5945 servo problem  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       



All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service >> 5945 servo problem Page: [1]

Login
Message << Older Topic   Newer Topic >>
5945 servo problem - 4/19/2002 5:42:17 AM   
R Plante


 

Posts: 93
Joined: 3/23/2002
From: Stettler, AB, CANADA
Status: offline 		Hi Mike

A flier in my club just purchased 6 5945 servos on 1 of them when he plugged it into the elevator slot on his rx the plastic plug by the black wire melted a little . It still works but he is wondering what caused it. He was going to call the lhs where he bought them but I said I would post here first . We tried all the other servos with no problems (same slot on rx).Futaba 149dp rx with no history of problems.

Should he send it in for service or try his lhsfor a replacement.

He is just in the process of setting up an Aerowerks Extra and this will set him back a bit and he was wondering what the quickest way to resolve this is.

Thanks
Randy
       Post #: 1

5945 servo problem - 4/19/2002 7:17:34 AM   
Vince


 

Posts: 1650
Joined: 2/2/2002
From: Nederland, Tx.
Status: offline 		Most definatly take it back to the LHS, unless he has had it for some time.

Vince

(in reply to R Plante)
       Post #: 2

5945 servo problem - 4/19/2002 8:44:36 PM   
MikeMayberry



Posts: 2822
Joined: 1/15/2002
From: Poway, CA, USA
Status: offline 		Randy- Melting the plug would indicate considerable current draw to produce that much heat. Have him call our service manager Tony Ohm @ (858)748-6948 x308 and he will figure out the best way to handle the situation. The hobby shop is not responsible for any warranty issues.

Mike.

(in reply to R Plante)
       Post #: 3

Page:   [1]
All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service >> 5945 servo problem
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.313RCU1