default needle settings on nitro motor shockwave rc

default needle settings on nitro motor shockwave rc (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> Redcat Racing Support

Message

deon99 -> default needle settings on nitro motor shockwave rc (12/26/2011 10:45 PM)
Hi does any one know the high speed and low speed default needle settings. on the nitro motor in a shockwave rc

nitrosportsandrunner -> RE: default needle settings on nitro motor shockwave rc (12/27/2011 1:15 AM)
try 4 turns out on the high-speed. 3 out on the low. 2mm opening on the idle gap. That should be good enough to get it started. also, pre heat the motor with a hair dryer to make it easier to start if its a new motor.

codokas -> RE: default needle settings on nitro motor shockwave rc (12/27/2011 2:11 AM)
2 1/2 out on high and screw flush with collar on the low DOUG quote: ORIGINAL: deon99 Hi does any one know the high speed and low speed default needle settings. on the nitro motor in a shockwave rc

nitrosportsandrunner -> RE: default needle settings on nitro motor shockwave rc (12/27/2011 2:24 AM)
quote: ORIGINAL: codokas 2 1/2 out on high and screw flush with collar on the low DOUG quote: ORIGINAL: deon99 Hi does any one know the high speed and low speed default needle settings. on the nitro motor in a shockwave rc that sounds like the settings once the motor is broken in. out of the box it needs to be very rich for breaking in the motor.

codokas -> RE: default needle settings on nitro motor shockwave rc (12/27/2011 2:38 PM)
Correct you are.For breaking in ya gotta run it rich DOUG quote]ORIGINAL: nitrosportsandrunner quote: ORIGINAL: codokas 2 1/2 out on high and screw flush with collar on the low DOUG quote: ORIGINAL: deon99 Hi does any one know the high speed and low speed default needle settings. on the nitro motor in a shockwave rc that sounds like the settings once the motor is broken in. out of the box it needs to be very rich for breaking in the motor.

Page: [1]

SITE MAP! : : FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

0.140625