Suggestions. (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> Redcat Racing Support



Message

Redcatlover -> Suggestions. (9/30/2012 10:01 AM)

I have the caldera 10e. i do short course racing. i broke a couple arms,shocks,ect ect spent 100+ on parts. I should just throw out this idea for redcat. maybe they should consider having aluminum upgrade parts,chassis,hub carriers,shock towers,arms, ect like hpi has for their trucks. wouldnt be a bad idea really. comment below what you think :)

thanks,bob



Dads like rc too -> RE: Suggestions. (9/30/2012 1:53 PM)


quote:

ORIGINAL: Redcatlover

I have the caldera 10e. i do short course racing. i broke a couple arms,shocks,ect ect spent 100+ on parts. I should just throw out this idea for redcat. maybe they should consider having aluminum upgrade parts,chassis,hub carriers,shock towers,arms, ect like hpi has for their trucks. wouldnt be a bad idea really. comment below what you think :)

thanks,bob

What kind of suggestions are you looking for? It should have never cost that much for some replacement parts. Aluminum parts are for show mostly, they're heavier and bend. The Caldera 10e is a tough truck. Besides the brass pinion and front knuckles needing to be upgraded, it holds up well. These trucks aren't indestructible. They often have more power then they can handle and in turn need the operator to control them from ripping themselves apart.



carslover -> RE: Suggestions. (10/1/2012 3:46 PM)

i completely agree with dads, i have used aluminum parts in the past and they get messed up a lot easier than plastic parts, like he said they are for show!



nitrosportsandrunner -> RE: Suggestions. (10/2/2012 12:23 AM)


quote:

ORIGINAL: Redcatlover

I have the caldera 10e. i do short course racing. i broke a couple arms,shocks,ect ect spent 100+ on parts. I should just throw out this idea for redcat. maybe they should consider having aluminum upgrade parts,chassis,hub carriers,shock towers,arms, ect like hpi has for their trucks. wouldnt be a bad idea really. comment below what you think :)

thanks,bob

Redcat doesnt have alloy arms, but they do have alloy shock towers. These will flex less than the stock ones and thus help keep the shocks from bending.
The hub carries, front and rear are availible in alloy as well. There is also a alloy upgrade steering drag link, front and rear suspension mount and also anti roll bars.

http://www.redcatracing.com/Search-2012?a891=CALDERA+10E&a254=Hop+Ups&a845=&a293=&a277=&a922=&a146=1&a386=pi



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.
1.515625