Hacker Q80 14xs + CC HV80 doesn't work    Gallery
View related threads: (in this forum | in all forums)

Logged in as Guest



Users viewing this topic: none
    Search This Thread  
 
Printable Version

All Forums >> Electric Aircraft Universe >> Electric Pattern Aircraft >> Hacker Q80 14xs + CC HV80 doesn't work
Page: [1]

Tower Hobbies Get Coupon Codes Brands  
Login
Message << Older Topic   Newer Topic >>
Hacker Q80 14xs + CC HV80 doesn't work - 10/31/2012 10:53 AM   
hou_zhenyu


 

Posts: 14
Score: 100
Joined: 11/25/2010
Last Login: 5/20/2013
From: BeiJing, CHINA
Status: offline 		 Hi, 

Has anybody used the combination Hacker Q80 14XS and CC HV80 V2.

I tried this with almost all the setting, timing from 0 to 9, set PWM to 8, 16, "out-runner mode", the motor is either out-of-step or have a very low RPM, no more than 5300 with a Falcon 20.5x14.5. We tried another CC HV80 V2, which works great for an in-runner, and have the same problem. Then we tried a Master Spin 99 and the motor works fine, rpm is 6100.

Does anybody use the combination, could you share your settings? Or, the CC HV80 V2 just cannot support Q80 (too many poles?) 

Regards,
Zhenyu Hou


Hide Signatures
       Post #: 1

RE: Hacker Q80 14xs + CC HV80 doesn't work - 10/31/2012 12:09 PM   
mups53


 

Posts: 1938
Score: 105
Joined: 1/15/2002
Last Login: 5/20/2013
From: Hoffman Estates, IL, USA
Status: online 		 We have customers using that combo with no problems. Last year I had 2 of the Q80 11S's and they ran fine on the CCHV80 Ice ESC. Mike


_____________________________

F3AUnlimited Customer Service
1 800 591 2875

Hide Signatures

(in reply to hou_zhenyu)
       Post #: 2

RE: Hacker Q80 14xs + CC HV80 doesn't work - 10/31/2012 2:46 PM   
patternflyer1



Posts: 1986
Score: 100
Joined: 7/3/2003
Last Login: 5/20/2013
From: Tracy, CA, USA
Status: offline 		Did you set your end points for throttle properly?

Chris


_____________________________

Team BJ Craft Team F3A Unlimited
Team Airtronics

Hide Signatures

(in reply to hou_zhenyu)
       Post #: 3

RE: Hacker Q80 14xs + CC HV80 doesn't work - 10/31/2012 3:06 PM   
BHolsten


 

Posts: 873
Score: 100
Joined: 3/28/2007
Last Login: 5/19/2013
From: Fayetteville, NC, USA
Status: offline 		This is the link that was shared with me and it worked great! I am running a Hacker A60-7S-V2-28 pole motor and initially I could not get more than 5700 RPM's. I changed the setting and now I am up to 6340RPM swinging an APC 20.5x14 on old three year old packs.


Here is the link that was shared with me from F3A Unlimited.

http://www.f3aunlimited.com/webstore/index.php?main_page=page&id=13



Bill

Hide Signatures

(in reply to hou_zhenyu)
       Post #: 4

RE: Hacker Q80 14xs + CC HV80 doesn't work - 11/1/2012 4:42 AM   
hou_zhenyu


 

Posts: 14
Score: 100
Joined: 11/25/2010
Last Login: 5/20/2013
From: BeiJing, CHINA
Status: offline
quote:

ORIGINAL: mups53

 We have customers using that combo with no problems. Last year I had 2 of the Q80 11S's and they ran fine on the CCHV80 Ice ESC. Mike

Hi, Mike

Are the customers using the exact same combo, Q80 14xs + CCHV80 Ice? If yes,  can you help to share the settings? Especially the timing, the PWM, startup power and Throttle response. And what's the propeller and RPM?

Regards,
Zhenyu



< Message edited by hou_zhenyu -- 11/1/2012 6:00 AM >

Hide Signatures

(in reply to mups53)
       Post #: 5

RE: Hacker Q80 14xs + CC HV80 doesn't work - 11/1/2012 12:37 PM   
rcpattern



Posts: 2654
Score: 100
Joined: 10/17/2003
Last Login: 5/20/2013
From: Great Mills, MD, USA
Status: offline 		The key is the end points. Out runner mode should work fine. Try the fixed end point settings with out runner mode and you should be fine.

Arch

_____________________________

Team Futaba, Castle Creations, Tech Aero Designs, Hacker Motors, F3A Unlimited, Team BJ Craft,

Hide Signatures

(in reply to hou_zhenyu)
       Post #: 6

RE: Hacker Q80 14xs + CC HV80 doesn't work - 11/1/2012 1:14 PM   
mups53


 

Posts: 1938
Score: 105
Joined: 1/15/2002
Last Login: 5/20/2013
From: Hoffman Estates, IL, USA
Status: online
quote:

ORIGINAL: hou_zhenyu


quote:

ORIGINAL: mups53

 We have customers using that combo with no problems. Last year I had 2 of the Q80 11S's and they ran fine on the CCHV80 Ice ESC. Mike

Hi, Mike

Are the customers using the exact same combo, Q80 14xs + CCHV80 Ice? If yes,  can you help to share the settings? Especially the timing, the PWM, startup power and Throttle response. And what's the propeller and RPM?
   http://www.f3aunlimited.com/webstore/index.php?main_page=page&id=13
 As said above theses are the settings. Should work fine. If it doesn't maybe there is a problem with the unit is all I can think. Mike



_____________________________

F3AUnlimited Customer Service
1 800 591 2875

Hide Signatures

(in reply to hou_zhenyu)
       Post #: 7

Page:   [1]
All Forums >> Electric Aircraft Universe >> Electric Pattern Aircraft >> Hacker Q80 14xs + CC HV80 doesn't work
Page: [1]





Jump to:


 
Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America


0.391RCU1