Insane 1/5 scales with Big Blocks in them!! (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> RC Giant Scale Cars



Message

nitrohead5300 -> Insane 1/5 scales with Big Blocks in them!! (4/22/2012 2:48 PM)

The purpose of this thread is to talk about big block motors in 1/5 scale cars. I consider inline twins or any motor larger than 27cc as a big block. If you have a 1/5 scale with a big block in it would you share how you set it up what kind of tires you are using , what type of motor and post some pictures if you have any?



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/22/2012 2:55 PM)

Here is a picture of my MCD, 1/5 scale. My wife said if I behave I might get a big block for my birthday[:D] http://i711.photobucket.com/albums/ww119/nitroheadjones/029.jpg



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/22/2012 3:11 PM)

Has anybody here ever put disc brakes on the front end of a MCD like this gentleman?? I want to do something like that need some pointers.



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/22/2012 3:22 PM)

I found this picure of a inline twin in a MCD. So I know a twin will fit in a MCD. This is what I want to do to my MCD.



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/22/2012 3:32 PM)

here is a picture of a FG with a BZM big block in it I think this prototype belongs to Maxit. He went 117mph with a 50cc BZM in a Baja.



Rallyfinnen -> RE: Insane 1/5 scales with Big Blocks in them!! (4/22/2012 4:41 PM)

nitrohead5300:

That's my rally on the first picture there. I did not get the braking performance I hoped for, so I have now mounted hydrulic brakes on it. Still waiting for a guy to cut custom epoxy brake disc's in a water jet though..

Here is my build thread, I think the pictures will tell you more:

http://www.rcbash.se/forum/viewtopic.php?f=64&t=1661&start=285



proanti1 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/22/2012 7:45 PM)

$1000 for that BZM mini moto engine... ridiculous.



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/22/2012 7:49 PM)


quote:

ORIGINAL: Rallyfinnen

nitrohead5300:

That's my rally on the first picture there. I did not get the braking performance I hoped for, so I have now mounted hydrulic brakes on it. Still waiting for a guy to cut custom epoxy brake disc's in a water jet though..

Here is my build thread, I think the pictures will tell you more:

http://www.rcbash.se/forum/viewtopic.php?f=64&t=1661&start=285


Thank you Rallyfinnen for the link on the brakes!!! I am going to read the whole thread and study the pictures.



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/22/2012 7:51 PM)


quote:

ORIGINAL: proanti1

$1000 for that BZM mini moto engine... ridiculous.

Don't know what brand it will be just that it will be a big block [:D]



badboy2 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/23/2012 12:08 AM)

i have 1 baja with esp 4bolt 29.5 with hostile tires 19/55 gears.1 baja has dog pile racing 29.5 4bolt with 2speed..1 is esp 30.5 2bolt 19/55 gears.nutech has 29cc.



speedypetey61 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/23/2012 7:44 AM)

quote:

ORIGINAL: nitrohead5300

I found this picure of a inline twin in a MCD. So I know a twin will fit in a MCD. This is what I want to do to my MCD.



id question this, the motor is not mounted in the MCD, it's just laying next to it??? actually it is mounted with HPI baja rear section and clutch housing, I doubt this ever went into that MCD...

As for the FG with the BZM 50, do you have anymore pictures of it? would like to see the other side..

I am in the process of completing a fg 4wd baja competition with inline twin 57cc and dual VRC pipes, will get some pics as I complete the project.

Thanks



bbuzzard -> RE: Insane 1/5 scales with Big Blocks in them!! (4/23/2012 12:48 PM)


quote:

ORIGINAL: speedypetey61

id question this, the motor is not mounted in the MCD, it's just laying next to it??? actually it is mounted with HPI baja rear section and clutch housing, I doubt this ever went into that MCD...



+1

I don't think a twin will fit and if it was mounted it would be offset too much...




nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/23/2012 2:38 PM)

quote:

ORIGINAL: speedypetey61

quote:

ORIGINAL: nitrohead5300

I found this picure of a inline twin in a MCD. So I know a twin will fit in a MCD. This is what I want to do to my MCD.



id question this, the motor is not mounted in the MCD, it's just laying next to it??? actually it is mounted with HPI baja rear section and clutch housing, I doubt this ever went into that MCD...

As for the FG with the BZM 50, do you have anymore pictures of it? would like to see the other side..

I am in the process of completing a fg 4wd baja competition with inline twin 57cc and dual VRC pipes, will get some pics as I complete the project.

Thanks

OOPS!! I posted the wrong file My computer crashed and I lost the best pictures of this project I did see a video of this Mcd running with a twin in it . I know for a fact that a twin can fit in a MCD a guy up at largescale put one in a MCD before he completed the project a customer purchased the car.[:D] Here is a picture of another twin in a MCD.



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/23/2012 2:40 PM)

quote:

ORIGINAL: bbuzzard


quote:

ORIGINAL: speedypetey61

id question this, the motor is not mounted in the MCD, it's just laying next to it??? actually it is mounted with HPI baja rear section and clutch housing, I doubt this ever went into that MCD...



+1

I don't think a twin will fit and if it was mounted it would be offset too much...



I am pretty sure it will fit and if it does not I will just put the motor in another car no big deal.[:D]



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/23/2012 3:06 PM)


quote:

ORIGINAL: badboy2

i have 1 baja with esp 4bolt 29.5 with hostile tires 19/55 gears.1 baja has dog pile racing 29.5 4bolt with 2speed..1 is esp 30.5 2bolt 19/55 gears.nutech has 29cc.

I bet that 2 speed is fast!! Do you have any pictures of it ??



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/23/2012 4:20 PM)


quote:

ORIGINAL: speedypetey61

quote:

ORIGINAL: nitrohead5300

I found this picure of a inline twin in a MCD. So I know a twin will fit in a MCD. This is what I want to do to my MCD.



id question this, the motor is not mounted in the MCD, it's just laying next to it??? actually it is mounted with HPI baja rear section and clutch housing, I doubt this ever went into that MCD...

As for the FG with the BZM 50, do you have anymore pictures of it? would like to see the other side..

I am in the process of completing a fg 4wd baja competition with inline twin 57cc and dual VRC pipes, will get some pics as I complete the project.

Thanks

Thank you looking forward to those pictures



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (4/30/2012 7:02 PM)

[:D] I wonder how long it will be before some one puts a 125cc shifter cart motor and tranny in a largescale landspeed attemp vehicle.



quarterscalelegends -> RE: Insane 1/5 scales with Big Blocks in them!! (5/1/2012 12:58 AM)

like this?

[image]http://www.quarterscalelegends.com/bb/download/file.php?id=5344[/image]



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (5/1/2012 2:40 PM)

Nice!!![:D] Got anymore pictures??



quarterscalelegends -> RE: Insane 1/5 scales with Big Blocks in them!! (5/1/2012 10:56 PM)

Bunch of pics here... http://www.quarterscalelegends.com/bb/viewtopic.php?f=9&t=2152&hilit=degree+mt

[image]http://www.quarterscalelegends.com/bb/download/file.php?id=5342[/image]



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (5/2/2012 1:05 AM)

Thanks for the post.



KENDOG689 -> RE: Insane 1/5 scales with Big Blocks in them!! (5/2/2012 1:23 AM)

Thats a Yamaha kt 100 motor,not a shifter motor.It was posted on another site.



speedypetey61 -> RE: Insane 1/5 scales with Big Blocks in them!! (5/2/2012 2:44 AM)

That is the coolest monster truck ever.



nitrohead5300 -> RE: Insane 1/5 scales with Big Blocks in them!! (5/2/2012 12:57 PM)

quote:

ORIGINAL: KENDOG689

Thats a Yamaha kt 100 motor,not a shifter motor.It was posted on another site.

Thats cool no big deal. He did not say it was a shifter cart motor anyway. From the angle of ther shot I can't tell what it is.[:D] But a nice looking truck.[:D]



quarterscalelegends -> RE: Insane 1/5 scales with Big Blocks in them!! (5/3/2012 1:16 AM)

one day i plan to take over the world with that monster! :) LOL. I always have to laugh when i look at this thing, its funny as hell. Its just too over the top.[:)]



Page: [1] 2 3 4 5 6 7 8 9   next >   >>  

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.
0.3271484