacted Dymond today and was told they never heard of this before.

Hide Signatures
       Post #: 1

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/4/2011 4:42 AM   
All Day Dan


 

Posts: 2894
Score: 151
Joined: 12/15/2002
Last Login: 5/20/2013
From: MANHATTAN BEACH, CA, USA
Status: offline 		It's probably a weak servo mount structure in your fuselage that is flexing. Describe it and post some images. Are the aileron servos OK? Dan.

_____________________________

Dan

Hide Signatures

(in reply to cphdrider)
       Post #: 2

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/4/2011 2:08 PM   
cphdrider


 

Posts: 70
Score: 101
Joined: 5/27/2010
Last Login: 2/15/2013
From: Harrisburg, NC, USA
Status: offline 		Dan,   the servo mounting structure is not weak. I am having this problem with the Dymond servo mounts in the fuselage of other planes with DLE gas engines. Vibration is greater in the fuselage and likewise those grommets are disintegrating. I have used a Futaba servo next to the Dymond servo and only the Dymond grommet is coming apart. The Dymond grommet appears to be a softer material and subject to viberation damage. 10 minutes of flight and the fuselage grommets are trashed.

Does anyone know of another grommet that will fit the Dymond D5000 servos?       http://www.rc-dymond.com/

Hide Signatures

(in reply to All Day Dan)
       Post #: 3

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/4/2011 3:51 PM   
All Day Dan


 

Posts: 2894
Score: 151
Joined: 12/15/2002
Last Login: 5/20/2013
From: MANHATTAN BEACH, CA, USA
Status: offline 		Is there an eyelet in the grommet? Dan.

_____________________________

Dan

Hide Signatures

(in reply to cphdrider)
       Post #: 4

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/4/2011 5:06 PM   
cphdrider


 

Posts: 70
Score: 101
Joined: 5/27/2010
Last Login: 2/15/2013
From: Harrisburg, NC, USA
Status: offline 		Yes the same eyelet as the Futaba servos. However, the Futaba grommets will not work as they are made different. The Dymond grommet is O-ring style.

Hide Signatures

(in reply to All Day Dan)
       Post #: 5

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/4/2011 7:44 PM   
All Day Dan


 

Posts: 2894
Score: 151
Joined: 12/15/2002
Last Login: 5/20/2013
From: MANHATTAN BEACH, CA, USA
Status: offline 		What is the width of the servo and the spacing between the mounting holes? The spacing may be one centimeter which is .39 inches. That is pretty common. If you can find a Futaba servo with the same width, then the four separate grommets should work. If your servo width is the same as mine, I can send you a few to try. Dan.

_____________________________

Dan

Hide Signatures

(in reply to cphdrider)
       Post #: 6

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/4/2011 11:17 PM   
cphdrider


 

Posts: 70
Score: 101
Joined: 5/27/2010
Last Login: 2/15/2013
From: Harrisburg, NC, USA
Status: offline 		Dan,    I compared a Futaba S3003 servo hole pattern with the Dymond D5000. The holes are the same size and spacing is the same. The only difference is the Futaba servo is just a hole in the case and the Dymond D5000 is a hole with a cut out to allow the grommet to slide in. Do you have any round Futaba grommets?

Hide Signatures

(in reply to All Day Dan)
       Post #: 7

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/5/2011 1:07 AM   
All Day Dan


 

Posts: 2894
Score: 151
Joined: 12/15/2002
Last Login: 5/20/2013
From: MANHATTAN BEACH, CA, USA
Status: offline 		Futaba makes a lot a servos that are two centimeters wide with a one centimeter hole spacing. If your servo has the same dimensions, then the corner grommets should fit. They all require that slot. Go to http://towerhobbies.com/ and type in "futaba grommets". They may all fit your servo. I can send you four of the FSH 40s so you can try them. Email me your address. Dan.

_____________________________

Dan

Hide Signatures

(in reply to cphdrider)
       Post #: 8

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/10/2011 2:11 AM   
cphdrider


 

Posts: 70
Score: 101
Joined: 5/27/2010
Last Login: 2/15/2013
From: Harrisburg, NC, USA
Status: offline 		Dan,    received the grommets today and they work. Thanks much and I will order more for my Dymond D5000 servos.

Hide Signatures

(in reply to All Day Dan)
       Post #: 9

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/10/2011 3:11 AM   
All Day Dan


 

Posts: 2894
Score: 151
Joined: 12/15/2002
Last Login: 5/20/2013
From: MANHATTAN BEACH, CA, USA
Status: offline 		Thank you. Dan.

_____________________________

Dan

Hide Signatures

(in reply to cphdrider)
       Post #: 10

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/24/2012 10:16 PM   
wallace.tharp


 

Posts: 209
Score: 100
Joined: 12/2/2003
Last Login: 5/16/2013
From: Buckeye, AZ, USA
Status: offline 		I am thinking about using RC-dymond servos on my ESM P-39. Hacker 60L electric, it has 2 ea. 5000ma Turnigy Nanos in seris, 22" prop. Obviously, very little vibration here, but, can you compair them to Hi tec servos of the same basic specs? Any problems pluging into JR or Spectrum Rxs? What would you think the minimum torque should be for rud, el and al? P-39 will be about 22 lbs all up. Thanks in advance. PS, anyone else with experience with both servos welcome to comment. Wallace Tharp

< Message edited by wallace.tharp -- 9/24/2012 11:43 PM >

Hide Signatures

(in reply to All Day Dan)
       Post #: 11

RE: Servo grommets failing on Dymond D5000 & D7000 - 9/25/2012 12:45 AM   
Gizmo-RCU


 

Posts: 1418
Score: 100
Joined: 9/17/2002
Last Login: 5/20/2013
From: Athol, ID, USA
Status: offline 		After seeing this I went and checked my Giant "Big-stick". I have Dymond 5000's and a CRRC 40 cc gas engine. I hit flight 40 last week and no problems with the servos, just went and checked to make sure! Not sure what is going on but so far It hasn't hit me!
I will keep tabs however to make sure, thanks.

_____________________________

Gizmo

Hide Signatures

(in reply to wallace.tharp)
       Post #: 12

Page:   [1]
All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Servo grommets failing on Dymond D5000 & D7000
Page: [1]





Jump to:


 
Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America


0.344RCU1