1/5th F4F wildcat/RCS 150????

1/5th F4F wildcat/RCS 150???? (Full Version)

All Forums >> [RC Airplanes] >> RC Warbirds and Warplanes

Message

DEVILDOG -> 1/5th F4F wildcat/RCS 150???? (11/14/2012 12:55 AM)
I'm in the process of building a Jerry Bates F4F. I was thinking of putting a RCS or Moki 150 in it. The scale prop is around 24 inches. These engines take a 26x14 I can get a 24x14 but will this combo work on the engine and 2nd question. Is this tooooo much for this size of bird ??? 50# of thrust on a 30+ lb airframe. I've never had these engines so would like to get some input. Thank you

2walla -> RE: 1/5th F4F wildcat/RCS 150???? (11/14/2012 3:27 AM)
I have looked at building a bates wildcat a couple of times. I have a 250 radial and it seems to me to really put out about as much power as a good 100 twin with 10x the maintenance and a lot more risk of it quitting. If i spent the time to build one i would put a good reliable 80 twin in it. The extra 5 lbs or so of motor is a lot to carry on a 91 in wing plane. Good luck which ever way you go.

BobH -> RE: 1/5th F4F wildcat/RCS 150???? (11/14/2012 3:35 AM)
I believe the limiting factor is the cowl diameter? My friend has a Saito 450 that flies his. His plane weights 36lbs. At 30lbs the 450 would work great. Saito is going to release the 450 glow as an FG84 gas in the near future. I believe the diameter of the Moki 150 is 10.2 inches. I don't know the exact diameter of the Saito 450. If I knew it would be helpful. The GT 80 twin flies the plane fine but I'm told its pretty fast with that engine. The problem being that that engine needs to rev for power so scale flight, slower, is more difficult. I've purchased a Glass Fuse for the Bates WildCat. I'm still looking at engines myself. Maybe next winters project.

2walla -> RE: 1/5th F4F wildcat/RCS 150???? (11/14/2012 3:43 AM)
Bob where did you get the glass fuse? Are you happy with it? Thanks, Mike

lrb75 -> RE: 1/5th F4F wildcat/RCS 150???? (11/14/2012 3:46 AM)
saito 450 is 237mm in diameter or 9 1/3" Come on Bob use the internet!

BobH -> RE: 1/5th F4F wildcat/RCS 150???? (11/14/2012 3:47 AM)
I'm happy I was able to purchase it. It's a glass fuse by Leo Spychalla. A friend was selling it so I purchased it. I won't pick it up till I see him in the spring. My other friend who is currently flying his Bates also has a glass fuse by Leo. He likes it. I didn't see the diameter specs for the 450! lol.. but thans Ross..

lrb75 -> RE: 1/5th F4F wildcat/RCS 150???? (11/14/2012 3:59 AM)
Oops actually the diameter is 250mm. It is 237mm wide. You would think they would choose D as diameter, but noooo they have to use H.

BobH -> RE: 1/5th F4F wildcat/RCS 150???? (11/14/2012 4:07 AM)
So its 10inches in Diameter. ok. The Moki is a bit wider. Maybe just enough wider so as to not fit the cowl.

carlbecker -> RE: 1/5th F4F wildcat/RCS 150???? (11/14/2012 1:49 PM)
The Saito 450r is a tight fit. If the Moki is any larger then it is a no go. Personally I believe the Moki to be far to much engine. The G-62 or G-80 or Laser 360 or Saito 450r have all powered the Bates Wildcat. I wish mine was a bit lighter.

vatechguy3 -> RE: 1/5th F4F wildcat/RCS 150???? (11/15/2012 2:40 AM)
where did you hear that saito is going to release the 450 as a gas engine? tony

BobH -> RE: 1/5th F4F wildcat/RCS 150???? (11/15/2012 4:06 AM)
Theres a youtube video of the FG84 being tested. I would think its another progression in the gas line up for Saito.

Flakbait -> RE: 1/5th F4F wildcat/RCS 150???? (11/15/2012 7:32 PM)
GT-80 has pleanty of power. My airplane is 37lbs with fuel. http://www.youtube.com/watch?v=KPRIoscS4NE&feature=BFa&list=FLZmafNTZ5JvVBa75HoMFZeQ http://www.youtube.com/watch?v=iyImUZJ6RNw&feature=BFa&list=FLZmafNTZ5JvVBa75HoMFZeQ&lf=plpp_video I don't think the Moki 150 will fit. I had to build an inverted motor box to get the GT-80 to fit. This design flies great!!

carlbecker -> RE: 1/5th F4F wildcat/RCS 150???? (11/16/2012 11:45 AM)
Saito is releasing a larger 3 cylinder engine at 84cc. The Saito 450r is 75cc. A bit different and I suspect larger. The 450 barely fits inside as is.

BobH -> RE: 1/5th F4F wildcat/RCS 150???? (11/16/2012 4:01 PM)
Will have to wait for the engine specs to be released to see if it fits. Would be nice to get this plane around the 30-32lbs. Not sure that's possible but maybe.

warks62 -> RE: 1/5th F4F wildcat/RCS 150???? (11/18/2012 12:03 AM)
Here is a link to a article of one with the Moki 150. I have seen it fly and it does not seem to be over powered, in fact flies it very well. There is also a link to a Youtube video of it. http://www.modelairplanenews.com/blog/2011/04/29/awesome-wildcat/ http://www.youtube.com/watch?v=rWXv_e4NmYU

DEVILDOG -> RE: 1/5th F4F wildcat/RCS 150???? (11/18/2012 2:49 PM)
warks62. Thank you for the answering my actual question. I wish there were an actual video of it rather than a bunch of pictures but cool non the less. Where does one get a solo brand prop from????? thanks

BobH -> RE: 1/5th F4F wildcat/RCS 150???? (11/18/2012 3:19 PM)
I wonder if anyone knows how to get in touch with Frank Harris the builder of the plane. Has to sound awsome with the Moki150.

DEVILDOG -> RE: 1/5th F4F wildcat/RCS 150???? (11/18/2012 5:10 PM)
BobH...I agree, it would be awsome. Also I wish the build would get down to the 30lb range but the fiber glass fuse is STOUT to say the least. Beutiful glass work by Leo.

BobH -> RE: 1/5th F4F wildcat/RCS 150???? (11/18/2012 7:30 PM)
I won't get my Glass Fuse until the Toledo show. So I have mucho time to decide. I probably wont be buildint the plane until the following year.

warks62 -> RE: 1/5th F4F wildcat/RCS 150???? (11/18/2012 9:30 PM)
Sorry I wish I had more info on it. It has competed the last two years at Top Gun and hopefully 2013 US Scale Masters. Frank did a fantastic job building it I have seen it now a few times makes me want to build one. Solo Props are at www.soloprops.com

rslstft -> RE: 1/5th F4F wildcat/RCS 150???? (11/18/2012 10:56 PM)
You can try contacting Frank Harris through the Pomona Valley Model Airplane Club in Chino, CA. www.PVMAC.com Kyle Goodwine was the pilot and his dad is the president of the club.

carlbecker -> RE: 1/5th F4F wildcat/RCS 150???? (11/19/2012 11:54 AM)
It is great to hear that the Moki 150 fits. That and the 250 are the best sounding radials I have heard.

Page: [1]

SITE MAP! : : FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

0.125