Sail Servos    Gallery
View related threads: (in this forum | in all forums)

Logged in as Guest



Users viewing this topic: none
    Search This Thread  
 
Printable Version



All Forums >> RC Boats >> RC Sailboats >> Sail Servos Page: [1]

Tower Hobbies Get Coupon Codes Brands  
Login
Message << Older Topic   Newer Topic >>
Sail Servos - 6/25/2012 9:39 PM   
c3opti


 

Posts: 4
Score: 100
Joined: 6/25/2012
Last Login: 8/15/2012
From: , VA, USA
Status: offline 		 I have a basic question but I am very confused on it so any help is appreciated.  Basically I am building a volvo open 70 model and I need a sail servo with torque of about 20 kg-cm and it must be reasonably priced.  I was thinking the HS-815BB but if it only has 140 degrees of rotation how will it trim in the sail all the way or am I missing something?  What is the difference between sail arms and winches, how much rotation do I need from either I winch or arm to fully trim the sail? Any help/ references is greatly appreciated.

Hide Signatures
       Post #: 1

RE: Sail Servos - 6/26/2012 3:54 PM   
c3opti


 

Posts: 4
Score: 100
Joined: 6/25/2012
Last Login: 8/15/2012
From: , VA, USA
Status: offline 		PLEASE HELP! 

Hide Signatures

(in reply to c3opti)
       Post #: 2

RE: Sail Servos - 6/27/2012 9:26 AM   
Islander51


 

Posts: 52
Score: 105
Joined: 2/6/2008
Last Login: 5/24/2013
From: Jersey, C.I. UK, , UNITED KINGDOM
Status: offline 		Look in the R/C section here:

http://www.onemetre.net/Build/Build.htm

This site has the information you need. Also

http://www.theamya.org/hints/sailservo.php and

http://www.theamya.org/boats/us1m/us1mcons.php

These sites are for the IOM and the US1M, but the basics are the same for all fractional rig yachts.
You double the sheet travel by adding a pulley to the end of an arm,attaching the end of the sheet to the boat, but lose some torque.

You don't say what size your boat is, but if you measure from the sheeting post to the mast,take that out sideways,then measure from that point back to the sheeting post;
this is the amount of sheeting travel you need.

Have a look here at the build logs, the ones by Claudio always have plenty of Pics.

http://www.rcsailing.net/forum1/forumdisplay.php?81-America-s-Cup-Boats

Edward.





Hide Signatures

(in reply to c3opti)
       Post #: 3

RE: Sail Servos - 8/15/2012 9:15 PM   
Captain MacGyver


 

Posts: 1
Score: 100
Joined: 8/15/2012
Last Login: 10/24/2012
From: Marro Bay, CA, USA
Status: offline 		    Hi Captain MacGyver here,
   A servo is around 140 degrees of swing. The winch on my Sanibel turns 360 degrees 3and 3/4 times stop to stop. I hope this helps you. 
    I live on a 43 ft. Sail boat in the center of Morro Bay I have posted a few of my Boat on you tube they have a GoPro camera on them.
To see these videos go to YouTube and type in  W6FOG  (this is my ham call sign)

Hide Signatures

(in reply to c3opti)
       Post #: 4

RE: Sail Servos - 8/16/2012 3:51 PM   
boomer1


 

Posts: 71
Score: 100
Joined: 3/14/2011
Last Login: 5/18/2013
From: Temecula, CA, USA
Status: offline 		These sites can be of value in your research: http://www.servodatabase.com/ and http://www.servocity.com/html/servos___accessories.html
Servo City can help you select a good servo for your boat. Worth a few minutest to check out these sites.

On a personal note, setting up a winch system correctly requires knowledge. Setting up a sail servo using a servo arm requires less engineering and is much easier. There are many very popular rc sailboats using winch set ups, my point is when done correctly they work great.

There are many boat sold using a single double track drum set up, but those are not true winch systems - I posted  photos of DENNIS DESPROIS' Gambit  (one of the finest rc racing yachts ever build) with a properly set up winch system. Hope this provides you with an idea of what is involved.

Dennis is a well know RC sail maker and boat builder (and Champion sailor.) http://www.ddesprois-rc-boats.com/Site/contact.html
I am sure he'd be happy to give you some insights on your project.
Boomer

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize


< Message edited by boomer1 -- 8/16/2012 7:28 PM >

Hide Signatures

(in reply to c3opti)
       Post #: 5

RE: Sail Servos - 8/22/2012 6:02 AM   
mainiac68


 

Posts: 43
Score: 100
Joined: 4/2/2010
Last Login: 5/12/2013
From: North Port, FL, USA
Status: offline 		Did you get your problem solved? The 815BB should have all the power you need. 140degrees may be enough depending on how long your sail winch servo arm is/ how much haul you need/ and if you use single or double purchase method of hauling sheets(lines). A simpler solution if you need 180 degrees of travel is to buy a servo stretcher ($20 at ServoCity) 
  http://www.servocity.com/html/hs-815bb_mega_sail_arm.html

http://www.servocity.com/html/180o_servo_stretcher.html
Hope this helps.

Hide Signatures

(in reply to boomer1)
       Post #: 6

Page:   [1]
All Forums >> RC Boats >> RC Sailboats >> Sail Servos
Page: [1]





Jump to:


 
Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America


0.281RCU1