RE: Moki 180 Fuel problems    Gallery
View related threads: (in this forum | in all forums)

Logged in as Guest



Users viewing this topic: none
    Search This Thread  
 
Printable Version


TurboHeader Muffler
Seller:  RC Specialties
Details:   $69.95   |  4/28/2013   |  Classified Ad
We will rotate YOUR AD in this spot if you select "Forum Featured" when placing or editing your ad!

All Forums >> Glow Engines, Gas Engines, Fuel & Mfg Support Forums >> Glow Engines >> RE: Moki 180 Fuel problems
Page: <<   < prev  1 [2]

Tower Hobbies Get Coupon Codes Brands  
Login
Message << Older Topic   Newer Topic >>
RE: Moki 180 Fuel problems - 10/1/2012 4:19 PM   
FLAPHappy


 

Posts: 438
Score: 122
Joined: 12/24/2007
Last Login: 5/18/2013
From: LaPine, OR, USA
Status: offline 		Capt: The exhaust ports are open so the sleeve has to be in the right position. I don't think the sleeve can be put in backwards, they usually have the notches to line up on the head and sleeve.
Paul 

Hide Signatures

(in reply to captinjohn)
       Post #: 26

RE: Moki 180 Fuel problems - 10/1/2012 4:36 PM   
SRQFlyer



Posts: 79
Score: 100
Joined: 9/25/2002
Last Login: 5/19/2013
From: Sarasota, FL, USA
Status: offline 		Paul,

Looks like your spraybar is OK. I will be going flying Tuesday (weather permitting) and will test my theory with all the different carbs & pieces in the plane. I'll report back Wednesday.
Jim

Weather poor today. I'll try Friday and will report what I find.

< Message edited by SRQFlyer -- 10/2/2012 7:04 PM >

_____________________________

AMA 106594, CG Ult 10-300 Bro #38, Club Saito #699 (45, 50, 56, 2x72, 82, 91, 120, 2x 150)

Hide Signatures

(in reply to FLAPHappy)
       Post #: 27

RE: Moki 180 Fuel problems - 10/6/2012 3:37 AM   
SRQFlyer



Posts: 79
Score: 100
Joined: 9/25/2002
Last Login: 5/19/2013
From: Sarasota, FL, USA
Status: offline 		Test flew the Extra with the 2.10 with the good spraybar today - worked just fine. The engine won't run with the leaky spraybar. I'll do some high magnification inspection of the suspect one tomorrow. Maybe there is a crack or split that isn't real obvious.

Jim

_____________________________

AMA 106594, CG Ult 10-300 Bro #38, Club Saito #699 (45, 50, 56, 2x72, 82, 91, 120, 2x 150)

Hide Signatures

(in reply to SRQFlyer)
       Post #: 28

RE: Moki 180 Fuel problems - 10/7/2012 10:49 PM   
FLAPHappy


 

Posts: 438
Score: 122
Joined: 12/24/2007
Last Login: 5/18/2013
From: LaPine, OR, USA
Status: offline 		Jim:
I replaced the Moki 180 with a different one, used the Slimline Pitts/W Smoke . Same muffler as I had on the origional engine, opened the main needle valve 4 turns open, and turned the remote valve 2 turns open. Primed the carb, it ran fine at idle and good transition at full throttle.
It peaked out at 8600 RPM with an 18/8 M.A. prop. I let it idle for about 5 minutes at 2500, then ran it WOT, it operated perfectly.
So every thing I did, with the fuel lines, etc, was ok, The origional engine I sent to Bill is still in the shop, I have not heard from him yet.
It had to be something simple, bad "O" ring on the low end disk.?  I could not get it off, that's why I sent it back to him.I will post when I find out what he found. There was no need to install a Perry pump, Cline, or close off the tubes on the muffler. It runs like it should without doing all of that
Paul

Hide Signatures

(in reply to SRQFlyer)
       Post #: 29

RE: Moki 180 Fuel problems - 10/8/2012 1:11 PM   
SRQFlyer



Posts: 79
Score: 100
Joined: 9/25/2002
Last Login: 5/19/2013
From: Sarasota, FL, USA
Status: offline 		Paul,
I agree 100% about regulators, pumps, pinching exhaust tubes - they run just fine "as-is"! I'm glad you got your setup working. Let us know what Bill finds. I suspect that maybe your low speed disk o-rings were stuck or disintegrated. They get very hard and fragile after a long time. So do the ones in a Perry carb (ask how I know).
I also had re-done my tank and changed all the o-rings in the carb for new ones, but no luck until I changed the carb. This past Friday my 2.10 worked perfectly, so I also know that my tank, etc is fine. I had intended to take off the cowl and change just the spraybar to prove my idea, but it started raining. That will be the test next time I take the Extra out - maybe the 16th.
Jim


_____________________________

AMA 106594, CG Ult 10-300 Bro #38, Club Saito #699 (45, 50, 56, 2x72, 82, 91, 120, 2x 150)

Hide Signatures

(in reply to FLAPHappy)
       Post #: 30

RE: Moki 180 Fuel problems - 10/12/2012 11:40 PM   
FLAPHappy


 

Posts: 438
Score: 122
Joined: 12/24/2007
Last Login: 5/18/2013
From: LaPine, OR, USA
Status: offline 		Jim:
I finally received an answer on the problem from Bill Jensen. " Found debris in the Carb inlet Banjo fitting and throttle barrel between the Cat's Eye and Fuel Delivery nozzle.????
Before I sent it back, I sprayed carb cleaner through the entire carb, then pumped fuel thru it... . How in the world could they find dirt after all of that??? Anyway, the charge for labor was $127.00 including shipping. Bill said they lost their shirt on this repair, it took him 14 hours, but only charged me for 4 hours labor.
I can't beleive this!!!, hell, the engine is not worth $490.00 charging $35.00 an hour for labor. and charging $127.00 , he was giving me a break??? Well, I paid him, but that's it from now on. That's the last time I'll get taken for a ride on engine repairs. If I can't fix it, it's a boat anchor period.
Paul

Hide Signatures

(in reply to SRQFlyer)
       Post #: 31

RE: Moki 180 Fuel problems - 10/13/2012 4:11 AM   
SRQFlyer



Posts: 79
Score: 100
Joined: 9/25/2002
Last Login: 5/19/2013
From: Sarasota, FL, USA
Status: offline 		Paul,
Ouch! That's awfully steep, even at the "reduced" rate. I've overhauled and repaired several hundred engines for myself and the guys here in Sarasota. I usually only charge parts at cost plus a FEW dollars ($5-$15) labor. If I do something wrong or slowly, then it's to my account. Of course, I'm not trying to make a living at it and $35.00 per hour isn't really very high nowadays, but -14 hours??
Oh well, live and learn. Thanks for the info!
Jim

_____________________________

AMA 106594, CG Ult 10-300 Bro #38, Club Saito #699 (45, 50, 56, 2x72, 82, 91, 120, 2x 150)

Hide Signatures

(in reply to FLAPHappy)
       Post #: 32

RE: Moki 180 Fuel problems - 10/18/2012 4:11 PM   
JeffH


 

Posts: 1872
Score: 114
Joined: 1/17/2002
Last Login: 5/17/2013
From: Carrollton, VA, USA
Status: offline 		Seems like they need some more efficient diagnostic techniques. If you suspect carb issues, then install known good one and test. If its fixed, then you know where the problem is located. Rebuild, clean, and test. Heck, there is only a few parts in a carb. How could you possibly spend 14 hours on any 2 stroke??
If it wasn't fixed with carb, call customer to get the go ahead to investigate further before spending $35.00 times X hours!!!

Hide Signatures

(in reply to SRQFlyer)
       Post #: 33

Page:   <<   < prev  1 [2]
All Forums >> Glow Engines, Gas Engines, Fuel &amp; Mfg Support Forums >> Glow Engines >> RE: Moki 180 Fuel problems
Page: <<   < prev  1 [2]





Jump to:


 
Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America


0.422RCU1