RC Aerodyne 500 size Apache (Full Version)

All Forums >> [RC Helicopters] >> Scale RC Helicopters



Message

jkpape -> RC Aerodyne 500 size Apache (10/16/2011 2:00 PM)

I just ordered one of these. I couldn't pass up on the deal that they are offering right now. Has anybody on here built and/or flown one? This is my first venture into a scale heli.

Joe Pape

www.scaleflying.com

500-Size Apache Combo: Full House Helis 3D Helicopter Kit (Metal and Plastic - Gold Edition) and AH-64 Apache Fuselage (Olive Green or Desert Version) - Offer Limited to US Residents Only
Item Id: COMBO-RCA500P(FOR-APACHE5)
Retail Price: $469.95
Your Savings: $300.00
Your Price:
$169.95
Availability:
In Stock



wayne-RCU -> RE: RC Aerodyne 500 size Apache (10/19/2011 8:57 PM)

Hi: Joe

Google : Apache (500) Scale Build Guide Part 1 - SkyhunterHobby

Both the kits are about the same. and i think the build is the same. The video will help if nothing ealse.

Wayne.



jkpape -> RE: RC Aerodyne 500 size Apache (10/19/2011 9:12 PM)

Thanks Wayne, I'll check that out. The little brown truck is supposed to drop off my kit next week:-)



wayne1966 -> RE: RC Aerodyne 500 size Apache (10/22/2011 4:41 PM)

I just recieved the same kit in the desert color. Can not wait to get started!!!!!!



jkpape -> RE: RC Aerodyne 500 size Apache (10/23/2011 2:15 PM)

Wayne1966, I ordered the green one. I should have it sometime next week. This will be my first ele build. Not sure on what to get for a mtr & esc. I don't want end up buying crap, but don't want to break the bank either. What's your impression of the kit after seeing it?



wayne1966 -> RE: RC Aerodyne 500 size Apache (10/23/2011 4:51 PM)

The kit recondmends a 1200 to 1300 KV motor with a 13 or 14 pinion. This is the first scale that I have to do this mutch mods on. It's a little work but it seems not to be to complicated. The video posted on here is very good to give you a look at what is to be expected. I think it is a quailty kit. i will try to post as I go.



jkpape -> RE: RC Aerodyne 500 size Apache (10/24/2011 8:29 PM)

Mine showed up today, looks like it will be a fun build:-)



wayne1966 -> RE: RC Aerodyne 500 size Apache (10/27/2011 6:03 PM)

Have you started on it?



jkpape -> RE: RC Aerodyne 500 size Apache (10/27/2011 8:27 PM)

No, not yet. Can't decide on what to get for a mtr & esc & servos. I have both Futaba & JR radios.



Dirtee bug -> RE: RC Aerodyne 500 size Apache (11/1/2011 12:15 PM)

This kit is so tempting and I am pretty sure I am going to pull the trigger and get one. Any updates on the qualty, complexity of the kit?



wayne1966 -> RE: RC Aerodyne 500 size Apache (11/1/2011 3:23 PM)

I think this kit is very good quality. It is not to hard but you do need to pay attention to the instructions, what there is of them. There is some good video's of the same build on here that help alot. Sorry to jump in on your question but I thought I would give my two cents.



Dirtee bug -> RE: RC Aerodyne 500 size Apache (11/1/2011 4:23 PM)

Just seems like too good of a deal to pass and a nice way to get in to scale



jkpape -> RE: RC Aerodyne 500 size Apache (11/1/2011 5:29 PM)

The kit quality looks very good. I've messed with the main landing gear some. The fit (to the fuselage) is not the greatest and will require some rework. There's nothing in the instructions that covers the main landing gear installation, or how the fuselage is attached to the to the heli frame. I did find a build thread on RC Groups.



Dirtee bug -> RE: RC Aerodyne 500 size Apache (11/1/2011 6:46 PM)

I read the manual thats on scaleflying.com and it is pretty plain with nothing about installing the mechanics in the fuse. Good thing for the forums



jkpape -> RE: RC Aerodyne 500 size Apache (11/3/2011 1:49 AM)

Started working on mine today. Got the new frames installed. Went to change out the main gear with the new smaller one and found a problem. The flange one the one way brg is too large to fit in the new gear.. I'm going to have to put it in the lathe & turn it down.



wayne1966 -> RE: RC Aerodyne 500 size Apache (11/6/2011 4:37 PM)

I had the same problem but I trimmed the gear and checked with my calipers. I hope I do not end up with a vibration. It came out very close. After reading one of the other build threads the mechanics mount directly to the bottom of the fuse. I think I am going to explore a different mount.



jkpape -> RE: RC Aerodyne 500 size Apache (11/7/2011 1:53 AM)

I ended up turning the one way brg hold down .025 on the dia to fit the gear. I used a mini lathe bought from Harbor Freight. I left the main shaft cover installed in the on way brg hold & chucked up on it. (You could do the same thing by chucking it up in a drill press & use a file.) That gave me a really nice fit. I also had to drill out the mtg holes in the gear with a #40 drill bit & tap with a 3mm x 50 tap. I still need to ream out the smaller gear to 10mm dia, so that it will fit on the main shaft cover.



Dirtee bug -> RE: RC Aerodyne 500 size Apache (11/8/2011 5:02 PM)

Does it look like there is any room for fitting that fuse with a cockpit?



jkpape -> RE: RC Aerodyne 500 size Apache (11/8/2011 5:06 PM)

I haven't got that far into it yet. But, I don't think so.



jkpape -> RE: RC Aerodyne 500 size Apache (11/9/2011 10:17 PM)

FYI, they are no longer selling the 500 apachie combo at a killer price. If you didn't order one, you're out of luck.



Dirtee bug -> RE: RC Aerodyne 500 size Apache (11/14/2011 4:22 PM)

Damn I knew I should have jumped on one



wayne1966 -> RE: RC Aerodyne 500 size Apache (11/18/2011 3:52 AM)

How is the build going? I programed my ESC and TX and almost ready to test the mechanics. I have been doing some painting on the fuse, I am not that good but it will make it mine.



jkpape -> RE: RC Aerodyne 500 size Apache (11/18/2011 5:26 PM)

I'm on hold til I can get a mtr, esc, servos & gyro



wayne1966 -> RE: RC Aerodyne 500 size Apache (11/20/2011 1:27 AM)

Do you know what mtr,esc you plane to use yet?



jkpape -> RE: RC Aerodyne 500 size Apache (11/20/2011 1:46 PM)

Not yet. I don't want to break the bank or end up buying crap.



Page: [1] 2 3 4 5 6 7   next >   >>  

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.
0.390625