Upgraded clutch system (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> [RC Car Engines] >> Car Nitro & Gas Engines



Message


JohnP2 -> Upgraded clutch system (10/1/2012 2:22 AM)

I recently upgraded my stock, two-shoe, clutch on my Losi 810 with a three-shoe M2C clutch system. Every now and then I'll make an upgrade where I don't notice a tangible difference....but not in this case. WOW! The pop on this car now is amazing after this upgrade. It's like a little Whippet out on the road. I kept it a little stiff, going with 1.1mm springs (due to the fact I just bash with this csr)....and am now intrigued what the .9 mm springs will offer.

For those that have a two-shoe clutch, I'd definitely recommend looking for a 3-shoe available for your model. I was more than happy with the two-shoe, but wanted to try an upgrade. After I blew out the spring on the stock clutch, I made the switch.

I never thought it would make that much of a difference, but I was dead wrong - it's amazing!. Special thanks to Proanti for the recommendation on this. I hope this helps anyone considering an upgrade.




Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.
0.34375