Stock needle settings for Tornado Engine (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> Redcat Racing Support



Message

JohnP2 -> Stock needle settings for Tornado Engine (9/1/2012 4:02 AM)

See this post. I think it is an SH .18. Many thanks!



micah11 -> RE: Stock needle settings for Tornado Engine (9/1/2012 4:32 AM)

The stock needle settings are 2.5-3 turns out from fully closed on the high and low speed needles. the idle screw should be set so the carb is open about 1mm. Hope this helps



JohnP2 -> RE: Stock needle settings for Tornado Engine (9/1/2012 5:37 AM)


quote:

ORIGINAL: micah11

The stock needle settings are 2.5-3 turns out from fully closed on the high and low speed needles. the idle screw should be set so the carb is open about 1mm. Hope this helps

This helps tremendously. Thank you so much!



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.
9.326172E-02