where to make or buy an Anti Vibration Cam mount? (Full Version)

All Forums >> [RC Airplanes] >> FPV, UAV''s & Drones

Message

---

blhollo2 -> where to make or buy an Anti Vibration Cam mount? (1/18/2012 5:40 AM) Hey all I'm trying to figure out a way to get some non-shaky footage out of my flycamoneHD, I strap it to my nitro airplanes and the engines produce vibration. I know electric is a better way for video footage...but does anyone know of a mount tat will do this or how i can build a mount? any advice and pics and links would be greatly appreciated!!! Here is some video footage i took with the flycamHD camera and notice the vibration =( Hanger 9 Toledo special

---

cmoulder -> RE: where to make or buy an Anti Vibration Cam mount? (1/18/2012 12:23 PM) I made a similar quest a few years ago but never found the Holy Grail of anti-vibration for our small models. The rock-steady video obtained by full-scale news helicopters, etc, is stabilized by very expensive and heavy gyro units and optical stabilizers in the camera. Even with electric models you will get some vibration. Vibration appears to be less if you use a wide-angle lens. Here is some video made with my electric aerial platform.

---

eagle1945 -> RE: where to make or buy an Anti Vibration Cam mount? (1/18/2012 5:35 PM) A suggestion and answer might be something simular to the steady cam device used by TV camera men.  It's a spring return omni directional mount. It absorbs sudden movement and vibration.

---

blhollo2 -> RE: where to make or buy an Anti Vibration Cam mount? (1/18/2012 11:32 PM) ok but im looking for one for my rc airplanes

---

skullman -> RE: where to make or buy an Anti Vibration Cam mount? (2/7/2012 5:20 AM) blhollo2, You will likely have to buld your own. I would suggest you use soft "jelly" mounts and fit them into your system. You might want to try using two sets of mounts...one set on the end of the mount where it mounts to the plane and another set where the camera mounts to the bracket. link to gel mounts http://www.vibrationmounts.com/RFQ/VM110104.htm#Middle

---

skullman -> RE: where to make or buy an Anti Vibration Cam mount? (2/7/2012 6:15 AM) http://diydrones.com/forum/topics/blurry-photos?commentId=705844%3AComment%3A739781 Here's anouther source to check out.

---

skullman -> RE: where to make or buy an Anti Vibration Cam mount? (2/7/2012 6:25 AM) here are some heli mounts that may offer ideas....you can see the gel mounts http://www.draganfly.com/uav-helicopter/draganflyer-x6/features/anti-vibration-camera-mount.php

---

rcaddict@kewanna.in -> RE: where to make or buy an Anti Vibration Cam mount? (2/12/2012 12:22 AM) Try a GoPro Hero...the Hero 2 just came out and the Hero1s are a good price. I mounted mine on the top wing over the CG on an Ultimate 300-10. It runs an OS 1.20 AX. Here is a link to see the pland and videos http://www.matoonline.com/firstPersonViewVideos.htm

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

0.203125